Engine

-€2.48

KIBBLEWHITE Seal Valve — 3/8" stem, 4-pack

OE-style low-friction PTFE intake valve seals with steel-clad, low-profile design that resists high temperatures and controls oil flow.

€7.02 €9.50

-€17.37

KURYAKYN Oil Line Nacelle Cover — Chrome

Dresses the area between the cam cover and transmission and routes stock oil lines through the cover.

€67.56 €84.93

-€10.34

KURYAKYN Rear Cylinder Base Cover — Chrome, Rear

Covers the gap between the transmission top cover and the engine cylinder for a finished look. Installs quickly and easily. Durable polished finish.

€40.20 €50.54

-€18.21

KURYAKYN Cylinder Base Timing Hole Cover — Chrome

Smooths the transition from cylinders to engine cases; easy installation; precision construction for lasting fit and finish.

€70.78 €88.99

-€18.51

KURYAKYN Oil Cooler Cover — Chrome

Direct-fit oil cooler cover that installs like the stock factory cover for a quick bolt-on upgrade.

€71.98 €90.49

-€17.37

KURYAKYN Oil Cooler Cover — Chrome

Bolt-on oil cooler cover installs like the stock factory cover. Durable, lightweight design for a refined appearance.

€67.56 €84.93

-€33.71

KURYAKYN One Piece Inner Primary Cover — Chrome

Precise fit with finished edges. Four mounting points for secure, quiet operation. Not for use with rear suspension lowering kits unless specified.

€131.13 €164.84

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Enhances the center of the oil cooler trim with a stylish guard. Easy to install and built in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Dresses up the oil cooler area with matching vent‑screen material; easy to install. Made in the USA.

€44.80 €56.31

-€11.51

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

-€11.51

KLOCK WERKS Oil Cooler Guard — Chrome

Finishes the oil cooler area, adds visual pop, easy to install, made in the USA.

€44.80 €56.31

Precision® Tappet Block Accent Cover — Black gloss

-€20.27

KURYAKYN Precision® Tappet Block Accent Cover — Black gloss

Clean, simple addition that enhances engine style. Brilliant gloss finish.

€78.83 €99.10

-€17.37

KURYAKYN Coolant Pump Cover — Chrome

Direct OE replacement that hides an unsightly voltage regulator for a clean, factory-style appearance.

€67.56 €84.93

-€17.37

KURYAKYN Coolant Pump Cover — KUR6421, Black

Direct OE replacement; hides the voltage regulator for a clean, factory look. Easy bolt-on installation.

€67.56 €84.93

-€13.62

SLYFOX Timing Cover — Gloss

Lightweight carbon-fiber protective plate for engine front components.

€52.86 €66.48

-€13.62

SLYFOX Timing Cover — Matte

Carbon fiber construction for lightweight strength and durable protection.

€52.86 €66.48

Clutch Cover - HD Touring from 2018 — fits Harley-Davidson Touring 2018, Black

-€19.57

CULT WERK Clutch Cover - HD Touring from 2018 — fits Harley-Davidson...

Fits all Harley-Davidson Touring models from 2018; precision milled and lasered; direct replacement for the OEM cover.

€112.93 €132.50

Ignition Cover M8 — Fits Harley-Davidson 2017+ M8 (107, 114, 117), Black

-€15.87

CULT WERK Ignition Cover M8 — Fits Harley-Davidson 2017+ M8 (107, 114,...

Precision-milled ignition cover; direct replacement for Harley-Davidson® models from 2017 with Millwaukee-Eight (M8) engines (107, 114 & 117).

€91.63 €107.50

-€11.37

KURYAKYN Inner Primary Front Cover Extension — Front mount, Chrome

Puts the finishing touch on the primary. Covers the shift pivot area and grease fitting. Easily installed.

€44.24 €55.61

-€10.25

KURYAKYN Rocker Box Bolt Cover — fits rocker box, chrome

Protects exposed bolts; covers extend 5/8” above bolt; simple installation. Ensure adequate clearance before installing.

€39.84 €50.09

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Pair, Black, Chrome

Reduces hot starts and starter/battery load. 5–7 N closing force. Cool-touch molded knobs. Made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, pair, Black, Chrome

State-of-the-art compression release valves that reduce hot starts and lower starter and battery loads. Sold as a set and made in the U.S.A.

€31.00 €41.96

-€10.96

KIBBLEWHITE Compression Release Valve — M10 x 1.0, Black, Chrome, Pair

State-of-the-art design to reduce hot starts and starter/battery loads. Custom molded knobs, sold in pairs, made in the U.S.A.

€31.00 €41.96

-€2.40

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.

Precision wrist pin bushing made to exact tolerances. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€6.76 €9.16

Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660 Bronze

-€5.28

KIBBLEWHITE Wrist Pin Bushing — 1.019" O.D x 0.925" I.D x 1.040" O.L., 660...

Made to exact tolerances and built for long service life. Made in the USA. Does not include oil hole(s); holes must be drilled after installation.

€14.92 €20.20

-€2.65

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 0.945" O.L.

Made in the USA. Meets or exceeds OE-style fitment and wearability. Does not include oil hole(s); drill after installation.

€7.50 €10.15

Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome, Silver

-€7.36

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16, 25.4 mm (1") , Chrome,...

Precision kit for rotors with a 3.25" bolt circle. Single kit for single-disc installations; two kits required for dual-disc setups. Made in the U.S.A.

€28.63 €35.99

-€5.56

GARDNER-WESTCOTT Disc Brake Rotor-To-Hub Kit — 3/8-16 thread, 25.4 mm (1")

Fits rotors with a 3.25" bolt circle; dual-disc applications require two kits; made in the U.S.A.

€21.65 €27.21

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing, Silver

-€7.74

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Secure, precision fastener for motorcycle control assemblies. Made in the U.S.A.

€30.10 €37.84

-€1.60

GARDNER-WESTCOTT Fork Drain Plugs — For 41 mm tubes, Chrome

Precision drain plugs for fork maintenance, built for durability and reliable sealing.

€6.24 €7.84

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine