Engine

Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust 240°/0.510in

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 31 Series, Intake 236°/0.510in, Exhaust...

Computer-aided designed alloy-steel cams made in the USA. Four-gear set required for installation; installer must verify coil bind and clearances.

€372.91 €468.80

N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482", 240°/234° duration, 4 Pack

-€101.56
Out of Stock

ANDREWS N3 Grind Cams — Intake lift 0.465", Exhaust lift 0.482",...

Bolt-in N3 grind cam kit for 05–16 883/1200 engines. Runs to 6500 rpm on stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Conversion Chain Driven Cam — N Series, 55 Series grind, Chain Conversion

-€83.72
Out of Stock

ANDREWS Conversion Chain Driven Cam — N Series, 55 Series grind, Chain...

Converts '99-'06 Twin Cam engines (except '06 Dyna Glide) to roller-style cam chains and hydraulic adjusters. Requires additional '07-'17 components; a list is included. Made in the USA.

€325.59 €409.31

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€51.96
Out of Stock

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64
Out of Stock

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

-€126.24
Out of Stock

CUSTOM CYCLE ENGINEERING Finned Rocker Covers — Polished, pair

Original Randy Smith design; stops Panhead rocker box oil seepage; supplied as a matched left/right set; made in the USA.

€490.94 €617.18

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€101.89
Out of Stock

CUSTOM CYCLE ENGINEERING Finned Rocker Covers — Natural finish, pair

Original Randy Smith design that eliminates Panhead rocker box oil seepage. Sold in pairs. Made in the USA.

€396.19 €498.08

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

-€105.86
Out of Stock

CUSTOM CYCLE ENGINEERING Evo Finned Rocker Covers — Aluminum, Polished, Pair

Original Randy Smith finned top covers; machined undersides for high‑lift cam clearance, polished finish, includes stainless Allen screws and washers.

€411.70 €517.56

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

Oil Cooler Fan — THUNDERMAX EA7000, Black

-€66.20
Out of Stock

THUNDERMAX Oil Cooler Fan — THUNDERMAX EA7000, Black

Reduces oil temperatures using engine temperature and vehicle speed. Quick 15-minute install; no oil cooler removal. Plug-n-play on M8 models with compatible ECM. Made in the USA.

€257.47 €323.67

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€53.92
Out of Stock

ANDREWS Cams for M-Eight — 107", 114", stock compression

Bolt-in cam for M-Eight 107" and 114" engines; maintains stock compression and improves midrange torque.

€209.67 €263.59

-€14.77
Out of Stock

ANDREWS Cam Sprocket — 17T

Precision cam sprocket built for reliable valve timing and long service life.

€57.44 €72.21

shop by category

Engine

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine