The 2000I PC Programmable Electronic Ignition Kit is completely self-contained, allowing the entire unit to hide under the cam cover for a clean look on custom bikes. It features single-fire operation down to zero rpm for easier cranking and kicking. This ignition kit will operate in all combinations of single-fire or dual-fire with single-plug or dual-plug heads.
With ten advance curves, it covers a broad range of engine builds and riding styles. It also offers engine over-rev protection, adjustable from 6000 to 7500 rpm, and an adjustable timing retard for nitrous and turbo applications.
The VOES indicator lets you monitor the VOES switch at a glance, and the built-in tach driver can be used to activate shift lights, auto-shifters, and other accessories. Static timing is easy with a built-in timing indicator.
This kit includes intelligent over-current/short-circuit protection, active dwell control, and is over-voltage protected against momentary spikes. Data recording features total engine hours, time wide-open throttle, longest time operating at wide-open throttle, max rpm, seconds near rev limit, and number of engine starts.
PC programmability allows for an eight-point, fully definable wide-open throttle curve and a fully definable part throttle curve. It includes programmable rev limit in 50 rpm steps, programmable dead-cranking revs 0-5, rear cylinder offset, total of +/- 10°, programmable rev limiter, and a security lock out (pin # activated). The programming kit is not necessary to use all selectable functions of the current ignition.
Additionally, a pigtail connector enables the user to connect the ignition to a PC to either download recorded info or program their own power curves, rev limits, dead revs, or rear cylinder off-set timing. This connector remains on the bike.
Made in the U.S.A. and not for fuel-injected models.
English
Español
Delivery policy
Return policy
