Engine (8)

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Billet aluminum, black

Protects the oil sending unit sensor and connector; precision-machined for a snug, low-profile fit. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Black

Covers and protects the oil sending unit sensor and connector. Easy installation with a smooth, horizontal finish.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Black

Protects and conceals the oil sensor and connector; precision-machined for a secure fit. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Polished Silver, Billet Aluminum

Provides neat coverage for the oil sending unit sensor and connector. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Polished

Fits over the oil sending unit sensor and connector. Made from billet aluminum. Made in the USA.

€48.43 €60.89

-€12.46
Out of Stock

NAMZ Oil Sending Unit Cover — Polished silver

Covers the oil sending unit sensor and connector; precision-machined for a consistent fit; made in the USA.

€48.43 €60.89

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84
Out of Stock

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L., Oversize (+0.002")

-€2.46
Out of Stock

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 1.065" O.L.,...

Made to exact tolerances for reliable OE-style fit and wear. Made in the USA. Oil hole(s) not included; must be drilled after installation.

€6.93 €9.39

Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L., Oversize (+0.002")

-€2.71
Out of Stock

KIBBLEWHITE Wrist Pin Bushing — 0.899" O.D. x 0.788" I.D. x 0.945" O.L.,...

Replacement wrist pin bushing made to exact tolerances. Made in the USA. Oil holes not included; drill after installation.

€7.69 €10.40

Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L., C630 bronze

-€8.79
Out of Stock

KIBBLEWHITE Wrist Pin Bushing — 0.897" O.D. x 0.788" I.D. x 1.065" O.L.,...

Made to exact tolerances to meet or exceed OE-style fitment; oil holes must be drilled after installation. Made in the USA.

€24.86 €33.65

-€104.52
Out of Stock

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€39.85
Out of Stock

KIBBLEWHITE Racing Valve Spring Kit — 0.600" lift, 347 lb open, 148 lb seat

High-performance valve spring kit engineered for racing applications. Progressive springs and a complete set for one engine; made in the USA.

€144.74 €184.59

Shouldered C630 Bronze Valve Guide — ID 0.3098 in, L 2.100 in, OD 0.5620 in

-€8.35
Out of Stock

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — ID 0.3098 in, L 2.100 in,...

Precision-machined nickel-bronze valve guide offering high wear resistance and excellent heat conductivity. Accepts special seals (sold separately).

€23.64 €31.99

Shouldered C630 Bronze Valve Guide — Oversize (+0.001"), 0.3098" ID, 2.100" L

-€7.05
Out of Stock

KIBBLEWHITE Shouldered C630 Bronze Valve Guide — Oversize (+0.001"),...

Precision-machined shouldered valve guide in nickel bronze for superior wear resistance and heat conductivity. Sold each.

€19.98 €27.03

Powdered Metal Valve Seats — 1.535" ID, 0.453" seat height, 1.969" OD

-€3.62
Out of Stock

KIBBLEWHITE Powdered Metal Valve Seats — 1.535" ID, 0.453" seat height,...

High-density powdered metal valve seats offering exceptional wear resistance and thermal stability. Made in the USA. Typically supplied as two intake and two exhaust seats per application.

€10.23 €13.85

Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007", Height 0.450"

-€4.11
Out of Stock

KIBBLEWHITE Powdered Metal Valve Seats — Intake, ID 1.562", OD 2.007",...

High-density powdered metal valve seats engineered for wear resistance and thermal stability. Track- and street-tested for multi-valve, high-RPM applications. Standard set uses two intake and two exhaust seats.

€11.61 €15.72

-€9.31
Out of Stock

KIBBLEWHITE Nitrided Valve — 1.715" head, 0.3100" stem, 4.480" length

One-piece, stellite-tipped nitrided valve with surface buildup to reduce wear and friction; corrosion-resistant and compatible with leaded and unleaded fuels. Made in the USA.

€26.28 €35.59

-€101.56
Out of Stock

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420" length

-€6.08
Out of Stock

KIBBLEWHITE Nitrided Valve — Oversize, 1.900" head, 0.3100" stem, 4.420"...

Special nitrided one-piece, stellite-tipped valve providing improved wear resistance, reduced friction, excellent flow characteristics and corrosion resistance. Made in the USA.

€20.66 €26.74

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

-€9.07
Out of Stock

KIBBLEWHITE C630 Valve Guides — 1.770" L, 0.5650" OD, 0.3085" ID

Precision-machined C63000 bronze valve guides with tapered nose for improved flow; OEM-style fitment; top-hat seals sold separately; made in USA.

€25.65 €34.72

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine