Engine

Tornado Turbo Performance Kit — Black, TRASK

-€1,595.33

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 €7,799.40

-€84.67

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, gear drive

The High Flow Camplate increases oil flow and cooling, is pressure tested with a 55-60 psi relief setting, includes bearing and retainer plate hardware, and is for use with Feuling® oil pumps only.

€329.27 €413.94

-€60.02

TRASK Mystfree Kit — Crankcase breather valve, 6061 T6 aluminum

Improves crankcase ventilation; helps oil drain into the rocker and reduces breather misting. Precision-machined billet aluminum; simple bolt-on installation.

€233.41 €293.43

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam A Engines

Precision ground press-on races; includes right and left crankshaft races with left side thrust washers. Made in the USA.

€72.06 €90.59

Crankshaft Bearing Race Kit — Twin Cam B engines

-€18.53

FEULING OIL PUMP CORP. Crankshaft Bearing Race Kit — Twin Cam B engines

Precision press-on races for true outer diameter after installation.
Includes right and left crankshaft races and left-side thrust washers.
Made in the USA.

€72.06 €90.59

-€16.34

FEULING OIL PUMP CORP. Undersize Crankshaft Bearing Race Kit — 5206

Press-on undersize crankshaft bearing races for right and left sides, includes left-side thrust washers; enables repair and remachining after race spinning. Made in USA.

€63.57 €79.91

-€11.77

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft

Single-row deep groove outer bearings built for demanding applications. Kit includes a front ball bearing and a rear roller bearing with race. Made in the USA.

€45.77 €57.54

Inner Camshaft Needle Roller Bearings — Camshaft

-€6.95

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — Camshaft

Heavy-duty inner camshaft needle roller bearings for performance engines. Manufactured by Koyo® Torrington® and made in the USA.

€27.05 €34.00

Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N 2077, pair

-€9.29

FEULING OIL PUMP CORP. Inner Camshaft Needle Roller Bearings — FEULING PARTS P/N...

Heavy-duty full-complement needle bearings for camshafts. Manufactured by Koyo Torrington. Made in the USA.

€36.15 €45.44

-€16.94

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft, Kit

Includes one front ball bearing and one rear roller bearing with race for camshaft applications. Manufactured by Timken® Fafnir® and Koyo® Torrington®. Made in the USA.

€65.86 €82.80

-€181.90

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — Red

High-volume pump increases oil pressure and flow, reduces temperatures and wet sumping; bench-tested relief valve and proven performance gains on M-Eight.

€707.36 €889.26

-€204.97

FEULING OIL PUMP CORP. Race Series Oil Pump/Camplate Kit — Red

High-performance oil pump and camplate kit that increases oil pressure and flow, reduces temperatures, and corrects common factory scavenge issues for M-Eight engines.

€797.13 €1,002.10

Endurance Beehive® Valve Springs with Titanium Retainers — up to 0.650" lift, 375 lb @ 1.150" open height

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers — up...

Direct bolt-in valve spring kit up to 0.650" lift; includes titanium retainers, machined seats, shims, locks and Viton® seals. Made in the USA.

€295.24 €371.16

Endurance Beehive® Valve Springs with Titanium Retainers — up to 0.650" lift, Chrome-Silicon, Titanium retainers, Kit

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers — up...

Hi-tensile chrome-silicon Beehive valve springs with lightweight titanium retainers; direct bolt-in replacement up to 0.650" cam lift; includes seals and hardware.

€295.24 €371.16

Viton® Valve Guide Seals — 5/16" stem, 4-pack

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16" stem, 4-pack

High-quality Viton® seals for valve guides with a spring-loaded wiper that minimizes oil carryover. Made in the USA.

€11.49 €14.44

$Viton® Valve Guide Seals — 5/16\", 4 pack$

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16\", 4 pack

High-quality seals designed to handle high engine temperatures with a spring-loaded wiper that removes excess oil from the valve stem with minimal friction. Made in the USA.

€11.49 €14.44

-€6.99

FEULING OIL PUMP CORP. Valve Locks — 8-pack, triple-groove, steel

Secures valve retainers to valve stems; precision machined and made in the USA.

€27.18 €34.17

Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads — 0.650" spring lift, Titanium collar, NexTex finish

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads —...

Direct bolt-in Beehive valve spring kit for Screamin' Eagle heads; supports up to 0.650" cam lift.

€295.24 €371.16

-€50.73

FEULING OIL PUMP CORP. Beehive® Valve Spring Kit — 0.3125" stem, Econo Beehive

Premium conical ovate wire beehive springs with lightweight retainers; complete kit with seats, shims, locks and Viton® seals. Direct replacement for many Big Twin and XL cams up to 0.574"/.585" lift.

€197.31 €248.04

High Load Beehive® Valve Springs — up to 0.750" lift, 415 lb at 1.215" open

-€81.03

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — up to 0.750" lift, 415 lb...

Race-proven Beehive® valve spring kit for high-lift cams, offering high fatigue life and precise valve control; includes retainers, seats, shims, locks and premium seals.

€315.11 €396.14

Titanium Valve Spring Retainer Kit — 8 pack, valve seat height 0.050"

-€45.34

FEULING OIL PUMP CORP. Titanium Valve Spring Retainer Kit — 8 pack, valve seat height...

High-performance valve spring retainers engineered for M8 engines. Made in the USA.

€176.36 €221.70

Titanium Valve Spring Retainer Kit — 8 Pack, for M8 models, +0.050"

-€46.73

FEULING OIL PUMP CORP. Titanium Valve Spring Retainer Kit — 8 Pack, for M8 models,...

Precision-machined for consistent performance.
Made in the USA.
Compatible with M8 models.

€181.78 €228.51

-€41.47

FEULING OIL PUMP CORP. Gorilla Rocker Shafts — Set of 4, 4140 steel

Gas-nitrided and surface-treated shafts offering over twice the strength of factory components. Recommended for Twin Cam engines and high-lift cam applications. Made in the U.S.A.

€161.30 €202.77

Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140 steel, P/N 1236

-€65.39

FEULING OIL PUMP CORP. Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140...

Gas-nitrided shafts with final surface treatment. Kit includes shafts and ARP bolts. Recommended for Twin Cam engines with higher-lift cams and heavier valve spring pressures.

€254.27 €319.66

Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140 Steel, P/N 1237

-€62.92

FEULING OIL PUMP CORP. Gorilla Rocker Shafts and Bolt Kit — FEULING PARTS, 4140...

Gas‑nitrided rocker shafts with ARP bolts. Recommended for Twin Cam engines and higher‑lift camshaft applications.

€244.67 €307.59

Fast Install® Adjustable Pushrods — 7/16" diameter, 0.095" wall, 4 pack

-€54.99

FEULING OIL PUMP CORP. Fast Install® Adjustable Pushrods — 7/16" diameter, 0.095"...

Quick-install adjustable pushrods delivered disassembled for top-side installation; feature dual-jam nut locking and a pushrod tube holder, use separate intake/exhaust lengths for maximum rigidity, made in the U.S.A., fits factory tubes.

€213.85 €268.84

HP+ One Piece Pushrods — Fixed length, set of 4

-€36.52

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — Fixed length, set of 4

Fixed-length 4130 chromoly one-piece pushrods with swedged formed ends; 7/16" diameter, 0.165" wall; heat-treated with black oxide finish; stock replacement lengths; compatible with stock, Screamin' Eagle and Feuling camshafts.

€142.01 €178.53

-€36.52

FEULING OIL PUMP CORP. HP+ One Piece Pushrods — 7/16" diameter, 0.165" wall, Black Oxide

One-piece, fixed-length pushrod set recommended to reduce valvetrain harmonics and hydraulic lifter issues.

€142.01 €178.53

HP+® and Race Series® Adjustable Pushrods — 3/8" diameter, 0.145" wall

-€50.33

FEULING OIL PUMP CORP. HP+® and Race Series® Adjustable Pushrods — 3/8" diameter,...

Precision adjustable pushrods that maintain maximum valve lift, improve valve-train stability, and handle high-lift cams and heavy spring pressures. Double jam nut lock; fits hydraulic or solid lifters; made in the USA.

€195.73 €246.06

Pushrod Tube Kit — fits Twin Cam engines, quick-install pushrods

-€22.77

FEULING OIL PUMP CORP. Pushrod Tube Kit — fits Twin Cam engines, quick-install pushrods

Pushrod tube kit for Twin Cam engines using quick-install style pushrods. Kit includes lower tubes and clips only; use with factory inner tubes, cover cap, spring and washer.

€88.69 €111.46

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine