Engine

-€56.72

SW-MOTECH Engine Guard — Black, lower mounting position

Underbody protection with bike-specific fit and easy installation; mounting material and instructions included.

€220.59 €277.31

Quick Fill Presta Tubeless Valve Set — short stem 16-24 mm, long stem 23-31 mm, fits e*thirteen rims

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — short stem 16-24 mm,...

Resists sealant build-up to prevent clogging, oversize stem for high-volume flow, and a removable two-piece valve for easy cleaning. Short and long stem fitments available.

€22.92

Quick Fill Presta Tubeless Valve Set — 16-24mm short stem, 23-31mm long stem, black

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — 16-24mm short stem,...

Presta tubeless valves that resist sealant clogging, enable high-flow inflation and are easy to clean.

€22.92

Quick Fill Presta Tubeless Valve Set — Short stem 16–24 mm, Long stem 23–31 mm, Bronze

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — Short stem 16–24 mm,...

Prevents sealant from clogging the stem and allows faster inflation with its oversize design.

€22.92

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — Purple

Prevents sealant build-up at the valve for clean, reliable inflation.

Oversize stem for high-volume flow and easy pressure adjustments.

Two-piece body with removable valve for simple cleaning.

Short and long stem lengths cover a wide range of rim fits.

€22.92

Quick Fill Presta Tubeless Valve Set — Short stem 16–24mm, Long stem 23–31mm, Orange

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — Short stem 16–24mm,...

Prevents sealant from clogging the valve. Oversize stem for faster inflation and easier pressure control. Two-piece removable valve for simple cleaning. Short and long stem lengths fit a range of e*thirteen rims.

€22.92

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — Short stem 16–24mm,...

Prevents sealant clogs and sticky mess; oversize stems for fast inflation; two-piece body with removable valve for easy cleaning. Short 16–24mm, long 23–31mm.

€22.92

Quick Fill Presta Tubeless Valve Set — Short 16–24 mm, Long 23–31 mm, Purple

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — Short 16–24 mm, Long...

Prevents sealant clogging and sticky messes; oversize stem for fast inflation and easy pressure adjustments; removable valve for simple cleaning. Short 16–24 mm and long 23–31 mm fitments.

€22.92

Quick Fill Presta Tubeless Valve Set — 16–24mm, 23–31mm stems, Orange

E*THIRTEEN Quick Fill Presta Tubeless Valve Set — 16–24mm, 23–31mm stems,...

Resists sealant build-up and clogging at the valve for cleaner maintenance.
Oversize stem for higher flow, faster inflation, and easier pressure control.
Two-piece body with removable core for easy cleaning.
Short 16–24mm and long 23–31mm stem lengths for wide rim compatibility.

€22.92

Forceflow Cylinder Head Cooler Kit — Black

-€151.61

JIMS Forceflow Cylinder Head Cooler Kit — Black

Plug-and-play cylinder head cooling kit with a high-powered waterproof fan and automatic temperature switch that engages at 140°F. Not for "Twin Cooled" models.

€589.64 €741.25

Engine Stabilizer Link Cover — Stabilizer link, black, powder-coated

-€6.37

CIRO Engine Stabilizer Link Cover — Stabilizer link, black,...

Quick installation, clean classic look, durable finish, secures the factory component in place.

€24.80 €31.17

-€8.96

JIMS Forceflow Cylinder Head Cooler Mount — Chrome

Secure, precision-machined mount for head coolers; fits many V-twin applications. 110" motors need optional adapter (sold separately).

€34.85 €43.81

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€5.05

CYCLE PERFORMANCE PROD. Spark Plug Indexing Washer — 5×0.40 in, 5×0.50 in, 5×0.60 in

Set of 15 indexing washers (5×0.40 in, 5×0.50 in, 5×0.60 in) to align spark plug electrodes toward the intake valve.

€14.68 €19.73

-€55.53

JIMS Rocker Arm Shaft Kit — PN 5837

Performance rocker arm shafts and precision hardware machined from low-alloy case-hardened steel; hardware flats held to a .0005” parallel tolerance.

€215.98 €271.51

-€42.27

JIMS Powerglide II Hydraulic Tappets — Standard, 0.842 in

Extensively developed hydraulic tappets featuring a billet body, increased roller width, hand-honed hydraulic cavity, over 30% higher dynamic load capacity, and improved lubrication for longer life. Made in the U.S.A.

€164.39 €206.66

-€40.73

JIMS Hydrosolid Tappets — Diameter 0.8420"

Performs as a hydraulic tappet to 5,500 rpm, then becomes a solid tappet for increased horsepower; requires adjustable pushrods. Made in the U.S.A.

€158.41 €199.14

Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic, standard

-€33.39

JIMS Powerglide™ Steady Roll Tappets — 0.8420" diameter, hydraulic,...

Powerglide™ Steady Roll Tappets: billet steel body, hand‑honed hydraulic cavity, bronze Steady Roll bushing for increased load capacity, lubrication and life.

€129.84 €163.23

Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440 in diameter, Hydraulic

-€37.86

JIMS Powerglide™ Steady Roll Tappets — Oversize (+0.002 in), 0.8440...

Powerglide™ Steady Roll tappets with a Steady Roll bronze bushing, billet steel body and enhanced lubrication for longer service life.

€91.71 €129.57

-€129.35

JIMS Flow Pro 1 Billet Oil Pump Body — Flow Pro 1, black

CNC-machined pump body with matched feed and return gears increases oil return and reduces drag. Includes body, gears, shaft and plugs; cover and mounting hardware not included.

€503.06 €632.41

-€24.44

JIMS Rocker Arm Shaft — Part 17611-66B

Durable rocker arm shaft for precise valve-train operation. Made in the U.S.A.

€95.06 €119.50

-€18.35

JIMS Rocker Arm Bushings — 8-pack

Premium American-made valve-train components for precision performance and long service life.

€71.35 €89.70

Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio, set of 4, steel

-€228.22

JIMS Roller Rocker Arms — fits cams to 0.700" lift at 1.625 ratio,...

Ultra-light roller rocker arms with 660 bronze bushings and a bearing-grade roller tip. Accepts up to 0.700" lift; Twin Cam boxes may need clearance.

€887.55 €1,115.77

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine