Engine

-€19.20

DRAG SPECIALTIES Crankcase Vent Line — Chrome

Durable replacement for the OEM rubber crankcase-to-oil tank line; includes fittings for easy installation; made in the USA.

€54.26 €73.46

-€3.54

DRAG SPECIALTIES Bolt-In Valve Stem — 6.1 mm hole, Chrome

Secure valve stem designed for reliable sealing and straightforward installation.

€7.59 €11.13

-€44.73

DRAG SPECIALTIES Stainless Steel Braided Oil Line Kit — 4-line kit, chrome

Complete replacement kit with chrome-plated compression and NPT fittings. Direct OEM-fit replacement; made in the USA.

€126.42 €171.15

-€3.70

DRAG SPECIALTIES Bolt-In Valve Stem

Durable Bolt-In Valve Stem with metal bottom and rubber seal for optimal performance.

€7.92 €11.62

High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075 Billet Aluminum

-€86.08

FEULING OIL PUMP CORP. High Flow Camplate — High Flow, Gear Drive, Chain Drive, 7075...

Improves oil circulation by matching camplate and case portholes, increases oil volume and cooling, includes bearing and retainer hardware. For use only with Feuling® oil pumps.

€334.76 €420.84

Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"), 205 mm (8"), 1/8" NPT, Chrome

-€8.07

DRAG SPECIALTIES Universal Stainless Steel Braided Oil Line — 8.7 mm (11/32"),...

Universal braided oil line with compression fittings; measured overall including fittings; made in the USA.

€22.78 €30.85

-€29.48

THRASHIN SUPPLY CO. Skid Plate — Raw

Durable skid plate for protection against road debris, easy installation, and made in the USA.

€83.41 €112.89

-€41.28

THRASHIN SUPPLY CO. Skid Plate — Black

Shields exposed water lines and wiring from road scrapes and debris. 0.125" thick 5052 aluminum construction. Includes mounting hardware; easy installation.

€116.78 €158.06

Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006 fitment, front 0.100", rear 0.110–0.150"

-€15.08

FEULING OIL PUMP CORP. Camshaft/Sprocket Thrust Washer Alignment Kit — 1999–2006...

Aligns the rear cam sprocket to the crank sprocket for correct chain alignment. Includes front thrust washer 0.100" and rear alignment washers 0.110", 0.120", 0.130", 0.140", 0.150".

€58.80 €73.88

-€19.12

DRAG SPECIALTIES Fuel/Oil Line — 9.5 mm (3/8"), 244 cm (8'), Black

Reinforced smooth-bore fuel and oil line that resists fuel and oil. Made in the USA.

€54.05 €73.17

-€5.94

DRAG SPECIALTIES Fuel/Oil Line — 12.7 mm (1/2"), 61 cm (24")

Reinforced, smooth-bore fuel- and oil-resistant line for reliable service.

€16.81 €22.75

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 3/8" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€22.65

DRAG SPECIALTIES Cam Cover — Chrome

Die-cast cover accepts OEM-style time covers, gasket and hardware.

€64.01 €86.66

-€3.01

DRAG SPECIALTIES Oil Line Retainer Assembly — 1/2" retainer, black

Secures oil lines from the oil tank to the engine. Replacement recommended when lines are removed. O-rings included.

€8.51 €11.52

-€22.65

DRAG SPECIALTIES Cam Cover — Cam, Chrome

Die-cast cam cover accepts OEM-style timing covers and factory gaskets and mounting hardware.

€64.01 €86.66

-€17.44

DRAG SPECIALTIES Oil Filter Line Kit — Chrome

Complete oil filter line kit with OEM-style feed and return lines, compression fittings, seals, and nuts for easy installation.

€49.31 €66.75

-€5.09

DRAG SPECIALTIES Lower Fitting Seals — 10 Pack, Black

Seals for lower fittings used on oil feed and return lines; replace worn seals to prevent leaks.

€14.40 €19.49

-€6.32

DRAG SPECIALTIES Lower Fitting Seals — 10 pack, brown

Seals for lower fittings on oil feed and return lines; replace when worn to prevent leaks.

€17.86 €24.18

-€62.97

DRAG SPECIALTIES Rocker Box Kit — I33-0103A, Chrome

Quality construction with exact dimensions for a leakproof fit. Sold each; two required per motor.

€177.97 €240.94

-€6.12

FEULING OIL PUMP CORP. Camplate Pressure Relief Spring — 6-pack

Increases pressure relief valve pop-off pressure, controls bypass oil flow; spring-only solution made in USA.

€23.81 €29.93

-€40.89

DRAG SPECIALTIES Cam Cover — Chrome

Die-cast construction with OEM-spec bushings; includes oil seal, mounting hardware and gasket.

€115.53 €156.42

-€52.41

DRAG SPECIALTIES Cam Cover — Chrome

Die-cast aluminum cam cover; bushings installed to OEM specs. Includes oil seal, mounting hardware and gasket.

€148.11 €200.52

-€4.94

DRAG SPECIALTIES Live To Ride Points Cover — Black, Chrome

Die-cast construction with a detailed eagle, banner and script; low-profile fit and easy installation.

€13.97 €18.91

-€8.15

DRAG SPECIALTIES Live To Ride Points Cover — Black, Chrome, Gold

Die-cast aluminum points cover featuring a detailed eagle with banner and script. Easy to install and ideal for vintage styling.

€23.02 €31.17

Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift, Exhaust 0.535" lift

-€85.50

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, Intake 0.525" lift,...

Bolt-in camshaft upgrade that broadens low- and mid-range torque, improves throttle response and enhances fuel economy.

€332.49 €417.99

$Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines$

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — fits 96\", 103\", 110\" engines

Broad midrange power band camshaft with a smooth lobe design. Made in the USA. Performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€5.78

DRAG SPECIALTIES Live To Ride Points Cover — Black, Chrome

Die-cast aluminum construction; detailed eagle with banner and script.

€16.34 €22.12

-€85.50

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Exhaust 255°, Intake 240°

Broad power band for modified and stock 96\", 103\" and 110\" engines.

Smooth cam-lobe design for quiet valvetrain operation.

Made in the USA; performance pushrods, lifters and clutch recommended.

€332.49 €417.99

-€1.03

DRAG SPECIALTIES Oil Drain Elbow — Black, Rubber

Directs used oil cleanly into a drain pan to minimize spills during oil changes.

€2.91 €3.94

-€32.67

FEULING OIL PUMP CORP. Camshaft Installation Kit — 2060

Complete camshaft installation kit with gaskets, bearings, fasteners, and O-rings.
Includes quick change gasket kit and hardened washers.
Precision bearings and ARP® hardware for secure assembly.
Made in the USA.

€127.03 €159.70

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine