Engine

-€29.48

THRASHIN SUPPLY CO. Skid Plate — Raw

Durable skid plate for protection against road debris, easy installation, and made in the USA.

€83.41 €112.89

$Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack, Chrome$

-€15.18

NAMZ Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack,...

Custom-colored hose clamps for oil lines that fit braided copper, stainless-steel and most braided rubber hoses. Ideal for custom builds; made in the USA.

€29.47 €44.65

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

-€17.92

THRASHIN SUPPLY CO. Points Cover — Black, 6061 billet aluminum

Durable points cover with precision fit for restoring and protecting the ignition assembly. Made in the USA.

€50.68 €68.60

-€19.09

THRASHIN SUPPLY CO. Points Cover — Black

Precision-machined points cover with durable construction. Made in the USA.

€53.97 €73.06

-€3.90

MOOSE OFFROAD HARD-PARTS Hose Protector — 38 mm inside diameter, 254 mm length

Shields exposed hoses from abrasion and heat; durable spring steel construction and made in the USA.

€11.05 €14.95

Hose Protector — 25 mm inside diameter, 254 mm length (10"), Silver

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 25 mm inside diameter, 254 mm length (10"),...

Protects hoses from abrasion and heat. Durable spring construction. Made in the USA.

€10.31 €13.95

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 11.00 mm ID, 254 mm length, Silver

Protects hoses from abrasion and heat.

Made in the USA.

€10.31 €13.95

Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in), silver

-€3.38

MOOSE OFFROAD HARD-PARTS Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in),...

Durable hose protector that shields hoses from abrasion and heat. Made from stainless spring steel. Made in the USA.

€9.57 €12.95

-€33.50

THRASHIN SUPPLY CO. Cam Cover — Black, hard-anodized

Slim, low-profile cam cover with a cut-away corner for improved floorboard clearance. Hardware included. Made in the USA.

€94.80 €128.30

Cam Cover — Chrome, Triple Nickel Plated, 6061 Aluminum

-€36.55

THRASHIN SUPPLY CO. Cam Cover — Chrome, Triple Nickel Plated, 6061 Aluminum

Slim, cutaway design improves floorboard clearance. Includes mounting hardware. Made in the USA.

€103.42 €139.97

Cam Cover — Chrome, Triple Nickle Plated

-€39.61

THRASHIN SUPPLY CO. Cam Cover — Chrome, Triple Nickle Plated

Slim-profile cam cover with a cut-away corner for improved floorboard clearance. Hardware included. Made in the USA.

€112.03 €151.64

-€36.55

THRASHIN SUPPLY CO. Cam Cover — Cam, Black anodized

Slim cam cover with a cut-away corner for improved floorboard clearance. Hardware included. Made in the USA.

€103.42 €139.97

Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift, Model TQ230V3

-€124.12

COMP CAMS Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift,...

Performance camshaft delivering broad torque or top-end power, billet-steel construction, made in the USA.

€255.84 €379.96

-€99.30

COMP CAMS Mega 8 Camshaft — Model 234A, 240°/234° duration, 0.472" lift

High-performance camshaft with Endurance Ramps for broader torque, reduced valve train noise, and increased stability; constructed from billet steel and made in the USA.

€280.66 €379.96

-€110.72

COMP CAMS Mega 8 Camshaft — Bolt-In, Model 238A

High-performance camshaft with Endurance Ramps for broad torque, reduced valve train noise, and billet steel construction.

€228.16 €338.88

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

-€5.05

CYCLE PERFORMANCE PROD. Spark Plug Indexing Washer — Kit, Bronze

Indexes spark plug electrode gap toward intake valve
Includes five 0.40" thick, five 0.50" thick, and five 0.60" thick washers
Made in the USA

€14.68 €19.73

V-Thunder™ Performance Forged Tappet — Black Oxide

-€19.10

COMP CAMS V-Thunder™ Performance Forged Tappet — Black Oxide

Forged performance replacement for stock hydraulic roller lifters. 100% tested and made in the U.S.A.

€54.03 €73.13

V-Thunder™ Race Forged Tappet — Black oxide

-€20.01

COMP CAMS V-Thunder™ Race Forged Tappet — Black oxide

Race/slow bleed upgrade design for high-performance use; each unit 100% tested; durable oxide finish; made in the U.S.A.

€56.63 €76.64

-€99.87

COMP CAMS V-Thunder™ Race Forged Tappet — Set of 4, Black Oxide

Race/slow bleed upgrade design for high-performance use. Each unit is 100% tested for proper function. Made in the United States.

€282.59 €382.46

-€34.71

PAUGHCO Toolbox Mounting Kit — Left, Chrome

Spacer and longer bolt provide added clearance between the footpeg and toolbox; fits either side; toolboxes sold separately; made in USA.

€43.63 €78.34

Engine Adapter Plate — Fits Twin Cam 88 "A" to Evolution-style Softail or Rigid frames

-€65.55

PAUGHCO Engine Adapter Plate — Fits Twin Cam 88 "A" to Evolution-style...

Mounts Twin Cam 88 "A" motor into Evolution-style Softail or Rigid frames. Made in the USA.

€254.91 €320.46

-€18.57

PAUGHCO Chrome XL Front Lower Motor Mounts — Engine

Sold in pairs. Made in the U.S.A. Precision-machined for reliable performance and simple installation.

€58.58 €77.15

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€11.51
Out of Stock

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine