Engine

-€52.92

S&S CYCLE 640 Cam — 640 Series grind, Gear

High-performance camshaft for large-displacement and select mid-size engines; designed for hydraulic tappets. Installer must check clearances and use high-lift springs.

€205.82 €258.74

V80 Long-Block Engine — 80 cu in, 4.250" stroke, 8.4:1, Wrinkle Black

-€188.63

S&S CYCLE V80 Long-Block Engine — 80 cu in, 4.250" stroke, 8.4:1,...

Stock-height long-block replacement for Evolution engines. Includes performance heads, pistons, valve springs and a 508 camshaft. EFI compatible; fuel/ignition sold separately.

€5,344.73 €5,533.36

-€2.65

S&S CYCLE Cam Bearing Retention Plate — 33-5212

Durable retention plate for gear-drive cam systems. Recommended for use with gear-drive cams. Made in the U.S.A.

€10.28 €12.93

-€189.19

S&S CYCLE V80 Long-Block Engine — 80" displacement, 4.25" stroke, Silver

Stock-height long-block; direct bolt-in replacement for aging H‑D Evolution engines. Machined heads accept stock-length manifolds. Includes S&S heads, oil pump, flat-top pistons, 585 springs, forged rockers and 508 cam. Fuel/ignition not included; EFI compatible (tune required). Made in the USA.

€5,360.44 €5,549.63

96" Sidewinder® Engine Performance Kit — 3.625" bore, 4.625" stroke, 9.75:1 compression

-€544.39

S&S CYCLE 96" Sidewinder® Engine Performance Kit — 3.625" bore, 4.625"...

Complete S&S Sidewinder® performance kit with flywheel assembly, stroker big bore cylinder, pistons, rings and gaskets. Made in USA. Some installation parts and machine work required.

€2,117.08 €2,661.47

V80 Complete Assembled Engine — 80 cu in, 4.250 in stroke, Wrinkle Black

-€224.10

S&S CYCLE V80 Complete Assembled Engine — 80 cu in, 4.250 in stroke,...

Carbureted V80 assembled engine that fits stock '84–'99 Evolution Big Twin frames; upgraded S&S carburetor, cam, heads, and single-fire ignition.

€6,349.69 €6,573.79

-€338.73

S&S CYCLE Hooligan Engine Performance Kit — 1200 cc, Wrinkle Black

Bolt-on performance kit with bolt-in cams and premium tappets. Easy installation with no machining or rebalancing. Uses stock heads, pushrods, and fuel system.

€1,317.28 €1,656.01

-€56.72

SW-MOTECH Engine Guard — Black

The Engine Guard provides essential underbody protection for your Harley-Davidson against rock chips and collisions. It features easy installation with no modifications needed, ensuring a perfect fit.

€220.59 €277.31

-€294.08

S&S CYCLE T111 Long Block Engine — 111 cu in, 9.8:1 compression, Chrome

Super Stock™ heads and crankcase, Easy start 585 gear drive cams, and TC3 oil pump. Intake not included; compatible with stock and aftermarket systems.

€8,332.33 €8,626.41

110" Power Package Performance Kit — 4" bore, 10.5:1 compression, Black

-€717.12

S&S CYCLE 110" Power Package Performance Kit — 4" bore, 10.5:1...

Complete S&S 110" big-bore performance kit with 4" cylinders, 10.5:1 pistons and 585 cams; fits stock heads.

€2,788.77 €3,505.89

124" Power Package for Water Cooled 107" M8 — 4.250" bore, water-cooled, Wrinkle Black

-€783.12

S&S CYCLE 124" Power Package for Water Cooled 107" M8 — 4.250" bore,...

Complete bolt-on big bore kit with forged pistons, billet-machined components, S&S cam and tappets. No case machining required.

€2,279.75 €3,062.87

124" Power Package for Oil Cooled 107" M8 — 4.250" bore, 11:1 compression

-€799.78

S&S CYCLE 124" Power Package for Oil Cooled 107" M8 — 4.250" bore, 11:1...

Complete bolt-on big-bore upgrade kit with precision-machined components, forged pistons and serviceable oiling features for reliable performance.

€2,328.25 €3,128.03

-€192.09

S&S CYCLE 510G Camshaft Kit — 510 Series grind, Intake 238° / Exhaust 252°

Bolt-in camshaft kit for 88", 95", 96" and 103" engines; includes cam drive gear kit and installation hardware. Made in USA.

€747.05 €939.14

128" Power Package for 114"/117" Oil Cooled M8 — 128", 4.250" bore, 4.500" stroke, 11.1:1, Wrinkle Black

-€734.60

S&S CYCLE 128" Power Package for 114"/117" Oil Cooled M8 — 128", 4.250"...

Complete bolt-on big-bore kit that raises displacement without case machining. Includes cylinders, forged pistons, upgraded oil pump/cam plate, valvetrain hardware, and all gaskets and bearings for installation.

€2,856.80 €3,591.40

T124 Low Compression Long Block Engine — 124 cu in, 4.125" bore, 4.625" stroke, Black

-€2,276.24

S&S CYCLE T124 Low Compression Long Block Engine — 124 cu in, 4.125"...

Includes Super Stock™ heads, T2 crankcase and high-flow oil pump; fits stock-length intake manifolds. No fuel or ignition systems included.

€8,961.60 €11,237.84

128" Power Package Engine Performance Kit — 4.250" bore, 4.500" stroke, 11.1:1

-€799.78

S&S CYCLE 128" Power Package Engine Performance Kit — 4.250" bore,...

Bolt-on big-bore performance kit that increases displacement with forged pistons, S&S 550 cams, enhanced oiling and all gaskets and hardware for installation. Made in the U.S.A.

€2,328.25 €3,128.03

-€15.15

S&S CYCLE Head Installation Gasket Set — Bore 3.500"

Contains head gaskets, base gaskets and exhaust pipe gaskets. Rocker box gaskets not included. Made in the USA.

€58.91 €74.06

-€124.46

S&S CYCLE Gear for Gear-Driven Cams — Cam

Four-gear set for gear-driven cams; includes secondary cam gears, outer cam drive gear, outer pinion drive gear and mounting hardware.

May increase valve train noise; oversized and undersized gears available. Made in the U.S.A.

€484.05 €608.51

-€39.93

S&S CYCLE Gasket Kit — Bore 4.125"

Contains high-quality gaskets. Made in the USA. Rocker box gaskets sold separately.

€155.59 €195.52

-€66.39

S&S CYCLE GASKETHD 3.625"SHVL — PN 93-1062

Precision gasket for 3.625 in bore shafts; durable composite construction for reliable sealing.

€109.15 €175.54

128" Power Package Engine Performance Kit — 128", 4.250" bore, 4.500" stroke, 11.1:1, Black Granite

-€679.94

S&S CYCLE 128" Power Package Engine Performance Kit — 128", 4.250" bore,...

Bolt-on big-bore kit for M-Eight engines. Includes forged pistons, S&S oil pump/cam plate, cams, springs, pushrods, premium tappets, gaskets, bearings, and hardware. Made in the U.S.A.

€2,644.23 €3,324.17

-€8.90

S&S CYCLE GASKETBASE 74/80"SHVL — S&S CYCLE, 93-1070

Precision-cut gasket base for 74/80" SHVL engines; ensures reliable sealing and fitment.

€28.08 €36.98

-€34.68

S&S CYCLE Cam Chain Tensioner — Twin Cam 07-17 & 99-06 fit, Aluminum

Improves timing stability and chain lubrication for Twin Cam engines. Fits stock 07-17 and 99-06 with a hydraulic upgrade. Thicker pad, replaceable shoes, and chain oiling feature for extended service life.

€134.88 €169.56

$128\" Power Package for 114\"/117\" Oil Cooled M8 —4.25\" bore, 4.5\" stroke$

-€693.06

S&S CYCLE 128\" Power Package for 114\"/117\" Oil Cooled M8 —4.25\"...

Complete bolt‑on big‑bore kit to increase 114\"/117\" M‑Eight engines to 128\"; includes cylinders, forged pistons, S&S 550 cam, oil pump/cam plate and all gaskets and hardware.

€2,695.25 €3,388.31

MK136 Black Edition Engine with 550G Cam — 136", black powder coat

-€370.31

S&S CYCLE MK136 Black Edition Engine with 550G Cam — 136", black powder...

Race-ready MK136 Black Edition engine with 550G cam, oversized valves, forged pistons and enlarged oil sump; retains stock engine height.

€10,492.18 €10,862.49

-€33.10

S&S CYCLE Gasket Base 3.625"SHVL — 3.625 in

Gasket base for 3.625" bore applications. Machined, durable construction for consistent sealing.

€41.64 €74.74

Cam Chain Tensioner — 2007–2017 Twin Cam, 1999–2006 Twin Cam (hydraulic upgrade), White

-€8.15

S&S CYCLE Cam Chain Tensioner — 2007–2017 Twin Cam, 1999–2006 Twin Cam...

Precision cam chain tensioner for Twin Cam engines with improved piston stability, thicker wear pad, replaceable shoes, and chain-oiling feature.

€31.72 €39.87

-€11.85

S&S CYCLE U-Ring — 44–45 mm, intake manifold

Seals CV carb to S&S intake manifolds; made in the USA.

€27.64 €39.49

-€11.85

S&S CYCLE U-Ring — 40–42 mm

Seals CV carburetor to S&S intake manifolds. Allows proper sealing for reliable performance. Made in the USA.

€27.64 €39.49

Billet Tappet Covers — Polished, 6061 T-6 aluminum

-€110.52

S&S CYCLE Billet Tappet Covers — Polished, 6061 T-6 aluminum

CNC-machined tappet covers that improve strength and dimensional stability. Made in the U.S.A.; designed for reliable sealing and fit.

€138.85 €249.37

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine