Engine

-€62.36

ANDREWS EZ-Install Pushrods — 4-pack, aluminum

Eliminate the need to disassemble rocker boxes or remove the gas tank for cam changes and routine maintenance. Made in the U.S.A.

€242.55 €304.91

-€59.16

ANDREWS EZ-Install Pushrods — 4 Pack, Chromoly

EZ-install pushrods that eliminate removing rocker boxes or the gas tank during cam changes. Made in the U.S.A.

€230.08 €289.24

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490 in lift

Balanced street-oriented cam profile; revs to 6,500 rpm on stock hydraulic lifters. Made in the U.S.A.; solids not recommended.

€394.98 €496.54

-€50.75

ANDREWS EV23 Cam — EV23 grind, Chain, Intake 220°/Exhaust 228°

Bolt-in EV23 cam for heavier touring and high-geared bikes; works with stock springs and either carbs or EFI. Strong pull from 1500–6000 rpm. Made in the USA. Check coil bind and clearances.

€197.35 €248.10

-€24.63

ANDREWS Cam Chain Drive Sprocket — 288015

Direct replacement cam drive sprocket. Replaces the stock 34-tooth unit; includes shims. Crankshaft sprocket is 17-tooth. Made in the U.S.A.

€95.81 €120.44

-€83.75

ANDREWS Cam Set for Chain Drive — 21 Series, Intake & Exhaust

Computer-designed cam set manufactured from alloy steel billets with heat treatment. Installer must check coil bind and clearances. Made in the USA.

€325.69 €409.44

Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust 266°, Lift 0.490"

-€83.75

ANDREWS Cam Set for Chain Drive — 26 Series, Intake 226°, Exhaust...

Precision-machined cam set manufactured in the USA from alloy steel billets. Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance. Designed for chain drive applications.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — 37 Series, Intake 236°, Exhaust 240°

Precision-machined cam set for chain-drive applications. Made in the USA. Installer must verify clearances.

€325.69 €409.44

N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Gear

-€102.70

ANDREWS N2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

N2 Grind cams for dependable street performance. Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€398.82 €501.52

-€101.56

ANDREWS N4 Grind Cams — 256° duration, 0.490" lift, chain, 4-pack

Performance cam kit for use with stock hydraulic lifters. Made in the U.S.A. Stock base circle sizes retain stock pushrod compatibility.

€394.98 €496.54

J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

-€50.69

ANDREWS J Grind Cam — Intake & exhaust, 242° duration, 0.405"/0.425" lift

Increases mid-range and top-end power for street and drag bikes; bolt-in, works with solid or hydraulic lifters, maintains a smooth idle.

€197.15 €247.84

J Grind Cam — 242° duration, 0.405" lift

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

Increases mid-range and top-end power for street and drag bikes. Works with solid or hydraulic lifters. Bolt-in installation; verify coil bind and clearances. Made in USA.

€197.15 €247.84

-€50.69

ANDREWS J Grind Cam — 242° duration, 0.405" lift

More mid-range and top-end power for street and drag bikes; bolt-in with no head work; works with solid or hydraulic lifters; made in USA.

€197.15 €247.84

EV3 Cam — EV3 grind, 238° duration, 0.495" lift

-€50.75

ANDREWS EV3 Cam — EV3 grind, 238° duration, 0.495" lift

Bolt-in cam for light bikes that adds noticeable mid-range power; check coil bind and clearances before installation.

€197.35 €248.10

$EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"$

-€50.75

ANDREWS EV13 Cam — Intake 226°/0.485\", Exhaust 238°/0.495\"

Bolt-in cam for street/touring with stronger mid and upper power, compatible with stock springs, reduces oil temperature.

€197.35 €248.10

EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

-€50.75

ANDREWS EV27 Cam — 236° intake, 240° exhaust, 0.495" lift

Bolt-in street cam that delivers a broad torque band from 1,500–6,000 rpm. Uses stock springs and works with carbs or fuel injection. Made in the USA.

€197.35 €248.10

PB+ Exhaust Cams — 254° duration, 0.410" lift

-€50.10

ANDREWS PB+ Exhaust Cams — 254° duration, 0.410" lift

PB+ exhaust cams for bolt-in power on stock 1000cc engines. Use with stock P intake cams; no head work required.

€194.84 €244.94

-€4.94

CUSTOM DYNAMICS Extended Seat Bolt — 50.8 mm (2"), Silver

Makes for quick installation and removal of the seat. Bolt has a 1/4"-20 thread pitch.

€19.19 €24.13

Pushrod Kit — Fixed length, set of 4, Chromoly steel

-€30.11

ANDREWS Pushrod Kit — Fixed length, set of 4, Chromoly steel

Super-light, heavy-duty fixed-length pushrods sold as a set of four — two shorter for intake and two longer for exhaust. Rocker boxes must be removed for installation. Made in the U.S.A.

€117.08 €147.19

-€47.16

ANDREWS Adjustable Pushrods — 4 Pack

Fully adjustable replacement pushrods for H-D engines. Made in the U.S.A.

€183.41 €230.57

-€13.26

ANDREWS High-Lift Valve Springs — ANDREWS, 4-pack

High-lift valve springs providing correct spring force for performance cams in 74" and 80" motors. Max lift; requires proper valvetrain setup. Made in the United States.

€51.58 €64.84

TSM Connector Replacement Seals — 10-pack, for Harley-Davidson TSM

-€3.30

CUSTOM DYNAMICS TSM Connector Replacement Seals — 10-pack, for Harley-Davidson...

Heavy-duty replacement seals for the Harley-Davidson TSM connector to maintain a watertight connection.

€9.30 €12.60

-€102.94

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€290.97 €393.91

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine