Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT male, Anodized Black

-€6.00

RUSSELL Universal Adapter Fitting — 45° fitting, -6 AN male, 1/8" NPT...

Compact adapter for secure hose and connector joins; easy to install and maintain.

€2.29 €8.29

-€5.73

RUSSELL Universal Hose End — -8 AN female, 45° fitting, Anodized Black

Lightweight anodized hose end engineered for universal hoses; precision-machined and sold individually.

€16.68 €22.41

-€7.15

RUSSELL Universal Hose End — -8 AN, 90° fitting, Anodized Black

Precision-machined hose end for reliable, leak-resistant connections.

€9.99 €17.14

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D., 0.788" I.D., 1.065" O.L.

Made to exact tolerances; does not include oil holes; made in USA.

€6.76 €9.16

Fork Stem Nut Cap — Fork tube, silver, chrome

-€3.73

COLONY Fork Stem Nut Cap — Fork tube, silver, chrome

Polished nut cap that conceals and protects the stem nut. Made in the U.S.A.

€10.55 €14.28

-€2.50

COLONY Fuel Tank Mounting Grommet Kit — Fuel Tank, Black

Includes 6 rubber grommets and 2 metal sleeves. One kit required per set. Made in the United States.

€9.69 €12.19

-€4.55

COLONY Inner Primary Mounting Kit — Inner primary, Hex, Silver

Includes all hardware required to install an inner primary. Made in the USA.

€17.69 €22.24

-€2.69

COLONY Oil Pump Plug — Oil pump, Chrome

Plug and plug kits for Harley-Davidson oil systems. Complete with washers or O-rings; made in the U.S.A.

€7.59 €10.28

-€3.95

COLONY Rear Axle Adjuster Bolts — Pair, Chrome

Heat-treated, plated adjuster bolts with included lock nuts; made in the USA.

€15.39 €19.34

-€1.46

COLONY Fork Slider Drain Screws — Fork Slider, Chrome, Pair

Two button head Allen screws with two copper compression washers; made in the U.S.A.

€4.14 €5.60

-€2.53

COLONY Stem Bolt Kit — Steering, Hex head

Replacement stem bolt kit with washer; made in the U.S.A.

€7.15 €9.68

-€2.73

COLONY Stem Cap — Fits stem bolt, chrome finish

Fits Stem Bolt Kit (Part# 2401-0117).

Made in the U.S.A.

€7.73 €10.46

$Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm (1-3/4\"), Chrome, fits cast & spoke rear wheels$

-€6.22

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 44.4 mm...

Complete mounting kits for brake rotors, sprockets and belt pulleys; fits virtually all H-D brakes, chain and belt drives.

€24.18 €30.40

Rotor, Sprocket and Belt Mounting Hardware Kit — 57.2 mm (2-1/4"), for cast and spoke rear wheels, Chrome

-€6.50

COLONY Rotor, Sprocket and Belt Mounting Hardware Kit — 57.2 mm...

Complete mounting hardware kit for rotors, sprockets and belt drives. Includes all necessary fasteners and fits virtually all H-D brakes, chain and belt drives.

€25.26 €31.76

S&S Air Cleaner Cover Mounting Screw Kit — Fits air cleaner cover, Silver

-€1.57

COLONY S&S Air Cleaner Cover Mounting Screw Kit — Fits air cleaner...

Three custom screws to mount S&S air cleaner covers. Made in the U.S.A.

€4.43 €6.00

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D. x 0.925" I.D. x 1.040" O.L.

Made to exact tolerances for OE-style fit and wear.
Made in the USA.
Does not include oil hole(s); must be drilled after installation.

€14.92 €20.20

-€3.63

COLONY Exhaust Port Kit — Exhaust port, Silver

Includes four studs and four flanged nuts for secure exhaust attachment.

Made in the U.S.A.

€14.14 €17.77

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made to exact tolerances for OE-style fitment. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€7.50 €10.15

Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome, Silver

-€7.36

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome,...

Precision kit for rotors with a 3.25" bolt circle. Single kit for single-disc installations; two kits required for dual-disc setups. Made in the U.S.A.

€28.63 €35.99

-€5.56

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16 thread, 25.4 mm (1")

Fits rotors with a 3.25" bolt circle; dual-disc applications require two kits; made in the U.S.A.

€21.65 €27.21

Handlebar Lever Switch Housing Master Cylinder Fastener — handlebar lever mount, master cylinder, switch housing

-€7.74

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Made in the U.S.A. Precision fastener for secure mounting of motorcycle control components.

€30.10 €37.84

-€1.60

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes, Chrome

Precision drain plugs for fork maintenance, built for durability and reliable sealing.

€6.24 €7.84

Riser Mounting Bolt Set — 2-3/4" (69.9 mm), Chrome

-€5.19

GARDNER-WESTCOTT Riser Mounting Bolt Set — 2-3/4" (69.9 mm), Chrome

Includes 1/2"-13 x 2-3/4" hex-head bolts, lock washers and cup washers. Made in the U.S.A.

€20.22 €25.41

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"), Silver

-€5.96

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8"),...

Kits fit rotors with 3.25" bolt circle.

Dual disc applications require two kits.

Made in the U.S.A.

€23.17 €29.13

Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8 in), Silver

-€4.21

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 22.2 mm (7/8...

Kits fit rotors with a 3.25" bolt circle. Dual disc applications require two kits. Made in the U.S.A.

€16.38 €20.59

-€2.82

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 5/16-18 thread, 7/8 in length

Fits rotors with a 3.25" bolt circle. One kit per rotor; dual-disc setups require two kits. Made in the U.S.A.

€10.99 €13.81

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine