Electrical & Ignition

-€143.19

DAYTONA TWIN TEC LLC External Ignition Conversion Kit — Black

Replaces heat-sensitive internal nose-cone ignitions with an external 1007EX module; includes harness, sensors, hardware, and instructions.

€556.88 €700.07

USB Interface for Ignition and Fuel Injection Systems — Programming Kit

-€26.54

DAYTONA TWIN TEC LLC USB Interface for Ignition and Fuel Injection Systems —...

USB interface and programming kit for ignition and fuel‑injection systems. Includes ignition module, single‑fire coil, 8.5mm spark plug wires and instructions. Features adjustable advance curves, selectable single/dual‑fire, digital rpm limit, multi‑spark mode and coil short‑circuit protection.

€103.19 €129.73

-€3.11

DAYTONA TWIN TEC LLC Timing Rotor — Natural

Precision timing component that supports accurate spark timing and reduced vibration. Includes mounting screw and washer.

€12.09 €15.20

-€89.77

DAYTONA TWIN TEC LLC Internal Ignition System — Black, Gray, 3.0 Ω

Programmable internal ignition system with adjustable advance curves, multi‑spark mode, rotary timing controls and coil short‑circuit protection.

€349.14 €438.91

-€114.55

DAYTONA TWIN TEC LLC Internal Ignition Kit — Black, Standard

Programmable internal ignition kit with adjustable advance curves, selectable single/dual-fire modes, digital rpm limiter, 8.5mm spark plug wires and single-fire coil. Made in the U.S.A.

€445.45 €560.00

VT-i Electronic Ignition System — Chrome, Kit

-€58.38

DAYTONA TWIN TEC LLC VT-i Electronic Ignition System — Chrome, Kit

Dual-fire electronic ignition with precise digital rpm limiter and LED status indicator. Fully encapsulated, waterproof, vibration-resistant, and rated to 260°F (125°C). Not for fuel-injected models; for use with mechanical advance systems.

€227.02 €285.40

-€26.09

DAYTONA TWIN TEC LLC Single-Fire Coil — 12V, 3.0 ohm, Black

High-output single-fire ignition coil. Compatible with most aftermarket single-fire ignitions. 2.5" o.c. mounting holes for easy fitment.

€101.48 €127.57

High-Output Ignition Coil — 12V input, 45,000V output, Black, single-fire

-€26.54

DAYTONA TWIN TEC LLC High-Output Ignition Coil — 12V input, 45,000V output, Black,...

Reliable high-output ignition coil for OEM and aftermarket applications.

€103.19 €129.73

Champion Spark Plugs — Thread reach 19 mm (3/4"), Thread size 10 mm, Spark gap 0.8 mm (0.031"), Resistor type

-€1.98

CHAMPION Champion Spark Plugs — Thread reach 19 mm (3/4"), Thread size...

Reliable motorcycle spark plugs with copper-core electrode, fine-wire ignitable electrodes, reduced fouling, and SAC-9 resistor for EMI/RFI suppression.

€1.76 €3.74

Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, heat range 8, RA8HC

-€77.91

CHAMPION Copper Plus™ Spark Plug — 14 mm thread, 19.1 mm reach, heat...

Copper-core center electrode for precise heat control, SAC-9 resistor for EMI/RFI suppression, Ultraseal™ shell for rust prevention; made in the USA.

€69.69 €147.60

-€6.54

CHAMPION S-Plug —

Reliable spark plug designed for improved performance, fuel economy and durability.

€5.84 €12.38

Champion Spark Plugs — Resistor type, projected center electrode, platinum tip

-€2.86

CHAMPION Champion Spark Plugs — Resistor type, projected center...

Reliable motorcycle spark plugs with a copper core center electrode, fine-wire electrodes, reduced fouling, and SAC-9 resistor for EMI/RFI suppression.

€2.56 €5.42

-€7.36

PINGEL Tether Cord with Wristband — Black

Secure tether cord with adjustable wristband for keys and small tools. Made in the USA.

€28.63 €35.99

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€9.85

COMP CAMS Fast Start Boost Relay — 12V

Delivers full battery voltage to single-fire coil during cranking. Sealed 30 A unit with high-temp housing. Compact 1.5" x 1" x 1" with mounting flange.

€27.89 €37.74

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

-€4.76

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€10.45 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

-€29.10

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€64.01 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

-€32.02

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€70.38 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

-€42.47

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€93.38 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

-€62.54

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€137.51 €200.05

$Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black$

-€20.21

DEI Hi-Temp Shrink Tubes — 3.2 mm (1/8\"), 15.2 m (50'), Black

Professional-grade polyolefin shrink tubing with 3:1 ratio for wire insulation, strain relief and a water-tight seal across a wide temperature range.

€44.38 €64.59

Electrical & Ignition

Contact us

Products

Our company