Electrical & Ignition

2000I PC Programmable Electronic Ignition Kit — DYNATEK, Dyna 2000 Series, D2KI-1P

-€57.03

DYNATEK-HARLEY 2000I PC Programmable Electronic Ignition Kit — DYNATEK, Dyna...

Self-contained PC-programmable ignition module with single- or dual-fire modes, ten advance curves, adjustable over-rev protection and comprehensive data logging.

€221.77 €278.80

2000I PC Programmable Electronic Ignition Kit — Dyna 2000 Series, Twin

-€98.42

DYNATEK-HARLEY 2000I PC Programmable Electronic Ignition Kit — Dyna 2000...

Self-contained ignition module fits under the cam cover. Single- or dual-fire operation, ten advance curves, PC-programmable. Not for fuel-injected models. Made in the USA.

€382.74 €481.16

Dyna 2000TC Programmable Digital Performance Ignition Module — Black

-€64.08

DYNATEK-HARLEY Dyna 2000TC Programmable Digital Performance Ignition Module —...

Single-fire, fully programmable ignition with 16 advance curves, 8 rev limiter settings, PC programmability, coil-current monitoring and data logging; made in USA.

€249.24 €313.32

2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000 Series, 8-pin, black

-€52.64

DYNATEK-HARLEY 2000-HDE PC-Programmable Digital Ignition Module — Dyna 2000...

PC-programmable microcomputer ignition module with four advance curves and four rev limiter settings (6000–7500 rpm). Separate tach output and diagnostic LED. Not for fuel-injected models.

€204.72 €257.36

-€57.22

DYNATEK-HARLEY Dyna 2000TC-3 Digital Performance Ignition Module — Black

Digital performance unit with 16 advance curves, adjustable rev limiter (5,750–7,500 rpm), and single‑connector installation. Made in the U.S.A.

€222.51 €279.73

-€57.03

DYNATEK-HARLEY Dyna 2000TC-3 Digital Performance Ignition Module — Black

Digital performance ignition module with 16 advance curves and an adjustable rev limiter from 5,750–7,500 rpm.

€221.77 €278.80

Ignition Booster Module — Mechanical (Points), Single-point, Black

-€45.37

DYNATEK Ignition Booster Module — Mechanical (Points), Single-point,...

Converts inconsistent surges into controlled bursts for stronger ignition, reduces current to 0.1 amp to prevent burned points, and delivers a 50% faster spark voltage rise.

€143.17 €188.54

-€38.91

DYNATEK-HARLEY Miniature Series Coil — 12V, 3.0Ω, dual-plug

High-output miniature coil for Dyna 2000/3000 and dwell-control ignitions. Secondary resistance 11.5 ohms. Not for Twin Cam or Dyna "S"/DYNA III and earlier.

€151.32 €190.23

-€38.92

DYNATEK 0.5 Ohm Miniature Coil — 12V, Black, Pair

Designed for Dyna TC88 series and factory electronic ignitions that require low-resistance coils. Not for use with ignitions not engineered for low-resistance coils.

€122.80 €161.72

-€38.91

DYNATEK-HARLEY Dual-Output Coil — 12V, Black

Reliable dual-output ignition coil engineered for aftermarket and OEM systems; made in the USA.

€151.32 €190.23

-€54.11

DYNOJET-HARLEY Ignition Coil Guard — Harley-Davidson, gray

Protects the ignition coil in the event of a tip over
Easy installation

€210.45 €264.56

Spark Plug — Thread reach 19.1 mm (3/4"), thread size 12 mm, hex 16 mm (5/8"), spark gap 0.9 mm, heat range 6

-€3.75

NGK SPARK PLUGS Spark Plug — Thread reach 19.1 mm (3/4"), thread size 12 mm,...

Durable spark plug with trivalent plating, alumina-silicate ceramic insulator, triple seals, corrugated ribs, and a copper core for reliable ignition and heat control.

€4.45 €8.20

Resistor Spark Plug — 19.1 mm reach, 12 mm thread, 16 mm hex, heat range 7

-€5.90

NGK SPARK PLUGS Resistor Spark Plug — 19.1 mm reach, 12 mm thread, 16 mm hex,...

Resistor spark plug with wide heat range to reduce fouling and preignition; high-alumina ceramic, copper core, nickel-alloy tip.

€6.60 €12.50

Champion Spark Plugs — Thread reach 19 mm (3/4"), Thread size 10 mm, Spark gap 0.8 mm (0.031"), Resistor type

-€1.98

CHAMPION Champion Spark Plugs — Thread reach 19 mm (3/4"), Thread size...

Reliable motorcycle spark plugs with copper-core electrode, fine-wire ignitable electrodes, reduced fouling, and SAC-9 resistor for EMI/RFI suppression.

€1.76 €3.74

Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, heat range 8, RA8HC

-€77.91

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, heat...

Copper-core center electrode for precise heat control, SAC-9 resistor for EMI/RFI suppression, Ultraseal™ shell for rust prevention; made in the USA.

€69.69 €147.60

-€6.54

CHAMPION S-Plug —

Reliable spark plug designed for improved performance, fuel economy and durability.

€5.84 €12.38

Champion Spark Plugs — Resistor type, projected center electrode, platinum tip

-€2.86

CHAMPION Champion Spark Plugs — Resistor type, projected center...

Reliable motorcycle spark plugs with a copper core center electrode, fine-wire electrodes, reduced fouling, and SAC-9 resistor for EMI/RFI suppression.

€2.56 €5.42

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Electrical & Ignition

Contact us

Products

Our company