Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€56.72

SW-MOTECH Engine Guard — Black

The Engine Guard provides essential underbody protection for your Harley-Davidson against rock chips and collisions. It features easy installation with no modifications needed, ensuring a perfect fit.

€220.59 €277.31

-€17.37

KURYAKYN Oil Line Nacelle Cover — Chrome

Dresses the area between the cam cover and transmission and routes stock oil lines through the cover.

€67.56 €84.93

-€10.34

KURYAKYN Rear Cylinder Base Cover — Chrome, Rear

Covers the gap between the transmission top cover and the engine cylinder for a finished look. Installs quickly and easily. Durable polished finish.

€40.20 €50.54

-€18.21

KURYAKYN Cylinder Base Timing Hole Cover — Chrome

Smooths the transition from cylinders to engine cases; easy installation; precision construction for lasting fit and finish.

€70.78 €88.99

-€17.37

KURYAKYN Cylinder Base Timing Hole Cover — Chrome

Smooths the transition from the cylinders to the engine cases for a clean finish. Easy installation with basic hand tools.

€67.56 €84.93

-€18.51

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€71.98 €90.49

-€33.71

KURYAKYN One Piece Inner Primary Cover — Chrome

Precise fit with finished edges. Four mounting points for secure, quiet operation. Not for use with rear suspension lowering kits unless specified.

€131.13 €164.84

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

Precision® Tappet Block Accent Cover — Black gloss

-€20.27

KURYAKYN Precision® Tappet Block Accent Cover — Black gloss

Clean, simple addition that enhances engine style. Brilliant gloss finish.

€78.83 €99.10

-€17.37

KURYAKYN Coolant Pump Cover — Chrome

Direct OE replacement that hides an unsightly voltage regulator for a clean, factory-style appearance.

€67.56 €84.93

-€17.37

KURYAKYN Coolant Pump Cover — KUR6421, Black

Direct OE replacement; hides the voltage regulator for a clean, factory look. Easy bolt-on installation.

€67.56 €84.93

-€3.90

MOOSE OFFROAD HARD-PARTS Hose Protector — 38 mm inside diameter, 254 mm length

Shields exposed hoses from abrasion and heat; durable spring steel construction and made in the USA.

€11.05 €14.95

Hose Protector — 25 mm inside diameter, 254 mm length (10"), Silver

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 25 mm inside diameter, 254 mm length (10"),...

Protects hoses from abrasion and heat. Durable spring construction. Made in the USA.

€10.31 €13.95

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 11.00 mm ID, 254 mm length, Silver

Protects hoses from abrasion and heat.

Made in the USA.

€10.31 €13.95

Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in), silver

-€3.38

MOOSE OFFROAD HARD-PARTS Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in),...

Durable hose protector that shields hoses from abrasion and heat. Made from stainless spring steel. Made in the USA.

€9.57 €12.95

-€11.37

KURYAKYN Inner Primary Front Cover Extension — Front mount, Chrome

Puts the finishing touch on the primary. Covers the shift pivot area and grease fitting. Easily installed.

€44.24 €55.61

-€10.25

KURYAKYN Rocker Box Bolt Cover — 4 Pack, Chrome finish, Silver base

Covers for rocker box bolts that extend 5/8" above the bolt surface. Simple installation; check clearance before installing.

€39.84 €50.09

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€9.01

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€11.19 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€9.40

KIBBLEWHITE Nitrided Valve — Head 1.805", Stem 0.2760", Length 4.420"

Stellite-tipped nitrided valve engineered to reduce wear and friction, improve flow characteristics and resist corrosion.

€26.59 €35.99

Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length 4.420"

-€13.39

KIBBLEWHITE Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction. Corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€22.60 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

Nitrided Valve — Oversize, 1.630" head, 4.520" length, 0.2755" stem

-€7.49

KIBBLEWHITE Nitrided Valve — Oversize, 1.630" head, 4.520" length, 0.2755"...

One-piece stellite-tipped stainless-steel nitrided valve that reduces friction and improves wear resistance. Compatible with leaded and unleaded fuels. Made in the USA.

€29.08 €36.57

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine