Engine

-€52.92

S&S CYCLE 640 Cam — 640 Series grind, Gear

High-performance camshaft for large-displacement and select mid-size engines; designed for hydraulic tappets. Installer must check clearances and use high-lift springs.

€205.82 €258.74

V80 Long-Block Engine — 80 cu in, 4.250" stroke, 8.4:1, Wrinkle Black

-€188.63

S&S CYCLE V80 Long-Block Engine — 80 cu in, 4.250" stroke, 8.4:1,...

Stock-height long-block replacement for Evolution engines. Includes performance heads, pistons, valve springs and a 508 camshaft. EFI compatible; fuel/ignition sold separately.

€5,344.73 €5,533.36

-€2.65

S&S CYCLE Cam Bearing Retention Plate — 33-5212

Durable retention plate for gear-drive cam systems. Recommended for use with gear-drive cams. Made in the U.S.A.

€10.28 €12.93

-€189.19

S&S CYCLE V80 Long-Block Engine — 80" displacement, 4.25" stroke, Silver

Stock-height long-block; direct bolt-in replacement for aging H‑D Evolution engines. Machined heads accept stock-length manifolds. Includes S&S heads, oil pump, flat-top pistons, 585 springs, forged rockers and 508 cam. Fuel/ignition not included; EFI compatible (tune required). Made in the USA.

€5,360.44 €5,549.63

96" Sidewinder® Engine Performance Kit — 3.625" bore, 4.625" stroke, 9.75:1 compression

-€544.39

S&S CYCLE 96" Sidewinder® Engine Performance Kit — 3.625" bore, 4.625"...

Complete S&S Sidewinder® performance kit with flywheel assembly, stroker big bore cylinder, pistons, rings and gaskets. Made in USA. Some installation parts and machine work required.

€2,117.08 €2,661.47

V80 Complete Assembled Engine — 80 cu in, 4.250 in stroke, Wrinkle Black

-€224.10

S&S CYCLE V80 Complete Assembled Engine — 80 cu in, 4.250 in stroke,...

Carbureted V80 assembled engine that fits stock '84–'99 Evolution Big Twin frames; upgraded S&S carburetor, cam, heads, and single-fire ignition.

€6,349.69 €6,573.79

-€338.73

S&S CYCLE Hooligan Engine Performance Kit — 1200 cc, Wrinkle Black

Bolt-on performance kit with bolt-in cams and premium tappets. Easy installation with no machining or rebalancing. Uses stock heads, pushrods, and fuel system.

€1,317.28 €1,656.01

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

-€294.08

S&S CYCLE T111 Long Block Engine — 111 cu in, 9.8:1 compression, Chrome

Super Stock™ heads and crankcase, Easy start 585 gear drive cams, and TC3 oil pump. Intake not included; compatible with stock and aftermarket systems.

€8,332.33 €8,626.41

110" Power Package Performance Kit — 4" bore, 10.5:1 compression, Black

-€717.12

S&S CYCLE 110" Power Package Performance Kit — 4" bore, 10.5:1...

Complete S&S 110" big-bore performance kit with 4" cylinders, 10.5:1 pistons and 585 cams; fits stock heads.

€2,788.77 €3,505.89

124" Power Package for Water Cooled 107" M8 — 4.250" bore, water-cooled, Wrinkle Black

-€783.12

S&S CYCLE 124" Power Package for Water Cooled 107" M8 — 4.250" bore,...

Complete bolt-on big bore kit with forged pistons, billet-machined components, S&S cam and tappets. No case machining required.

€2,279.75 €3,062.87

124" Power Package for Oil Cooled 107" M8 — 4.250" bore, 11:1 compression

-€799.78

S&S CYCLE 124" Power Package for Oil Cooled 107" M8 — 4.250" bore, 11:1...

Complete bolt-on big-bore upgrade kit with precision-machined components, forged pistons and serviceable oiling features for reliable performance.

€2,328.25 €3,128.03

-€192.09

S&S CYCLE 510G Camshaft Kit — 510 Series grind, Intake 238° / Exhaust 252°

Bolt-in camshaft kit for 88", 95", 96" and 103" engines; includes cam drive gear kit and installation hardware. Made in USA.

€747.05 €939.14

128" Power Package for 114"/117" Oil Cooled M8 — 128", 4.250" bore, 4.500" stroke, 11.1:1, Wrinkle Black

-€734.60

S&S CYCLE 128" Power Package for 114"/117" Oil Cooled M8 — 128", 4.250"...

Complete bolt-on big-bore kit that raises displacement without case machining. Includes cylinders, forged pistons, upgraded oil pump/cam plate, valvetrain hardware, and all gaskets and bearings for installation.

€2,856.80 €3,591.40

T124 Low Compression Long Block Engine — 124 cu in, 4.125" bore, 4.625" stroke, Black

-€2,276.24

S&S CYCLE T124 Low Compression Long Block Engine — 124 cu in, 4.125"...

Includes Super Stock™ heads, T2 crankcase and high-flow oil pump; fits stock-length intake manifolds. No fuel or ignition systems included.

€8,961.60 €11,237.84

128" Power Package Engine Performance Kit — 4.250" bore, 4.500" stroke, 11.1:1

-€799.78

S&S CYCLE 128" Power Package Engine Performance Kit — 4.250" bore,...

Bolt-on big-bore performance kit that increases displacement with forged pistons, S&S 550 cams, enhanced oiling and all gaskets and hardware for installation. Made in the U.S.A.

€2,328.25 €3,128.03

-€15.15

S&S CYCLE Head Installation Gasket Set — Bore 3.500"

Contains head gaskets, base gaskets and exhaust pipe gaskets. Rocker box gaskets not included. Made in the USA.

€58.91 €74.06

-€124.46

S&S CYCLE Gear for Gear-Driven Cams — Cam

Four-gear set for gear-driven cams; includes secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware.

May increase valve train noise; oversized and undersized gears available. Made in the U.S.A.

€484.05 €608.51

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

-€39.93

S&S CYCLE Gasket Kit — Bore 4.125"

Contains high-quality gaskets. Made in the USA. Rocker box gaskets sold separately.

€155.59 €195.52

-€66.39

S&S CYCLE GASKETHD 3.625"SHVL — PN 93-1062

Precision gasket for 3.625 in bore shafts; durable composite construction for reliable sealing.

€109.15 €175.54

128" Power Package Engine Performance Kit — 128", 4.250" bore, 4.500" stroke, 11.1:1, Black Granite

-€679.94

S&S CYCLE 128" Power Package Engine Performance Kit — 128", 4.250" bore,...

Bolt-on big-bore kit for M-Eight engines. Includes forged pistons, S&S oil pump/cam plate, cams, springs, pushrods, premium tappets, gaskets, bearings, and hardware. Made in the U.S.A.

€2,644.23 €3,324.17

-€8.90

S&S CYCLE GASKETBASE 74/80"SHVL — S&S CYCLE, 93-1070

Precision-cut gasket base for 74/80" SHVL engines; ensures reliable sealing and fitment.

€28.08 €36.98

-€34.68

S&S CYCLE Cam Chain Tensioner — Twin Cam 07-17 & 99-06 fit, Aluminum

Improves timing stability and chain lubrication for Twin Cam engines. Fits stock 07-17 and 99-06 with a hydraulic upgrade. Thicker pad, replaceable shoes, and chain oiling feature for extended service life.

€134.88 €169.56

$128\" Power Package for 114\"/117\" Oil Cooled M8 —4.25\" bore, 4.5\" stroke$

-€693.06

S&S CYCLE 128\" Power Package for 114\"/117\" Oil Cooled M8 —4.25\"...

Complete bolt‑on big‑bore kit to increase 114\"/117\" M‑Eight engines to 128\"; includes cylinders, forged pistons, S&S 550 cam, oil pump/cam plate and all gaskets and hardware.

€2,695.25 €3,388.31

MK136 Black Edition Engine with 550G Cam — 136", black powder coat

-€370.31

S&S CYCLE MK136 Black Edition Engine with 550G Cam — 136", black powder...

Race-ready MK136 Black Edition engine with 550G cam, oversized valves, forged pistons and enlarged oil sump; retains stock engine height.

€10,492.18 €10,862.49

-€33.10

S&S CYCLE Gasket Base 3.625"SHVL — 3.625 in

Gasket base for 3.625" bore applications. Machined, durable construction for consistent sealing.

€41.64 €74.74

Cam Chain Tensioner — 2007–2017 Twin Cam, 1999–2006 Twin Cam (hydraulic upgrade), White

-€8.15

S&S CYCLE Cam Chain Tensioner — 2007–2017 Twin Cam, 1999–2006 Twin Cam...

Precision cam chain tensioner for Twin Cam engines with improved piston stability, thicker wear pad, replaceable shoes, and chain-oiling feature.

€31.72 €39.87

-€11.85

S&S CYCLE U-Ring — 44–45 mm, intake manifold

Seals CV carb to S&S intake manifolds; made in the USA.

€27.64 €39.49

-€11.85

S&S CYCLE U-Ring — 40–42 mm

Seals CV carburetor to S&S intake manifolds. Allows proper sealing for reliable performance. Made in the USA.

€27.64 €39.49

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine