Engine

-€52.92
Out of Stock

S&S CYCLE 510V Camshaft — Gear

S&S bolt-in 510V camshaft proven on dyno, street and track; ideal for engines up to 96" and up to 10:1 compression. Installer must verify clearances.

€205.82 €258.74

-€213.10
Out of Stock

S&S CYCLE 570G Camshaft Kit — 570 Series, Gear

Gear-driven camshaft kit for 88–103 CID engines (9:1–10:1). Strongest at 3200–3700 rpm; includes cams, gears, bearings and gasket. Professional installation required.

€828.74 €1,041.84

-€213.10
Out of Stock

S&S CYCLE 585G Gear Drive Camshaft Kit — 585 Series grind, Gear drive

Fits 88–110 ci engines; reverses rear cam rotation to allow higher lifts. Requires inner-cover modification and professional tools. Kit includes cams, gears, bearings, gasket and instructions. Made in the USA.

€828.74 €1,041.84

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28
Out of Stock

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

-€121.44
Out of Stock

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Temporarily reduces crank compression for easier starts, bolt-in kit that increases power from 3200–5700 rpm; includes camshafts and hardware. Installer must verify clearances. Not for models with OEM compression releases.

€472.27 €593.71

-€112.20
Out of Stock

S&S CYCLE 585 Easy Start Camshaft Kit — 88–124 CID, 585 Series grind

Easy-start camshaft kit for select 88–124 CID engines. Bolt-in installation; includes required hardware. Installer must verify clearances.

€436.38 €548.58

-€222.31
Out of Stock

S&S CYCLE 551 Easy Start Camshaft Kit — Easy Start, Gear

Easy-start camshaft kit that reduces compression at startup for easier cranking; bolt-in for stock or mildly modified Touring models. Includes camshafts and installation hardware. Not for models with OEM compression releases.

€864.53 €1,086.84

-€240.61
Out of Stock

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear type

Eases cold starts by reducing starting compression; bolt-in kit with all required hardware. Not for models with OEM compression releases.

€935.67 €1,176.28

570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°, Intake 240°

-€93.94
Out of Stock

S&S CYCLE 570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°,...

Designed for 88"–103" CID engines (9:1–10:1). Delivers strongest power from 3200–3700 rpm. Kit includes camshafts and installation components. Installer must verify clearances; requires high lift valve springs.

€365.33 €459.27

-€112.20
Out of Stock

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — for 74" and 80" engines

OEM-spec hydraulic replacement camshaft; H-grind reproduction of '48–'84 Big Twin stock cams. Ideal for repair and restoration of 74" and 80" engines.

€222.75 €280.03

H-Grind Camshaft — fits 74" and 80" engines, generator and alternator fit

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — fits 74" and 80" engines, generator and...

OEM-spec hydraulic camshaft reproducing stock '48–'84 Big Twin cams; ideal for repair and restoration of 74" and 80" engines. Available for generator and alternator engines.

€222.75 €280.03

-€51.63
Out of Stock

S&S CYCLE H-Grind Camshaft — H grind, for 74" and 80" Big Twin engines

OEM-spec hydraulic camshaft reproducing stock cams used in '48–'84 Big Twins; ideal for repair and restoration of 74" and 80" engines.

€200.80 €252.43

583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583", Exhaust 262°/0.583", Gear drive

-€213.10
Out of Stock

S&S CYCLE 583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583",...

Reverses rear cam rotation to increase cam lift capability and valve timing accuracy. Includes gears, bearings, gasket and instructions. Professional installation required.

€828.74 €1,041.84

-€112.20
Out of Stock

S&S CYCLE MR103 Easy Start Camshaft Kit — S&S Cycle, Chain

Bolt-in camshaft kit for 103" engines that eases starting by temporarily reducing compression, then returns to full compression. Improves midrange power (best 2500–5500 rpm). Includes camshafts and all necessary gaskets, bearings and hardware. Installer must verify coil bind and clearances.

€436.38 €548.58

-€86.79
Out of Stock

S&S CYCLE 635 H.O. Chain Drive Camshaft Kit — Grind 635HO, Raw finish

High lift camshaft kit for modified engines 106"+; not a bolt-in kit. Includes camshafts and hardware; installer must verify clearances.

€337.57 €424.36

-€93.94
Out of Stock

S&S CYCLE HP103 Camshaft Kit — 249°/251° duration, 0.575" lift

Bolt-in cam kit for 103" engines; strong midrange power (3,000–6,000 rpm). Requires high-lift valve springs. Made in USA.

€365.33 €459.27

MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1 compression

-€240.61
Out of Stock

S&S CYCLE MR103 Easy Start Camshaft Kit — 103" engine, fits 9.7:1–10.5:1...

Bolt-in MR103 camshaft kit for 103" engines (9.7:1–10.5:1). Easier starting, full compression at speed. Includes hardware and instructions.

€935.67 €1,176.28

-€314.51
Out of Stock

S&S CYCLE MR103 Cam Kit — Intake 226°, Exhaust 252°

Bolt-in camshaft kit for 103" engines. Increases power across the rpm range, with best results from 2500–5500 rpm. Made in the USA.

€888.84 €1,203.35

-€567.14
Out of Stock

S&S CYCLE Gear Drive Cam Chest Kit — Easy Start, gear, kit, 310-0812

Bolt-in S&S gear-drive cam chest kit that improves lift and timing with quick-install pushrods. Made in the USA.

€2,205.55 €2,772.69

-€613.80
Out of Stock

S&S CYCLE Gear Drive Cam Chest Kit — 585 Series, Easy Start

Complete bolt-in gear-drive cam chest kit that increases lift and optimizes cam timing. Includes S&S Quickee pushrods and premium U.S.-made components for reliable performance.

€2,386.95 €3,000.75

-€447.05
Out of Stock

S&S CYCLE Chain Drive Cam Chest Kit — 510 Series, Chain

Bolt-in S&S camshafts, Quickie pushrods, hydraulic chain tensioner; includes oil pump, cam support plate, camshafts, tensioner and tappets.

€1,738.55 €2,185.60

-€522.95
Out of Stock

S&S CYCLE Chain Drive Cam Chest Kit — Chain, 551 Series grind

Bolt-in cam chest kit that increases lift and optimizes cam timing; includes oil pump, cam support plate, camshafts, chain tensioner and tappets. Made in USA.

€2,033.68 €2,556.63

-€469.35
Out of Stock

S&S CYCLE Chain Drive Cam Chest Kit — 551 Series grind, Easy Start, chain

Bolt-in performance camshafts, quick-install pushrods, hydraulic chain tensioner; kit includes oil pump, cam support plate, camshafts, tensioner and tappets. Made in the USA.

€1,828.82 €2,298.17

-€402.68
Out of Stock

S&S CYCLE Cam Chest Kit for M8 — Water Cooled, Gear, 475 HP

Complete matched cam chest kit for M8 engines featuring billet-aluminum oil pump and cam plate, increased oil flow, adjustable relief valve, S&S pushrods and tappets, and all gaskets, bearings, and hardware for a full installation. Made in the USA.

€1,569.13 €1,971.81

-€594.98
Out of Stock

S&S CYCLE Cam Chest Kit for M8 — Gear, oil-cooled, 465 Performance

Complete cam chest kit for M8 with precision-machined billet components, adjustable pressure relief valve, debris-capturing magnet, S&S pushrods and premium tappets. Includes drive gears, gaskets, bearings, and all hardware for installation.

€1,681.44 €2,276.42

-€407.88
Out of Stock

S&S CYCLE Cam Chest Kit for M8 — Water-cooled, gloss black pushrod tubes

Complete matched cam chest kit that improves cam timing accuracy, increases oil flow and enhances tappet stability for M8 engines.

€1,586.22 €1,994.10

Cam Chest Kit for M8 — Water Cooled, 465 Performance

-€325.12
Out of Stock

S&S CYCLE Cam Chest Kit for M8 — Water Cooled, 465 Performance

Complete cam chest kit for M8 with billet aluminum pump/cam plate, enhanced oil flow, debris protection, and S&S valve-train components.

€1,266.82 €1,591.94

Cam Chest Kit for M8 — Water Cooled, Model 475 HP

-€380.55
Out of Stock

S&S CYCLE Cam Chest Kit for M8 — Water Cooled, Model 475 HP

Complete cam chest kit for M8 with billet oil pump/cam plate, blue anodized finish, serviceable plugs, debris screens, magnet, adjustable relief valve, S&S tensioner, pushrods, tappets and hardware included.

€1,479.89 €1,860.44

Cam Chest Kit for M8 — water-cooled, chain, gloss black pushrod tubes

-€390.37
Out of Stock

S&S CYCLE Cam Chest Kit for M8 — water-cooled, chain, gloss black...

Complete cam chest kit for M8 with billet oil pump/cam plate, pushrods, tappets and cuffs; includes gaskets and hardware.

€1,518.08 €1,908.45

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine