Handlebars & Controls (7)

1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 77.5 cm (30-1/2") width, 15 cm rise, Black

-€58.46

BILTWELL 1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 77.5 cm (30-1/2")...

Removable injection-molded plug for TBW compatibility, 4130 chromoly construction, mandrel-bent tubing, milled slots for internal routing, notched right-side end for Harley Throttle-By-Wire control module.

€165.22 €223.68

1" Handlebar w/ TBW Plugs — 25.4 mm clamp (1"), 30-1/2" width, 6" rise

-€63.79

BILTWELL 1" Handlebar w/ TBW Plugs — 25.4 mm clamp (1"), 30-1/2" width,...

Injection-molded bar-end plug removes for TBW compatibility; mandrel-bent tubing, milled slots for internal routing, notched right end accepts TBW module, precision mitered TIG welds.

€180.30 €244.09

1" Handlebar w/ TBW Plugs — 30-1/2" width, 1" clamp, 3-1/4" rise, Chrome

-€47.77

BILTWELL 1" Handlebar w/ TBW Plugs — 30-1/2" width, 1" clamp, 3-1/4"...

Injection-molded plug for TBW compatibility, 0.120" chromoly construction, mandrel-bent tubing, milled slots for internal routing, and TIG-welded joints.

€135.01 €182.78

1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise, Black

-€42.43

BILTWELL 1" Handlebar w/ TBW Plugs — 30" width, 1" clamp, 4-1/2" rise,...

Durable 4130 chromoly handlebar with TBW-ready bar end plug and clean internal wire routing.

€119.91 €162.34

1" Handlebar w/ TBW Plugs — 27-1/4", 1", Chrome

-€47.77

BILTWELL 1" Handlebar w/ TBW Plugs — 27-1/4", 1", Chrome

Injection-molded TBW-compatible plug, mandrel-bent tubing, milled slots for internal wiring, and TIG-welded joints for durability.

€135.01 €182.78

1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 78.5 cm width, Black

-€58.46

BILTWELL 1" Handlebar w/ TBW Plugs — 25.4 mm clamp, 78.5 cm width, Black

Moto-style handlebar with removable bar-end plug for TBW compatibility and milled slots for internal wiring.

€165.22 €223.68

1" Handlebar w/ TBW Plugs — 1" clamp, 31" width, 4-1/4" rise, Chrome

-€63.79

BILTWELL 1" Handlebar w/ TBW Plugs — 1" clamp, 31" width, 4-1/4" rise,...

Removable nylon plug provides TBW compatibility; milled slots allow clean internal wiring and precise ergonomics.

€180.30 €244.09

V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise, 80 cm (31-1/2") width, Silver

-€30.08

ODI V-Twin MOTO Handlebar — 28.6 mm (1-1/8") diameter, 82 mm rise,...

7075-T6 alloy construction for strength and lightness.

Shot-peened, hard anodized finish; slotted and TBW-notched for clean wiring.

Laser-etched graphics and knurled clutch side for improved grip.

€85.00 €115.08

-€34.01

ODI V-Twin MOTO Handlebar — 28.6 mm clamping diameter, 80 cm width

7075-T6 construction, slotted for internal wiring, notched for throttle-by-wire, knurled left side for improved grip.

€96.10 €130.11

V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise, 76 cm (30") width, Black

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm (1-1/8") clamp, 70 mm rise,...

Lightweight 7075-T6 alloy tracker handlebar, shot-peened and hard anodized black, slotted for internal wiring, notched for throttle-by-wire, knurled left side, laser-etched ODI graphics, made in the U.S.A.

€85.00 €115.08

V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm rise, Silver anodized

-€30.08

ODI V-Twin Tracker Handlebar — 28.6 mm clamp, 30" width, 70 mm...

High-strength 7075-T6 alloy Tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring and notched for TBW.

€85.00 €115.08

V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2") width, 82 mm rise, anodized silver

-€30.08

ODI V-Twin MOTO Handlebar — 25.4 mm (1") diameter, 80 cm (31-1/2")...

7075-T6 alloy moto handlebar with hard-anodized finish, slotted for internal wiring and notched for throttle-by-wire.

€85.00 €115.08

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76 cm (30") width

-€34.93

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 70 mm rise, 76...

7075-T6 alloy tracker handlebar with shot-peened, hard-anodized finish; slotted for internal wiring, notched for TBW, laser-etched ODI graphics, knurled left side for improved grip; made in the U.S.A.

€98.73 €133.66

V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm) width, 70 mm rise

-€30.08

ODI V-Twin Tracker Handlebar — 25.4 mm (1") clamp, 30" (76 cm)...

Tracker-style handlebar with internal wiring slots, TBW notches, knurled clutch end, and laser-etched ODI graphics. Made in the U.S.A.

€85.00 €115.08

-€23.51

BILTWELL Utility Mirror Round Short Arm — Short arm, Black

Round short-arm mirror with die-cast aluminum construction, stainless-steel pivot, wide-angle tempered glass, and switchable bezel mounting for left or right installation.

€66.44 €89.95

-€57.93

BILTWELL Utility Mirror Round Short Arm — Black

Round short-arm utility mirror with long perch, stainless-steel pivot, wide-angle tempered glass, and switchable bezel hardware.

€62.02 €119.95

-€47.77

BILTWELL Utility Mirror Round Short Arm — Black

Die-cast aluminum round mirror with long perch, stainless-steel ball pivot, wide-angle tempered glass; convertible bezel mounting; available in round and teardrop shapes.

€135.01 €182.78

-€52.26

BILTWELL Utility Mirror Round Short Arm — Chrome, Pair

Injection die-cast aluminum bezel and perch for lightness and durability
Long perch for an unobstructed view over the rider's shoulder
Stainless-steel ball pivot and mounting hardware
Large wide-angle tempered glass for road and highway use
Swap hardware for left- or right-hand bar end installation on select styles

€147.69 €199.95

$1\" Handlebar — 1\" clamp, 69 cm (27.25\") width, Chrome$

-€38.62
Out of Stock

BILTWELL 1\" Handlebar — 1\" clamp, 69 cm (27.25\") width, Chrome

Seamless 4130 chromoly handlebar with CNC mandrel bends and TIG-welded joints. For aftermarket/custom applications; not notched for TBW.

€64.35 €102.97

$1\" T-Bar — 30\" width, 8\" rise, 1\" diameter, black gloss$

-€85.76

BILTWELL 1\" T-Bar — 30\" width, 8\" rise, 1\" diameter, black gloss

Precision-mitered, TIG-welded T-bar with mandrel-bent tubing for smooth bends and reliable fit.

€142.89 €228.65

-€91.33

BILTWELL 1" T-Bar — 1" diameter, 8" rise, 30" width, Chrome

4130 chromoly construction with mandrel-bent curves and precision TIG-welded joints for reliable performance.

€152.15 €243.48

1" T-Bar — 30" width, 10" rise, 1" diameter

-€102.46

BILTWELL 1" T-Bar — 30" width, 10" rise, 1" diameter

Precision-mandrel bent chromoly T-bar with TIG-welded, precision-mitered joints for smooth bends and durable performance.

€170.69 €273.15

Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit — Chrome

-€22.87

ALLOY ART Gooden Tight™ Springer Handlebar Riser Stud Bushing Kit — Chrome

Includes poly bushings, riser studs, mounting bolts and billet inserts. Made in the USA. Easy drop-in installation.

€64.64 €87.51

1-3/4" Slimline Handlebar Risers — Rise 44.5 mm, Clamp 25.4 mm, Polished

-€39.91

BILTWELL 1-3/4" Slimline Handlebar Risers — Rise 44.5 mm, Clamp 25.4...

Slimline risers featuring investment-cast stainless steel construction. Fit 1" bars, accept stock 1/2" x 13 mounting hardware, and include 5/16"-18 stainless Allen clamp screws.

€112.80 €152.71

-€1.03
Out of Stock

EASTERN MOTORCYCLE PARTS Throttle Screw Retaining Rings — 10 Pack, Raw, Steel

High-quality OEM replacement retaining rings for throttle screws.

€2.87 €3.90

1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 1" (25.4 mm) handlebar, Polished

Cast aluminum clamshell and throttle tube with chrome-plated ferrules and hardware; fits stock H‑D thread-in and clip-in cables.

€76.55 €103.63

-€27.08

BILTWELL 1" Whiskey Throttle Assembly — 25.4 mm (1") handlebar, black

Cast aluminum clamshell throttle assembly with chrome-plated ferrules and plated Allen hardware; accepts rubber grips and fits stock H-D cables.

€76.55 €103.63

-€16.03

BILTWELL Whiskey Throttle Tube — 25.4 mm (1") handlebar diameter, Black

CNC-machined 6061-T6 aluminum throttle tube that lets you fit softer aftermarket grips and routes two cables through a machined channel.

€45.31 €61.34

-€73.84

TRASK Assault Handlebar Risers — Rise 6" (15 cm), 1" clamp, Matte black

Billet aluminum risers with carbon-fiber cover plates. Keeps wiring hidden and accepts 1/2"-13 bolts. Made in the USA.

€287.15 €360.99

-€47.77
Out of Stock

BILTWELL [object Object]

1" OD, .120" (3 mm) wall seamless 4130 chromoly handlebar — mandrel-bent on a CNC bender and TIG-welded. For aftermarket/custom applications. Not notched for TBW.

€135.01 €182.78

shop by category

Handlebars & Controls

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Contact us

Products

Our company

shop by category

Handlebars & Controls  

Subcategories

Handlebars

Risers

Wiring

Grips

Hand & Foot Controls

Handlebars & Controls