Engine (23)

Race Series® Camchest Kit — Chain, 630 Series

-€631.24

FEULING OIL PUMP CORP. Race Series® Camchest Kit — Chain, 630 Series

Complete camchest kit with high-flow components, bearings, gaskets and hardware for reliable operation and cooler engine and oil temperatures.

€1,783.97 €2,415.21

-€16.34

FEULING OIL PUMP CORP. Undersize Crankshaft Bearing Race Kit — 5206

Press-on undersize crankshaft bearing races for right and left sides, includes left-side thrust washers; enables repair and remachining after race spinning. Made in USA.

€63.57 €79.91

-€14.51

FEULING OIL PUMP CORP. Short Sump Plug — 6-pack

Prevents blockage of the scavenge pickup hole and keeps the M8 cross-sump port clear so the oil pump can pull maximum oil from the sump.

€56.42 €70.93

-€35.73

JAMES GASKET Top End Gasket Kit — 1.02 mm (0.040 in) thickness, MLS

Complete set of gaskets, oil seals and O-rings for top-end engine rebuilds. Made in the USA.

€121.45 €157.18

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D., 0.788" I.D., 1.065" O.L.

Made to exact tolerances; does not include oil holes; made in USA.

€6.76 €9.16

Dual Spray Piston Cooling Jet Kit — Anodized aluminum

-€19.38

S&S CYCLE Dual Spray Piston Cooling Jet Kit — Anodized aluminum

Dual Spray jet kit cools both intake and exhaust piston sides for improved power and durability. Shortened nozzle increases rod clearance. Includes hardware and gaskets.

€75.56 €94.94

-€41.68

JAMES GASKET Top End Gasket Kit — MLS, 1.02 mm (0.040")

Complete set of gaskets, oil seals and O-rings for a top-end engine rebuild. Made in the United States.

€141.72 €183.40

-€2.28

S&S CYCLE Intake Manifold O-Ring — Black, Stock

Precision replacement seal for the engine intake system. Made from high-quality materials and manufactured in the USA for reliable, long-lasting performance.

€8.89 €11.17

-€40.41

JAMES GASKET Complete Motor Gasket Kit — Bore 3.500", Thickness 1.02 mm

Contains gaskets, oil seals and O-rings necessary to completely rebuild an engine. Made in the USA.

€137.40 €177.81

-€7.65

EASTERN MOTORCYCLE PARTS Flywheel Thrust Washers — +0.005"

Meets or exceeds OEM specification.

Replacement-type, made in the USA.

€21.60 €29.25

Top End Gasket Kit — Bore 4.000", thickness 0.51 mm (0.020"), 1.14 mm (0.045")

-€30.21

JAMES GASKET Top End Gasket Kit — Bore 4.000", thickness 0.51 mm (0.020"),...

Complete set of top-quality gaskets, oil seals and O-rings for engine top-end rebuilds. Made in the USA.

€102.69 €132.90

3-D Skull Points Cover — 0.750 in protrusion, Chrome

-€7.44

DRAG SPECIALTIES 3-D Skull Points Cover — 0.750 in protrusion, Chrome

Bold 3-D skull styling for your points cover; skull protrudes ~0.750 in for strong dimensional impact. Installs using existing mounting points.

€21.01 €28.45

-€37.95

JAMES GASKET Complete Motor Gasket Kit — Bore 3.50", Thickness 1.02 mm, MLS

Contains gaskets, oil seals and O-rings necessary to completely rebuild an engine. Made in the USA.

€129.05 €167.00

Race Series® Conversion Chain Drive Camchest Kit — Chain, Kit

-€478.78

FEULING OIL PUMP CORP. Race Series® Conversion Chain Drive Camchest Kit — Chain, Kit

Converts mechanical cams and tensioners to a hydraulic chain-drive system to lower engine and oil temperatures and provide higher, consistent oil pressure; complete installation kit.

€1,861.92 €2,340.70

-€8.32

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Bold 3-D skull styling with approximately .750" projection for a standout accent.

€23.50 €31.82

-€30.72

JAMES GASKET Top End Gasket Kit — 3.750" bore, 1.17 mm (0.046")

Includes top-quality gaskets, oil seals and O-rings required for engine rebuilds. Made in the USA.

€104.44 €135.16

HP+® Camchest Kit — 543 Series grind, Chain drive

-€382.08

FEULING OIL PUMP CORP. HP+® Camchest Kit — 543 Series grind, Chain drive

Complete top-to-bottom upgrade kit that lowers engine and oil temperatures, raises oil pressure, eliminates wet sumping and improves smoothness and reliability; fits '07-'17 Twin Cam and '06 Dyna.

€1,485.86 €1,867.94

-€8.11

DRAG SPECIALTIES 3-D Skull Points Cover — Chrome

Striking 3-D skull design that protrudes about 0.750"; adds custom attitude while maintaining function.

€22.92 €31.03

-€30.72

JAMES GASKET Top End Gasket Kit — Bore 3.750", Thickness 1.17 mm

Complete kit of gaskets, oil seals and O-rings for top-end engine rebuilds. Made in the USA.

€104.44 €135.16

Die-Cast Head Bolt Covers — 4 Pack, Chrome

-€8.02

DRAG SPECIALTIES Die-Cast Head Bolt Covers — 4 Pack, Chrome

Precision die-cast head bolt covers; includes setscrews and hex wrench for easy installation.

€22.67 €30.69

-€391.28

S&S CYCLE Cam Chest Kit for M8 — 465G grind, water-cooled

Complete cam chest kit engineered for improved oil flow, precise cam timing and durable, serviceable construction. Includes tappets, pushrods, outer drive gears and all installation hardware.

€1,521.66 €1,912.94

Complete Motor Gasket Kit — Bore 3.750", Thickness 0.91 mm, JGI-17053-05-X

-€34.11

JAMES GASKET Complete Motor Gasket Kit — Bore 3.750", Thickness 0.91 mm,...

Contains gaskets, oil seals and O-rings needed to rebuild an engine. Made in the USA.

€115.95 €150.06

-€371.80

S&S CYCLE 106" Stroker Flywheel Kit — 4-1/2" stroke

Three-piece assembled flywheels; no motor case modification required. Fuel-injected motors need recalibration. Professional installation recommended.

€1,445.91 €1,817.71

-€3.73

COLONY Fork Stem Nut Cap — fork tube, silver

Protects threads and provides a finished appearance; durable plated construction for long-lasting performance.

€10.55 €14.28

-€30.72

JAMES GASKET Top End Gasket Kit — Bore 3.875 in, Thickness 0.91 mm

Complete top-end gasket kit with gaskets, oil seals and O-rings. Made in the USA.

€104.44 €135.16

-€359.41

S&S CYCLE Cam Chest Kit for M8 — 475G grind, blue anodized

Complete cam chest kit for M8 engines with billet aluminum pump and cam plate, adjustable pressure relief valve, improved oil flow, debris magnet, finished pushrod tubes, premium tappets, and all gaskets, bearings and hardware for a complete installation. Made in the USA.

€1,397.73 €1,757.14

-€2.50

COLONY Fuel Tank Mounting Grommet Kit — Fuel Tank, Black

Includes 6 rubber grommets and 2 metal sleeves. One kit required per set. Made in the United States.

€9.69 €12.19

$Top End Gasket Kit — Bore 3.875\", Thickness 1.02 mm$

-€39.45

JAMES GASKET Top End Gasket Kit — Bore 3.875\", Thickness 1.02 mm

Top-quality gaskets, oil seals and O-rings for top-end engine rebuilds.

Made in the USA.

€134.14 €173.59

-€397.94

S&S CYCLE Cam Chest Kit for M8 — Water-cooled, 465G grind

Complete cam chest kit for M8 engines with matched components, billet-aluminum oil pump and cam plate, debris screens, adjustable pressure relief valve, S&S Quickee pushrods and premium tappets. Includes gaskets, bearings, drive gears, and hardware for full installation.

€1,547.52 €1,945.46

$Complete Motor Gasket Kit — Bore 3.875\", Thickness 1.17 mm$

-€33.17

JAMES GASKET Complete Motor Gasket Kit — Bore 3.875\", Thickness 1.17 mm

Contains gaskets, oil seals and O-rings to completely rebuild an engine. Made in the USA.

€112.77 €145.94

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine