Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€36.88

GOODRIDGE Hose — 366 cm (12'), stainless steel, chrome, 600-06-4

Replacement hose for reliable fluid routing. Durable construction and straightforward installation.

€31.13 €68.01

-€13.34

GOODRIDGE Fitting — oil line, chrome

Easy-to-assemble, high quality. Meets 96-hour salt spray testing. Ships complete with sealing ferrule.

€32.51 €45.85

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

Tornado Turbo Performance Kit — Polished

-€1,595.33

TRASK Tornado Turbo Performance Kit — Polished

Bolt-on power: +40–50% on stock 107", 114" and 117" M‑Eight motors.
Compressor and turbine housing with Garrett internals; plenum with integrated blow-off valve.
Includes injectors, spark plugs, boost gauge with mount, oil feed/drain lines, custom cam cover, tune files, hardware and gaskets.
Requires Thundermax ECM (sold separately). Does not fit Twin Cooled or non-removable fairing lowers. Offroad use only.
Made in the USA.

€6,204.07 €7,799.40

$Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack, Chrome$

-€15.18

NAMZ Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack,...

Custom-colored hose clamps for oil lines that fit braided copper, stainless-steel and most braided rubber hoses. Ideal for custom builds; made in the USA.

€29.47 €44.65

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

-€105.85

TRASK Assault Series Cam Cover — Chrome

Transparent cam cover that matches Assault series air cleaners and allows internal inspection. Made in the USA.

€411.66 €517.51

-€103.28

TRASK Assault Series Cam Cover — Black gloss

Transparent cam cover that matches Assault series air cleaners. Made in the USA.

€401.61 €504.89

-€103.28

TRASK Assault Series Cam Cover — Chrome

Transparent cover for viewing internal engine components. Matches the Assault series air cleaners. Made in the USA.

€401.61 €504.89

-€103.28

TRASK Assault Series Cam Cover — Black Gloss

Transparent cam cover that matches Assault series air cleaners. Made in the USA.

€401.61 €504.89

Assault Series Cam Cover — TM-018R, Raw, Machined

-€183.59

TRASK Assault Series Cam Cover — TM-018R, Raw, Machined

Transparent cover for viewing internal engine components; matches Assault series air cleaners. Made in the USA.

€321.30 €504.89

-€11.75

GOODRIDGE Hose — Oil line, Chrome

Replacement hose for repair or upgrade.

€45.55 €57.30

-€60.02

TRASK Mystfree Kit — Crankcase breather valve, Aluminum

Improves oil drainage to the rocker; reduces oil misting from engine breathers; machined T-6061 billet construction; made in the U.S.A.

€233.41 €293.43

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

-€7.32

JAMES GASKET Carburetor Insulator Block Kit — JAMES GASKET, 29250-98-A, Kit

Kit includes 3/8" fiber insulator block and gaskets to reduce fuel boiling and vapor lock; made in the U.S.A.

€24.89 €32.21

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€9.01

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€11.19 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

-€34.04

JAMES GASKET Cylinder Head/Base Gasket Kit — 4.000", 0.51 mm, 1.14 mm

Complete kit with matching head and base gaskets plus O-rings where applicable. Made in the USA.

€72.34 €106.38

Replacement Cylinder Head and Compliance Fitting Gaskets — 3.750" bore, 0.91 mm thickness, 5-pack

-€15.41

JAMES GASKET Replacement Cylinder Head and Compliance Fitting Gaskets —...

Made in the USA replacement gasket set that restores proper sealing and reduces leaks. Easy to install with standard tools.

€52.39 €67.80

Air Cleaner to Carburetor Gasket — Backplate, beaded, air cleaner-to-carburetor fit, 5 Pack

-€3.54

JAMES GASKET Air Cleaner to Carburetor Gasket — Backplate, beaded, air...

MicroPore® paper resists fluid migration and seals reliably up to 500°F. Foam-core with nitrile coating and silicone release for easy disassembly. Made in the USA.

€12.03 €15.57

-€10.07

JAMES GASKET Primary Gasket — Primary Cover, Part No. 25352-00-F

Top-quality primary gasket with silicone beading for improved sealing. Meets or exceeds OEM specs. Made in the USA.

€34.25 €44.32

-€8.91

JAMES GASKET Transmission Oil Pan Gasket — 5 Pack

Dependable transmission oil pan gasket engineered for a secure seal and straightforward serviceability.

€30.31 €39.22

-€9.40

KIBBLEWHITE Nitrided Valve — Head 1.805", Stem 0.2760", Length 4.420"

Stellite-tipped nitrided valve engineered to reduce wear and friction, improve flow characteristics and resist corrosion.

€26.59 €35.99

Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length 4.420"

-€13.39

KIBBLEWHITE Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction. Corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€22.60 €35.99

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine