Engine

-€2.51

EASTERN MOTORCYCLE PARTS Cam Shims — 0.015", 10-pack

Essential shims for setting up new cams. Made in the USA.

€7.09 €9.60

-€4.58

EASTERN MOTORCYCLE PARTS Cam Shims — 0.45", 5-pack

Precision cam shims for accurate valve adjustment. Made in the U.S.A.

€12.93 €17.51

-€17.37

KURYAKYN Oil Line Nacelle Cover — Chrome

Dresses the area between the cam cover and transmission and routes stock oil lines through the cover.

€67.56 €84.93

-€10.34

KURYAKYN Rear Cylinder Base Cover — Chrome, Rear

Covers the gap between the transmission top cover and the engine cylinder for a finished look. Installs quickly and easily. Durable polished finish.

€40.20 €50.54

-€18.21

KURYAKYN Cylinder Base Timing Hole Cover — Chrome

Smooths the transition from cylinders to engine cases; easy installation; precision construction for lasting fit and finish.

€70.78 €88.99

-€17.37

KURYAKYN Cylinder Base Timing Hole Cover — Chrome

Smooths the transition from the cylinders to the engine cases for a clean finish. Easy installation with basic hand tools.

€67.56 €84.93

-€18.51

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€71.98 €90.49

-€33.71

KURYAKYN One Piece Inner Primary Cover — Chrome

Precise fit with finished edges. Four mounting points for secure, quiet operation. Not for use with rear suspension lowering kits unless specified.

€131.13 €164.84

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

Precision® Tappet Block Accent Cover — Black gloss

-€20.27

KURYAKYN Precision® Tappet Block Accent Cover — Black gloss

Clean, simple addition that enhances engine style. Brilliant gloss finish.

€78.83 €99.10

-€17.37

KURYAKYN Coolant Pump Cover — Chrome

Direct OE replacement that hides an unsightly voltage regulator for a clean, factory-style appearance.

€67.56 €84.93

-€17.37

KURYAKYN Coolant Pump Cover — KUR6421, Black

Direct OE replacement; hides the voltage regulator for a clean, factory look. Easy bolt-on installation.

€67.56 €84.93

Engine Stabilizer Link Cover — Stabilizer link, black, powder-coated

-€6.37

CIRO Engine Stabilizer Link Cover — Stabilizer link, black,...

Quick installation, clean classic look, durable finish, secures the factory component in place.

€24.80 €31.17

-€11.22

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 6-pack, sizes 0.100"–0.150"

Precision spacers for cam drive sprockets. Made in the U.S.A.; check alignment and torque during installation.

€31.73 €42.95

-€1.49

EASTERN MOTORCYCLE PARTS Piston Pin Clips — 10-pack, A-22097-99

Direct-fit piston pin clips for many Harley models. Made in the USA and built to OEM-equivalent standards.

€4.22 €5.71

-€11.37

KURYAKYN Inner Primary Front Cover Extension — Front mount, Chrome

Puts the finishing touch on the primary. Covers the shift pivot area and grease fitting. Easily installed.

€44.24 €55.61

-€5.00

EASTERN MOTORCYCLE PARTS Oil Screens — 5-pack

Precision mesh oil screens that trap debris and protect oil passages. Made in the U.S.A.

€14.11 €19.11

-€11.74

EASTERN MOTORCYCLE PARTS Motor Sprocket Shaft Spacer — A-24008-99

Precision-machined spacer for motor sprocket shafts. Made in the USA.

€33.17 €44.91

-€7.41

EASTERN MOTORCYCLE PARTS Counterbalance Shaft Bearing — Left mount

High-quality replacement bearing for counterbalance shafts. Made in the U.S.A.

€20.97 €28.38

-€6.88

EASTERN MOTORCYCLE PARTS Counterbalance Shaft Bearing — Right mount, A-8991

Precision counterbalance shaft bearing — high-quality replacement; made in the U.S.A.

€19.47 €26.35

-€4.58

EASTERN MOTORCYCLE PARTS Right Side Crankcase Bearing Washers — Right, 5 pack

Precision support discs for motorcycle bearing assemblies. Durable steel construction with corrosion-resistant finish. Made in the U.S.A.

€12.93 €17.51

-€8.08

EASTERN MOTORCYCLE PARTS Dowel Pins — 0.434" x 0.500" L, 10 pack

Replacement dowel pins for precise alignment and secure assembly.

€22.84 €30.92

-€2.53

EASTERN MOTORCYCLE PARTS Push Rod Tube Washers — 10 Pack

Precision-fit components that seal and secure engine tube assemblies. Made in the USA.

€7.15 €9.68

-€7.67

EASTERN MOTORCYCLE PARTS Transmission Lock Tab Washers — 10-pack, A-35050-40

Replace during transmission service to maintain secure lock tab fastening.

€8.22 €15.89

-€10.25

KURYAKYN Rocker Box Bolt Cover — 4 Pack, Chrome finish, Silver base

Covers for rocker box bolts that extend 5/8" above the bolt surface. Simple installation; check clearance before installing.

€39.84 €50.09

-€7.13

EASTERN MOTORCYCLE PARTS Knucklehead Oil Line — Chrome

Direct-fit oil line for Knucklehead engines. Easy installation; professional fitting recommended.

€20.16 €27.29

Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE PARTS, A-24004-03

-€30.82

EASTERN MOTORCYCLE PARTS Left Side Sprocket Shaft Bearing Kit — EASTERN MOTORCYCLE...

Left side sprocket shaft bearing kit for maintenance and rebuilds. Bearing and bearing race sold separately.

€87.10 €117.92

-€5.08

EASTERN MOTORCYCLE PARTS Cam Support Plate/Cover Bushing — A-25344-99, Pinion

Precision support insert for cam support plate/cover; OEM-quality construction made in the U.S.A., designed to restore proper alignment and reduce wear.

€14.34 €19.42

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine