Electrical & Ignition

2000I PC Programmable Electronic Ignition Kit — DYNATEK, Dyna 2000 Series, D2KI-1P

-€57.03

DYNATEK-HARLEY 2000I PC Programmable Electronic Ignition Kit — DYNATEK, Dyna...

Self-contained PC-programmable ignition module with single- or dual-fire modes, ten advance curves, adjustable over-rev protection and comprehensive data logging.

€221.77 €278.80

2000I PC Programmable Electronic Ignition Kit — Dyna 2000 Series, Twin

-€98.42

DYNATEK-HARLEY 2000I PC Programmable Electronic Ignition Kit — Dyna 2000...

Self-contained ignition module fits under the cam cover. Single- or dual-fire operation, ten advance curves, PC-programmable. Not for fuel-injected models. Made in the USA.

€382.74 €481.16

Dyna 2000TC Programmable Digital Performance Ignition Module — Black

-€64.08

DYNATEK-HARLEY Dyna 2000TC Programmable Digital Performance Ignition Module —...

Single-fire, fully programmable ignition with 16 advance curves, 8 rev limiter settings, PC programmability, coil-current monitoring and data logging; made in USA.

€249.24 €313.32

2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000 Series, 7-pin connector, black

-€52.64

DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000...

PC-programmable plug-in ignition upgrade with four advance curves, selectable rev limits, diagnostic LED and separate tach output.

€204.72 €257.36

2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000 Series, 8-pin, black

-€52.64

DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000...

PC-programmable microcomputer ignition module with four advance curves and four rev limiter settings (6000–7500 rpm). Separate tach output and diagnostic LED. Not for fuel-injected models.

€204.72 €257.36

-€57.22

DYNATEK-HARLEY Dyna 2000TC-3 Digital Performance Ignition Module — Black

Digital performance unit with 16 advance curves, adjustable rev limiter (5,750–7,500 rpm), and single‑connector installation. Made in the U.S.A.

€222.51 €279.73

-€57.03

DYNATEK-HARLEY Dyna 2000TC-3 Digital Performance Ignition Module — Black

Digital performance ignition module with 16 advance curves and an adjustable rev limiter from 5,750–7,500 rpm.

€221.77 €278.80

Ignition Booster Module — Mechanical (Points), Single-point, Black

-€45.37

DYNATEK Ignition Booster Module — Mechanical (Points), Single-point,...

Converts inconsistent surges into controlled bursts for stronger ignition, reduces current to 0.1 amp to prevent burned points, and delivers a 50% faster spark voltage rise.

€143.17 €188.54

-€38.91

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, dual-plug

High-output miniature coil for Dyna 2000/3000 and dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam or Dyna "S"/DYNA III and earlier.

€151.32 €190.23

-€25.18

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, Dual-Plug, Black

Compact, high-output coil for customs and concealed installation. Works with Dyna 2000 and 3000 series and with aftermarket dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam, Dyna "S", DYNA III or earlier.

€97.90 €123.08

-€38.92

DYNATEK 0.5 Ohm Miniature Coil — 12V, Black, Pair

Designed for Dyna TC88 series and factory electronic ignitions that require low-resistance coils. Not for use with ignitions not engineered for low-resistance coils.

€122.80 €161.72

-€38.91

DYNATEK-HARLEY Dual-Output Coil — 12V, Black

Reliable dual-output ignition coil engineered for aftermarket and OEM systems; made in the USA.

€151.32 €190.23

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€118.35

TERRY COMPONENTS Starter Motor — 12V, 1.5 kW, Black

Upgraded Nippondenso assembly with reinforced internal components, CNC-machined mounting noses and full dyno testing; made in the USA.

€460.24 €578.59

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

-€26.57

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€58.40 €84.97

-€38.16

TEXA Interface Cable — Black

Reliable interface cable for connecting diagnostic tools to vehicle systems. Flexible jacket and reinforced strain relief for long service life.

€107.95 €146.11

-€44.58

TEXA Interface Cable — Black

Durable interface lead with flexible jacket and precision connectors for reliable diagnostic connections.

€126.14 €170.72

Electrical & Ignition

Contact us

Products

Our company