Engine (20)

Race Series® Camchest Kit with Short Travel Lifters — 538 Series, Chain

-€524.39
Out of Stock

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — 538...

High‑volume Race Series® camchest kit with short travel hydraulic lifters; increases oil pressure and scavenge flow, reduces oil/engine temperatures; complete hardware kit included.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Full Travel Lifters — Chain, 538 Series

-€524.39
Out of Stock

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Full Travel Lifters — Chain,...

Quieter, smoother engine operation with increased oil pressure and cooler running temperatures; full-travel hydraulic roller lifters and heavy-duty pushrods included.

€2,039.30 €2,563.69

Race Series® Camchest Kit with Short Travel Lifters — Chain, Kit, 538 Series

-€524.39
Out of Stock

FEULING OIL PUMP CORP. Race Series® Camchest Kit with Short Travel Lifters — Chain,...

High-volume Race Series® camchest kit with short travel (0.115") hydraulic lifters. Increases oil pressure and scavenge volume, reduces wet sumping and valve float. Includes pump, camplate, camshaft, lifters, pushrods, bearings, hardware and gaskets. Made in USA. Not for '23-'24 121" VVT models.

€2,039.30 €2,563.69

Cam Chest Kit without Cams for Gear Drive Twin Cam — Oil cooled, Chrome

-€249.93
Out of Stock

S&S CYCLE Cam Chest Kit without Cams for Gear Drive Twin Cam — Oil...

Complete cam chest kit (without cams) for Gear Drive Twin Cam — improves oil flow, reduces valve-train noise, and includes pushrods, tappets, and tappet cuffs.

€973.86 €1,223.79

-€86.39
Out of Stock

S&S CYCLE Camshaft 474C — 330-0293

Bolt-in OES camshaft that maintains stock timing; no tuning required.

€336.65 €423.04

-€213.10
Out of Stock

S&S CYCLE 570G Camshaft Kit — 88–103 CID, gear drive

High-performance camshaft kit for 88–103 CID engines that improves valve timing accuracy and boosts performance around 3200–3700 rpm. Professional installation required.

€828.74 €1,041.84

-€213.10
Out of Stock

S&S CYCLE 585G Gear Drive Camshaft Kit — Gear, 585 Series, S&S CYCLE

Gear-drive camshaft kit for 88–110 cu in engines; increases timing accuracy and enables higher lifts. Requires inner cover material removal, a hydraulic press and professional installation.

€828.74 €1,041.84

-€104.52
Out of Stock

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€2.60
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.007", 10 pack

Precision shims for accurate cam end play setup. A must when setting up new cams. Made in the USA.

€7.35 €9.95

-€9.32
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Cover Bushing — A-25581-36

Precision-machined bushing for cam cover applications. Durable, low-friction design. Made in the U.S.A.

€26.35 €35.67

$Cam Shims — 0.050\", 5 Pack$

-€4.69
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.050\", 5 Pack

Precision cam shims for accurate valve clearance and cam alignment. Made in the U.S.A.

€13.30 €17.99

-€4.69
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.075", 5 Pack

Precision shims for adjusting camshaft position and valve timing. Made in the U.S.A.

€13.30 €17.99

$Cam Shims — 0.080\" 5 pack$

-€4.69
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Shims — 0.080\" 5 pack

High-precision shims for accurate clearance adjustment. Made in the U.S.A.

€13.30 €17.99

-€12.53
Out of Stock

JIMS Pinion Shaft Bushing — 1.0035", PN 25582-54/73

Quality pinion shaft bushing. Made in the U.S.A.

€48.70 €61.23

Idler Gear & Circuit Breaker Bushings — Pair

-€5.71
Out of Stock

EASTERN MOTORCYCLE PARTS Idler Gear & Circuit Breaker Bushings — Pair

Precision idler gear and circuit breaker bushings engineered for reliable alignment and reduced wear.

€16.17 €21.88

-€14.11
Out of Stock

JIMS Circuit Breaker Shaft Kit — JIMS, 25856-KIT

Includes a shaft and two replacement bushings; restores circuit breaker operation. Manufactured in the United States.

€54.90 €69.01

-€24.91
Out of Stock

S&S CYCLE Pinion Gear — 1.4737"–1.4745"

High-quality pinion gears: carefully machined, heat-treated and finish-ground. Made in the USA.

€96.90 €121.81

-€2.59
Out of Stock

EASTERN MOTORCYCLE PARTS Retaining Ring — 10 pack

Durable stamped retaining ring for reliable axial retention. Made in the U.S.A.

€7.33 €9.92

-€29.28
Out of Stock

S&S CYCLE Pinion Gear — 1.4470"–1.4475"

Precision-machined, heat-treated and finish ground pinion gear for reliable performance. Made in the USA.

€113.84 €143.12

-€24.91
Out of Stock

S&S CYCLE Pinion Gear — 1.4715"–1.4721"

Precision-machined and finish-ground pinion gear. Made in the USA.

€96.90 €121.81

Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

-€29.50
Out of Stock

JIMS Motor Sprocket Shaft Spacer Kit — 0.366–0.666 in, 8-pack

Eight-piece spacer kit machined to a 32-micron, burr-free finish for extended seal life; fits the sprocket shaft oil seal.

€114.73 €144.23

Cam Cover Bushing — 1.0035" diameter, bronze

-€8.74
Out of Stock

JIMS Cam Cover Bushing — 1.0035" diameter, bronze

Precision machined cam cover bushing with .0002" tolerance and installation lead-in. Made in the U.S.A.

€33.99 €42.73

$Cam Cover Bushing — 0.9405\" bronze$

-€11.26
Out of Stock

JIMS Cam Cover Bushing — 0.9405\" bronze

Precision machined cam cover bushing with lead-in for easy installation. Made in the U.S.A.

€43.78 €55.04

-€101.56
Out of Stock

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63
Out of Stock

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€57.28
Out of Stock

S&S CYCLE 514 Camshaft — 84–93 cu in, ≤9:1

Proven 514 camshaft for 84–93 cu in motors. Optimized for 2,500–5,000 rpm midrange performance. Requires spring spacing and high-performance lifters; installer must verify clearances.

€222.75 €280.03

-€44.64
Out of Stock

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine