S&S CYCLE (33)

-€112.20
Out of Stock

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

-€3.54
Out of Stock

S&S CYCLE Wrist Pin Circlips — 0.927 in, 4-pack

Precision circlips for 0.927 in wristpins. Made in the U.S.A.

€8.26 €11.80

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — for 74" and 80" engines

OEM-spec hydraulic replacement camshaft; H-grind reproduction of '48–'84 Big Twin stock cams. Ideal for repair and restoration of 74" and 80" engines.

€222.75 €280.03

-€6.54
Out of Stock

S&S CYCLE Shift Lever Adjustment Screw — Shift lever, Black/Red, 56-1002

Precision adjustment screw for smooth, reliable shifting on Harley-Davidson® Big Twin 5-speed transmission models. OE or better quality.

€25.37 €31.91

H-Grind Camshaft — fits 74" and 80" engines, generator and alternator fit

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — fits 74" and 80" engines, generator and...

OEM-spec hydraulic camshaft reproducing stock '48–'84 Big Twin cams; ideal for repair and restoration of 74" and 80" engines. Available for generator and alternator engines.

€222.75 €280.03

Super Stock™ Stealth Air Cleaner Kit — Black, fits S&S 66 mm Throttle Hog

-€40.42
Out of Stock

S&S CYCLE Super Stock™ Stealth Air Cleaner Kit — Black, fits S&S 66 mm...

High-flow air cleaner kit with a built-in stinger cone; includes backing plate, filter, and hardware. Made in the USA.

€157.18 €197.60

-€51.63
Out of Stock

S&S CYCLE H-Grind Camshaft — H grind, for 74" and 80" Big Twin engines

OEM-spec hydraulic camshaft reproducing stock cams used in '48–'84 Big Twins; ideal for repair and restoration of 74" and 80" engines.

€200.80 €252.43

583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583", Exhaust 262°/0.583", Gear drive

-€213.10
Out of Stock

S&S CYCLE 583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583",...

Reverses rear cam rotation to increase cam lift capability and valve timing accuracy. Includes gears, bearings, gasket and instructions. Professional installation required.

€828.74 €1,041.84

-€112.20
Out of Stock

S&S CYCLE MR103 Easy Start Camshaft Kit — S&S Cycle, Chain

Bolt-in camshaft kit for 103" engines that eases starting by temporarily reducing compression, then returns to full compression. Improves midrange power (best 2500–5500 rpm). Includes camshafts and all necessary gaskets, bearings and hardware. Installer must verify coil bind and clearances.

€436.38 €548.58

-€86.79
Out of Stock

S&S CYCLE 635 H.O. Chain Drive Camshaft Kit — Grind 635HO, Raw finish

High lift camshaft kit for modified engines 106"+; not a bolt-in kit. Includes camshafts and hardware; installer must verify clearances.

€337.57 €424.36

Replacement Ring Set for S&S Pistons — 3.500" bore, standard piston size

-€14.56
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.500" bore, standard...

Replacement ring set for S&S pistons. Includes rings for two pistons. Made in the USA.

€56.59 €71.15

-€13.43
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — +0.020", 3.500"

Replacement ring set for S&S pistons. Sold as a set for two pistons. Made in the USA.

€52.24 €65.67

Replacement Ring Set for S&S Pistons — 3.4375 in bore, Standard piston size

-€14.56
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.4375 in bore,...

Replacement ring sets for S&S pistons sold as matched sets for two pistons. Made in the USA.

€56.59 €71.15

Replacement Ring Set for S&S Pistons — Bore 3.4375", Piston +0.060"

-€14.56
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.4375", Piston...

Replacement ring set for two S&S pistons. Made in the USA.

€56.59 €71.15

Replacement Ring Set for S&S Pistons — +0.090" piston, 3.4375" bore

-€14.81
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — +0.090" piston, 3.4375"...

Replacement ring set for S&S pistons. Includes rings for two pistons. Made in the USA.

€57.68 €72.49

-€14.56
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.625" bore, Set

Replacement ring sets for S&S pistons. Sold as sets for two pistons. Made in the USA.

€56.59 €71.15

-€19.39
Out of Stock

S&S CYCLE Transmission Countershaft Bearing — S&S CYCLE, PN 56-3031

High-quality transmission countershaft bearing, made in the USA for reliable performance.

€54.77 €74.16

Replacement Ring Set for S&S Pistons — Bore 3.625", Piston +0.010"

-€14.56
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.625", Piston...

Replacement ring set for S&S pistons; includes rings for two pistons. Made in the USA.

€56.59 €71.15

$Throttle Hog Cable Operated Throttle Body Kit — 58 mm (2.28\") bore, black powder coat$

-€194.01
Out of Stock

S&S CYCLE Throttle Hog Cable Operated Throttle Body Kit — 58 mm (2.28\")...

One-piece cable-operated throttle body and manifold that improves airflow and fits with stock sensors and throttle cables. Includes hardened flanges and seals and a durable powder-coat finish. Made in the USA.

€754.45 €948.46

Replacement Ring Set for S&S Pistons — 4.125" bore, +0.020" oversize

-€19.40
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — 4.125" bore, +0.020"...

Replacement ring set for S&S pistons. Sold as a set for two pistons. Made in the USA.

€75.48 €94.88

-€194.01
Out of Stock

S&S CYCLE Throttle Hog Cable Operated Throttle Body Kit — 58 mm bore, Black

Cable-operated throttle body kit that boosts airflow, preserves a stock look, and installs with stock sensors and fuel hardware; Stealth air cleaners sold separately.

€754.45 €948.46

-€19.40
Out of Stock

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 4.125", +0.010"

Replacement ring set for S&S pistons. Includes rings for two pistons. Made in the USA.

€75.48 €94.88

Throttle Hog Cable Operated Throttle Body Kit — 58 mm bore, manifold 408, black powder coat

-€196.26
Out of Stock

S&S CYCLE Throttle Hog Cable Operated Throttle Body Kit — 58 mm bore,...

One-piece throttle body/manifold for easy installation and a factory look. Sealed stainless throttle shaft with dual roller bearings for smooth operation. Includes hardened steel flanges and seals. Made in the USA.

€763.24 €959.50

Throttle Hog Cable Operated Throttle Body Kit — 66 mm bore, black powder coat

-€194.01
Out of Stock

S&S CYCLE Throttle Hog Cable Operated Throttle Body Kit — 66 mm bore,...

Cable-operated throttle body kit with sealed stainless shaft, one-piece manifold, compatible with stock sensors and cables; includes hardened flanges and seals. Made in the USA.

€754.45 €948.46

Throttle Hog Cable Operated Throttle Body Kit — 58 mm bore, Black powder coat

-€196.26
Out of Stock

S&S CYCLE Throttle Hog Cable Operated Throttle Body Kit — 58 mm bore,...

Cable-operated Throttle Hog throttle body kit with one-piece manifold, sealed stainless steel shaft with dual roller bearings, black powder coat finish. Made in USA.

€763.24 €959.50

Throttle Hog Cable Operated Throttle Body Kit — 58 mm, manifold 398, black powder coat

-€207.55
Out of Stock

S&S CYCLE Throttle Hog Cable Operated Throttle Body Kit — 58 mm,...

Cable-operated Throttle Hog throttle body kit with one-piece design, sealed stainless steel shaft, hardened flanges and seals; requires Stealth air cleaners (sold separately).

€807.10 €1,014.65

-€93.94
Out of Stock

S&S CYCLE HP103 Camshaft Kit — 249°/251° duration, 0.575" lift

Bolt-in cam kit for 103" engines; strong midrange power (3,000–6,000 rpm). Requires high-lift valve springs. Made in USA.

€365.33 €459.27

-€181.56
Out of Stock

S&S CYCLE Throttle Hog Cable Operated Throttle Body Kit — 66 mm bore,...

Cable-operated throttle body kit that increases airflow, features a one-piece throttle body/manifold, seals to prevent air leaks, and installs using stock sensors and throttle cables.

€707.49 €889.05

MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1 compression

-€240.61
Out of Stock

S&S CYCLE MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1...

Bolt-in MR103 camshaft kit for 103" engines (9.7:1–10.5:1). Easier starting, full compression at speed. Includes hardware and instructions.

€935.67 €1,176.28

-€314.51
Out of Stock

S&S CYCLE MR103 Cam Kit — Intake 226°, Exhaust 252°

Bolt-in camshaft kit for 103" engines. Increases power across the rpm range, with best results from 2500–5500 rpm. Made in the USA.

€888.84 €1,203.35

shop by category

Home

List of products by brand S&S CYCLE

Contact us

Products

Our company

shop by category

Home  

List of products by brand S&S CYCLE

Home