Engine (72)

Frame Clamp — For 1-1/4" frame tubing, Black

-€1.93
Out of Stock

JAGG OIL COOLERS Frame Clamp — For 1-1/4" frame tubing, Black

Secure, vibration-isolating clamp for mounting universal and custom oil coolers and accessories on tubular frames. Made in the USA.

€7.51 €9.44

-€130.32
Out of Stock

S&S CYCLE Cam Cover Kit — Silver, Natural

Precision-machined castings; inner functional cover with decorative bolt-on outer cover; internal breather passage vents the crankcase; accepts points or electronic ignition systems; made in the U.S.A.

€368.39 €498.71

$Frame Clamp — For 1-3/8\" frame tubing, Black$

-€1.98
Out of Stock

JAGG OIL COOLERS Frame Clamp — For 1-3/8\" frame tubing, Black

Precision clamp for mounting oil coolers and accessories on tubular frames. Isolates vibration and built in the USA for reliable performance.

€7.70 €9.68

-€18.14
Out of Stock

FEULING OIL PUMP CORP. Gear Cross Logo Points Cover — Black

Precision machined 6061 billet aluminum points cover that bolts to the factory cam cover; includes stainless button head fasteners.

€70.51 €88.65

Frame Clamp — 1-1/2 in frame tubing, black

-€1.98
Out of Stock

JAGG OIL COOLERS Frame Clamp — 1-1/2 in frame tubing, black

Secures universal and custom oil coolers to tubular frames while isolating vibration. Made in the USA.

€7.70 €9.68

-€5.41
Out of Stock

DRAG SPECIALTIES Split Skull Points Cover — Chrome

Distinctive split skull cover that protects ignition components and complements matching pieces. Easy installation.

€15.30 €20.71

-€13.52
Out of Stock

JAGG OIL COOLERS Braided Oil Hose — 305 cm (10'), for 3/8" frame tube, black

Braided outer jacket for structure and a racy look, with internal steel wire reinforcement for added strength.

€52.63 €66.15

-€5.90
Out of Stock

DRAG SPECIALTIES Split Skull Points Cover — Black

Protective Split Skull cover for ignition points; coordinates with other Split Skull accessories.

€16.68 €22.58

Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in, 10.3:1

-€121.37
Out of Stock

S&S CYCLE Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in,...

Forged big-bore piston kit compatible with stock rods; cylinders may require boring for proper fit. Precision-made for correct clearances.

€472.00 €593.37

Braided Oil Hose — 305 cm (10'), for 3/8" frame tube, stainless steel

-€13.18
Out of Stock

JAGG OIL COOLERS Braided Oil Hose — 305 cm (10'), for 3/8" frame tube,...

Braided outer jacket and internal steel wire reinforcement provide durable, high-performance oil routing and kink resistance.

€51.30 €64.48

-€5.68
Out of Stock

DRAG SPECIALTIES Split Skull Points Cover — Chrome

Distinctive Split Skull styling in a direct-fit points cover replacement.

€16.07 €21.75

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8", Compression 10.4:1, Displacement 107"

-€121.37
Out of Stock

S&S CYCLE Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8",...

Durable forged pistons for big bore builds. Compatible with stock rods with tapered wristpin ends. Cylinders may be bored to fit; machine to nominal diameter for correct clearance.

€472.00 €593.37

Split Skull Points Cover — Black, die-cast

-€5.90
Out of Stock

DRAG SPECIALTIES Split Skull Points Cover — Black, die-cast

Distinctive split skull design replaces the standard points cover for a custom look and straightforward installation.

€16.68 €22.58

-€28.60
Out of Stock

JAGG OIL COOLERS Oil Filter Adapter — Black anodized, billet aluminum

Installs between the oil filter landing and filter to provide full-time oil flow to an oil cooler. HyperFlow design, NPT port, ProLine swivel fittings for easy plumbing.

€111.24 €139.84

-€5.42
Out of Stock

DRAG SPECIALTIES Split Skull Points Cover — Chrome

Bold split-skull styling, direct-fit replacement for stock points covers, easy installation.

€15.32 €20.74

Cylinder Head Gasket — 1.02 mm, stock bore, MLS (multi-layer steel)

-€12.37
Out of Stock

COMETIC Cylinder Head Gasket — 1.02 mm, stock bore, MLS (multi-layer...

High-quality cylinder head gasket offering long-term reliability and fuel-resistant construction. Made in the USA.

€35.01 €47.38

-€3.45
Out of Stock

JAGG OIL COOLERS Viscosity Regulated Flow Actuator Kit — VRF, Black

Replaces the thermostatic actuator element with a VRF plug that routes oil to bypass the cooler during cold starts and sends hot, filtered oil to the cooler at operating temperature. Kit includes plug, spring, button head, O-ring and gasket. Made in the USA.

€13.47 €16.92

Cylinder Head Gasket — Bore 4.017" , Thickness 0.76 mm (0.030"), MLS

-€23.07
Out of Stock

COMETIC Cylinder Head Gasket — Bore 4.017" , Thickness 0.76 mm...

High-quality cylinder head gasket built for long-term reliability. Fuel-resistant materials and reinforced layered construction provide a durable seal. Made in the USA.

€65.25 €88.32

Out of Stock

ANDREWS Cam Drive Gear

High-quality heat-treated gears made in the U.S.A. for Harley-Davidson motorcycles.

€40.89

-€45.41
Out of Stock

DRAG SPECIALTIES Cam Cover — Black, gloss, 35-0025GB

Die-cast aluminum cam cover with installed bushings; includes oil seal, mounting hardware and gasket.

€128.32 €173.73

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€49.09
Out of Stock

DRAG SPECIALTIES Cam Cover — 35-0015GB, Aluminum, Black gloss

Die-cast aluminum cam cover with bushings installed to OEM specs; includes oil seal, mounting hardware and gasket.

€138.74 €187.83

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€11.51
Out of Stock

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

Offset Oil Filter Adapter — Oil Filter, Black

-€36.48
Out of Stock

JAGG OIL COOLERS Offset Oil Filter Adapter — Oil Filter, Black

Automatic thermostatic bypass valve speeds warm-up; installs between engine and filter to accept an auxiliary oil cooler. Made in the USA.

€141.88 €178.36

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

-€96.53
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

Precision turbulators and mini-louvered fins maximize heat transfer to keep your engine cooler. Multipass flow and included installation components make for reliable performance and straightforward fitment. Made in the USA.

€375.41 €471.94

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine