Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

$Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack, Chrome$

-€15.18

NAMZ Colored Hose Clamps for Oil Lines — 3/8\" oil lines, 6-pack,...

Custom-colored hose clamps for oil lines that fit braided copper, stainless-steel and most braided rubber hoses. Ideal for custom builds; made in the USA.

€29.47 €44.65

-€3.90

MOOSE OFFROAD HARD-PARTS Hose Protector — 38 mm inside diameter, 254 mm length

Shields exposed hoses from abrasion and heat; durable spring steel construction and made in the USA.

€11.05 €14.95

Hose Protector — 25 mm inside diameter, 254 mm length (10"), Silver

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 25 mm inside diameter, 254 mm length (10"),...

Protects hoses from abrasion and heat. Durable spring construction. Made in the USA.

€10.31 €13.95

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 11.00 mm ID, 254 mm length, Silver

Protects hoses from abrasion and heat.

Made in the USA.

€10.31 €13.95

Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in), silver

-€3.38

MOOSE OFFROAD HARD-PARTS Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in),...

Durable hose protector that shields hoses from abrasion and heat. Made from stainless spring steel. Made in the USA.

€9.57 €12.95

Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift, Model TQ230V3

-€124.12

COMP CAMS Mega 8 Camshaft — 232° exhaust / 230° intake, 0.472" lift,...

Performance camshaft delivering broad torque or top-end power, billet-steel construction, made in the USA.

€255.84 €379.96

-€99.30

COMP CAMS Mega 8 Camshaft — Model 234A, 240°/234° duration, 0.472" lift

High-performance camshaft with Endurance Ramps for broader torque, reduced valve train noise, and increased stability; constructed from billet steel and made in the USA.

€280.66 €379.96

-€110.72

COMP CAMS Mega 8 Camshaft — Bolt-In, Model 238A

High-performance camshaft with Endurance Ramps for broad torque, reduced valve train noise, and billet steel construction.

€228.16 €338.88

-€124.12

COMP CAMS Mega 8 Camshaft — Model 248C, High-Lift

High-performance camshaft series featuring Endurance Ramps, reduced valve-train noise, billet-steel construction, and USA manufacturing.

€255.84 €379.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€9.01

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€11.19 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome, Silver

-€7.36

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome,...

Precision kit for rotors with a 3.25" bolt circle. Single kit for single-disc installations; two kits required for dual-disc setups. Made in the U.S.A.

€28.63 €35.99

-€5.56

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16 thread, 25.4 mm (1")

Kit for mounting rotors to hubs; sturdy construction and made in the U.S.A.

€21.65 €27.21

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing, Silver

-€7.74

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Secure, precision fastener for motorcycle control assemblies. Made in the U.S.A.

€30.10 €37.84

-€1.60

GARDNER-WESTCOTT Fork Drain Plugs — for 41 mm tubes, chrome

Durable fork drain plugs for fast, clean oil changes. Made in the USA.

€6.24 €7.84

Riser Mounting Bolt Set — 2-3/4 in, hex head, chrome

-€5.19

GARDNER-WESTCOTT Riser Mounting Bolt Set — 2-3/4 in, hex head, chrome

Includes 1/2"-13 x 2-3/4" hex-head bolts with lock and cup washers. Made in the U.S.A.

€20.22 €25.41

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"), Silver

-€5.96

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"),...

Fits rotors with a 3.25" bolt circle. Dual disc applications require two kits. Made in the U.S.A.

€23.17 €29.13

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"), Torx®

-€4.21

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"),...

Complete rotor-to-hub kit for single-disc applications. Two kits required for dual-disc setups.

€16.38 €20.59

-€2.82

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 7/8 in length

Fits rotors with a 3.25" bolt circle. One kit per rotor; dual-disc setups require two kits. Made in the U.S.A.

€10.99 €13.81

Primary and Derby Cover Bolt Kit — Chrome, Steel

-€18.00

GARDNER-WESTCOTT Primary and Derby Cover Bolt Kit — Chrome, Steel

Complete bolt kit for primary and derby cover service. Made in the U.S.A.

€70.01 €88.01

-€5.30

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Durable fastener engineered for secure attachment of control assemblies; precision fit and corrosion resistance.

€20.61 €25.91

Caliper Mounting Bolt Kit — Socket-head, Chrome, Kit

-€4.87

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Socket-head, Chrome, Kit

Direct replacement for OEM caliper mounting bolts and washers. Includes complete hardware for one caliper assembly. Made in the USA.

€18.92 €23.79

-€9.40

KIBBLEWHITE Nitrided Valve — Head 1.805", Stem 0.2760", Length 4.420"

Stellite-tipped nitrided valve engineered to reduce wear and friction, improve flow characteristics and resist corrosion.

€26.59 €35.99

Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length 4.420"

-€13.39

KIBBLEWHITE Nitrided Valve — Head Diameter 1.900", Stem 0.2760", Length...

One-piece nitrided valve with stellite tip for improved wear resistance and reduced friction. Corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€22.60 €35.99

-€11.55

KIBBLEWHITE Nitrided Valve — 1.575" head, 0.2755" stem, 4.520" length

Stellite-tipped nitrided valve offering improved wear resistance, corrosion protection, and enhanced flow. Made in USA.

€32.68 €44.23

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine