Engine

-€9.83

EASTERN MOTORCYCLE PARTS Cam Cover Bushing — Oversize (+0.005")

High-quality OEM cam cover bushing made in the U.S.A.

€27.81 €37.64

-€52.92

S&S CYCLE 510V Camshaft — Gear

S&S bolt-in 510V camshaft proven on dyno, street and track; ideal for engines up to 96" and up to 10:1 compression. Installer must verify clearances.

€205.82 €258.74

-€213.10

S&S CYCLE 570G Camshaft Kit — 570 Series, Gear

Gear-driven camshaft kit for 88–103 CID engines (9:1–10:1). Strongest at 3200–3700 rpm; includes cams, gears, bearings and gasket. Professional installation required.

€828.74 €1,041.84

-€2.07

EASTERN MOTORCYCLE PARTS Cam Bearing Retaining Ring — Outer, Cam Gear, 10 pack

High-quality OEM replacement components for cam bearing assemblies.

€5.86 €7.93

-€2.57

EASTERN MOTORCYCLE PARTS Cam Shims — 0.005", 10-pack

Essential shims for precise cam setup. Made in the USA.

€7.27 €9.84

-€2.57

EASTERN MOTORCYCLE PARTS Cam Shims — 0.010", 2nd gear, 10-pack

Precision shims for setting up new cams. Made in the USA.

€7.27 €9.84

$Cam Gear Thrust Washers — Size 0.040\", 5-pack$

-€4.70

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — Size 0.040\", 5-pack

Absorbs axial camshaft loads; precision machined; made in the USA.

€13.25 €17.95

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

-€121.44

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Temporarily reduces crank compression for easier starts, bolt-in kit that increases power from 3200–5700 rpm; includes camshafts and hardware. Installer must verify clearances. Not for models with OEM compression releases.

€472.27 €593.71

-€112.20

S&S CYCLE 585 Easy Start Camshaft Kit — 88–124 CID, 585 Series grind

Easy-start camshaft kit for select 88–124 CID engines. Bolt-in installation; includes required hardware. Installer must verify clearances.

€436.38 €548.58

-€222.31

S&S CYCLE 551 Easy Start Camshaft Kit — Easy Start, Gear

Easy-start camshaft kit that reduces compression at startup for easier cranking; bolt-in for stock or mildly modified Touring models. Includes camshafts and installation hardware. Not for models with OEM compression releases.

€864.53 €1,086.84

-€240.61

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear type

Eases cold starts by reducing starting compression; bolt-in kit with all required hardware. Not for models with OEM compression releases.

€935.67 €1,176.28

570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°, Intake 240°

-€93.94

S&S CYCLE 570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°,...

Designed for 88"–103" CID engines (9:1–10:1). Delivers strongest power from 3200–3700 rpm. Kit includes camshafts and installation components. Installer must verify clearances; requires high lift valve springs.

€365.33 €459.27

-€112.20

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

-€57.28

S&S CYCLE H-Grind Camshaft — for 74" and 80" engines

OEM-spec hydraulic replacement camshaft; H-grind reproduction of '48–'84 Big Twin stock cams. Ideal for repair and restoration of 74" and 80" engines.

€222.75 €280.03

-€57.28

S&S CYCLE H-Grind Camshaft — Gear, fits 74" and 80" engines

OEM-spec hydraulic camshaft, a dead-on reproduction of the '48–'84 Big Twins cams; ideal for restoring 74" and 80" engines.

€222.75 €280.03

-€51.63

S&S CYCLE H-Grind Camshaft — H grind, for 74" and 80" Big Twin engines

OEM-spec hydraulic camshaft reproducing stock cams used in '48–'84 Big Twins; ideal for repair and restoration of 74" and 80" engines.

€200.80 €252.43

-€213.10

S&S CYCLE 583G Gear Drive Camshaft Kit — 583 Series grind

Reverses rear cam rotation for increased cam lift potential and improved valve timing accuracy. Professional installation required; cam bearings and gaskets must be replaced.

€828.74 €1,041.84

-€112.20

S&S CYCLE MR103 Easy Start Camshaft Kit — S&S Cycle, Chain

Bolt-in camshaft kit for 103" engines that eases starting by temporarily reducing compression, then returns to full compression. Improves midrange power (best 2500–5500 rpm). Includes camshafts and all necessary gaskets, bearings and hardware. Installer must verify coil bind and clearances.

€436.38 €548.58

635 H.O. Chain Drive Camshaft Kit — 635HO grind, Chain, Raw finish

-€86.79

S&S CYCLE 635 H.O. Chain Drive Camshaft Kit — 635HO grind, Chain, Raw...

High-lift camshaft for modified engines with 106"+ displacement and 10.0:1–11.0:1 compression.

Not a bolt-in kit; professional installation required.

Kit contains camshafts, bearings, gearcover gasket, retaining ring, o-ring, thread lock and instructions.

Installer must verify coil bind and clearances. Made in the USA.

€337.57 €424.36

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.120" spacer, 5-pack

Precision sprocket spacers to restore chain alignment. Made in the U.S.A.

€25.11 €34.00

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.130", 5-pack

Precision spacers that improve drivetrain alignment and durability. Made in the U.S.A.

€25.11 €34.00

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.140", 5-pack

Durable spacers for cam drive sprockets that maintain chain alignment and extend component life.

€25.11 €34.00

$Cam Drive Sprocket Spacers — 0.150\", 5-pack$

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.150\", 5-pack

Precision-machined spacers that ensure correct cam drive sprocket alignment and reduce wear. Made in the U.S.A.

€25.11 €34.00

-€93.94

S&S CYCLE HP103 Camshaft Kit — 249°/251° duration, 0.575" lift

Bolt-in cam kit for 103" engines; strong midrange power (3,000–6,000 rpm). Requires high-lift valve springs. Made in USA.

€365.33 €459.27

MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1 compression

-€240.61

S&S CYCLE MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1...

Bolt-in MR103 camshaft kit for 103" engines (9.7:1–10.5:1). Easier starting, full compression at speed. Includes hardware and instructions.

€935.67 €1,176.28

-€314.51

S&S CYCLE MR103 Cam Kit — Intake 226°, Exhaust 252°

Bolt-in camshaft kit for 103" engines. Increases power across the rpm range, with best results from 2500–5500 rpm. Made in the USA.

€888.84 €1,203.35

-€567.14

S&S CYCLE Gear Drive Cam Chest Kit — Easy Start, gear, kit, 310-0812

Bolt-in S&S gear-drive cam chest kit that improves lift and timing with quick-install pushrods. Made in the USA.

€2,205.55 €2,772.69

-€613.80

S&S CYCLE Gear Drive Cam Chest Kit — 585 Series, Easy Start

Complete bolt-in gear-drive cam chest kit that increases lift and optimizes cam timing. Includes S&S Quickee pushrods and premium U.S.-made components for reliable performance.

€2,386.95 €3,000.75

-€447.05

S&S CYCLE Chain Drive Cam Chest Kit — 510 Series, Chain

Bolt-in S&S camshafts, Quickie pushrods, hydraulic chain tensioner; includes oil pump, cam support plate, camshafts, tensioner and tappets.

€1,738.55 €2,185.60

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine