Engine

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

-€84.67

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, gear drive

The High Flow Camplate increases oil flow and cooling, is pressure tested with a 55-60 psi relief setting, includes bearing and retainer plate hardware, and is for use with Feuling® oil pumps only.

€329.27 €413.94

-€60.02

TRASK Mystfree Kit — Crankcase breather valve, Aluminum

Improves oil drainage to the rocker; reduces oil misting from engine breathers; machined T-6061 billet construction; made in the U.S.A.

€233.41 €293.43

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam A Engines

Precision ground press-on races; includes right and left crankshaft races with left side thrust washers. Made in the USA.

€72.06 €90.59

Crankshaft Bearing Race Kit — Twin Cam B engines

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam B engines

Precision press-on races for true outer diameter after installation.
Includes right and left crankshaft races and left-side thrust washers.
Made in the USA.

€72.06 €90.59

-€16.34

FEULING OIL PUMP CORP. Undersize Crankshaft Bearing Race Kit — 5206

Press-on undersize crankshaft bearing races for right and left sides, includes left-side thrust washers; enables repair and remachining after race spinning. Made in USA.

€63.57 €79.91

-€11.77

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft

Single-row deep groove outer bearings built for demanding applications. Kit includes a front ball bearing and a rear roller bearing with race. Made in the USA.

€45.77 €57.54

Inner Camshaft Needle Roller Bearings — Camshaft

-€6.95

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — Camshaft

Heavy-duty inner camshaft needle roller bearings for performance engines. Manufactured by Koyo® Torrington® and made in the USA.

€27.05 €34.00

Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N 2077, pair

-€9.29

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N...

Heavy-duty full-complement needle bearings for camshafts. Manufactured by Koyo Torrington. Made in the USA.

€36.15 €45.44

-€16.94

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft, Kit

Includes one front ball bearing and one rear roller bearing with race for camshaft applications. Manufactured by Timken® Fafnir® and Koyo® Torrington®. Made in the USA.

€65.86 €82.80

-€181.90

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — Red

High-volume pump increases oil pressure and flow, reduces temperatures and wet sumping; bench-tested relief valve and proven performance gains on M-Eight.

€707.36 €889.26

-€204.97

FEULING OIL PUMP CORP. Race Series Oil Pump/Camplate Kit — Red

High-performance oil pump and camplate kit that increases oil pressure and flow, reduces temperatures, and corrects common factory scavenge issues for M-Eight engines.

€797.13 €1,002.10

Endurance Beehive® Valve Springs with Titanium Retainers — 0.650" spring lift, fits 05-17 Twin Cam

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers —...

Endurance Beehive® valve spring kit with titanium retainers; direct bolt-in up to .574" (84–04 Big Twin, 86–03 XL) and up to .650" (05–17 Twin Cam).

€295.24 €371.16

Endurance Beehive® Valve Springs with Titanium Retainers — 0.650" spring lift, 7.00 mm stem diameter

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers —...

Premium Endurance Beehive® valve spring kit with lightweight titanium retainers, machined seats, shims, locks and Viton® seals. Direct bolt-in replacement for many V-Twin applications.

€295.24 €371.16

Viton® Valve Guide Seals — 5/16" stem diameter, 4 Pack

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16" stem diameter, 4 Pack

High-quality Viton® valve guide seals designed for high engine temperatures with a spring-loaded wiper to reduce excess oil on valve stems. Made in the USA.

€11.49 €14.44

$Viton® Valve Guide Seals — 5/16\", 4 pack$

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16\", 4 pack

High-quality seals designed to handle high engine temperatures with a spring-loaded wiper that removes excess oil from the valve stem with minimal friction. Made in the USA.

€11.49 €14.44

-€6.99

FEULING OIL PUMP CORP. Valve Locks — 7.00 mm, Steel, set of 8

Raises valve spring retainer to gain 0.050" installed height without machining the cylinder head spring set. Made in the USA.

€27.18 €34.17

Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads — 0.650" lift, 7.056 mm stem

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads —...

High-performance Beehive valve spring kit for Screamin' Eagle Heads that reduces valve-train noise, prevents spring separation, and installs as a direct bolt-in replacement.

€295.24 €371.16

-€50.73

FEULING OIL PUMP CORP. Beehive® Valve Spring Kit — 0.3125" stem, Econo Beehive

Premium conical ovate wire beehive springs with lightweight retainers; complete kit with seats, shims, locks and Viton® seals. Direct replacement for many Big Twin and XL cams up to 0.574"/.585" lift.

€197.31 €248.04

-€81.03

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — 0.750" lift

High-load Beehive® valve spring kit for high-lift cams; includes lightweight titanium retainers, chromoly seats, seat shims and premium Viton® seals. Up to 0.750" lift. Made in the USA.

€315.11 €396.14

-€155.08

COMP CAMS Beehive Valve Spring Kit

The Beehive Valve Spring Kit is a performance upgrade designed for Harley V-Twin engines, offering enhanced rpm capability and compatibility with high-lift cams.

€319.56 €474.64

-€45.34

FEULING OIL PUMP CORP. Titanium Valve Spring Retainer Kit — 8-pack, -0.050"

High-performance valve spring retainers engineered for M8 models. Made in the USA; recommended installation by a qualified technician.

€176.36 €221.70

-€46.73

FEULING OIL PUMP CORP. Titanium Valve Spring Retainer Kit — 8-pack, +0.050"

Precision titanium valve spring retainer kit for M8 models; made in the USA.

€181.78 €228.51

-€41.47

FEULING OIL PUMP CORP. Gorilla Rocker Shafts — Set of 4, 4140 steel

Gas-nitrided and surface-treated shafts offering over twice the strength of factory components. Recommended for Twin Cam engines and high-lift cam applications. Made in the U.S.A.

€161.30 €202.77

Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140 steel, P/N 1236

-€65.39

FEULING OIL PUMP CORP. Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140...

Gas-nitrided shafts with final surface treatment. Kit includes shafts and ARP bolts. Recommended for Twin Cam engines with higher-lift cams and heavier valve spring pressures.

€254.27 €319.66

Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140 Steel, P/N 1237

-€62.92

FEULING OIL PUMP CORP. Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140...

Gas‑nitrided rocker shafts with ARP bolts. Recommended for Twin Cam engines and higher‑lift camshaft applications.

€244.67 €307.59

-€54.99

FEULING OIL PUMP CORP. Fast Install® Adjustable Pushrods — 7/16", 0.095", 4-Pack

Fast-install adjustable pushrods made from chromoly steel; come disassembled for easy installation, compatible with factory pushrod tubes, and use separate intake/exhaust lengths to minimize adjustment.

€213.85 €268.84

HP+ One Piece Pushrods — Fixed length, set of 4

-€36.52

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — Fixed length, set of 4

Fixed-length 4130 chromoly one-piece pushrods with swedged formed ends; 7/16" diameter, 0.165" wall; heat-treated with black oxide finish; stock replacement lengths; compatible with stock, Screamin' Eagle and Feuling camshafts.

€142.01 €178.53

-€36.52

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — Fixed length, set of 4

One-piece chromoly pushrods with swedged ends; 7/16" diameter, 0.165" wall; heat-treated with black oxide; stock replacement lengths.

€142.01 €178.53

HP+® and Race Series® Adjustable Pushrods — 3/8" diameter, 0.145" wall, set of 4

-€50.33

FEULING OIL PUMP CORP. HP+® and Race Series® Adjustable Pushrods — 3/8" diameter,...

Maintains maximum valve lift and column rigidity; minimal adjustment; double jam nut lock; compatible with hydraulic and solid lifters; made in U.S.A.

€195.73 €246.06

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine