Engine (7)

OE+ Oil Pump/Camplate Kit — Oil pump, cam support, chain drive

-€122.14

FEULING OIL PUMP CORP. OE+ Oil Pump/Camplate Kit — Oil pump, cam support, chain drive

Billet OE+ oil pump and matched camplate kit — pre-set 50–60 psi relief, increased lubrication and scavenging; includes retainer plate and hardware. Made in the USA.

€474.99 €597.13

High Pressure / High Volume Oil Pump for M-Eight — 2.250" Chrome Moly gerotor gears, natural finish

-€97.88

FEULING OIL PUMP CORP. High Pressure / High Volume Oil Pump for M-Eight — 2.250"...

Improves oil flow and pressure for M-Eight engines; increases scavenge and bearing oil volume, bench-tested to spec.

€380.61 €478.49

-€231.75

FEULING OIL PUMP CORP. HP+® Oil System Packs for M8 — Kit, Red

High-flow oil system kit for M8 engines — increases oil flow, pressure and scavenge; includes pump, high-flow camplate, hydraulic lifters and installation hardware.

€901.25 €1,133.00

-€97.88

FEULING OIL PUMP CORP. High Pressure / High Volume Oil Pump for M-Eight — HP+®, Natural

High-flow 2.250" chrome moly gerotor gears for increased oil volume
Precision-machined relief valve; bench tested to seat at 30 psi, pop-off 55–60 psi
42% more scavenge volume and 68% more oil to bearings versus stock
Magnet protection and corrected passages to reduce wet sumping and blow-by
Requires matching high-flow cam plate (part #0932-0192) for optimized scavenge

€380.61 €478.49

Race Series® Oil Pump — Red anodized, 7075 billet aluminum

-€114.49

FEULING OIL PUMP CORP. Race Series® Oil Pump — Red anodized, 7075 billet aluminum

High-flow oil pump for M-Eight engines that increases oil and scavenge volume, improves pressure control, lowers oil and engine temperatures, and requires the High Flow cam plate (part #0932-0192). Made in the USA.

€445.24 €559.73

-€278.38

FEULING OIL PUMP CORP. Race Series® Oil System Packs For M8 — Red

Precision-machined oil system packs for M8 engines that increase oil flow, scavenge volume and pressure while reducing temperatures and wet sumping. Includes pump, lifters, high-flow camplate and installation kit.

€1,082.58 €1,360.96

Pressure Relief Valve, Springs and Plunger — Oil pump, P/N 8026

-€2.95

FEULING OIL PUMP CORP. Pressure Relief Valve, Springs and Plunger — Oil pump, P/N 8026

Replacement spring and plunger assembly for oil pump pressure relief valve — increases pop‑off psi and restores proper bypass control. Bench‑test with PART #3801-0071.

€9.32 €12.27

-€6.12

FEULING OIL PUMP CORP. Pressure Relief Valve, Springs and Plunger — Oil pump, 6-pack

Precision-machined plunger and spring set to restore and control pressure relief pop-off. Increases pop-off psi; bench test with PART #3801-0071. Made in the USA.

€23.81 €29.93

OE+ Oiling System/Cam Chest Freshen Up Kit — High Volume, '07-'17 Chain Drive

-€376.80

FEULING OIL PUMP CORP. OE+ Oiling System/Cam Chest Freshen Up Kit — High Volume,...

Freshen the cam chest and oiling passages on late-model Twin Cam engines. Complete set with pump, camplate, lifters, sprockets, chains, bearings, hardware and gaskets.

€1,064.85 €1,441.65

Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and Keihin CV, Silver

-€17.15

TRASK Mikuni Air Cleaner Adapter — fits HSR 42/45, S&S E/G and...

Mounts S&S E/G or Keihin CV style air cleaners to Mikuni HSR 42/45 carburetors. Made in the USA.

€66.68 €83.83

-€85.27

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — FEULING PARTS 3000

Complete kit with eight cylinder studs and eight head bolts, plus moly assembly lubricant and thread sealant; precision J-formed threads reduce galling and help prevent gasket failure.

€331.60 €416.87

Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

-€69.56

FEULING OIL PUMP CORP. Cylinder Stud and Head Bolt Kit — Chromoly steel, black, kit

Complete kit with eight heat-treated 8740 chromoly studs, eight polished head bolts, moly lubricant, and thread sealant; precision J-formed threads prevent galling.

€270.56 €340.12

-€30.70

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel

Precision J-form cylinder stud kit with eight studs, moly assembly lubricant, and thread sealant. Stock replacement and reusable; manufactured by ARP® in the USA.

€119.36 €150.06

-€28.46

FEULING OIL PUMP CORP. Cylinder Stud Kit — Chromoly steel, Chrome finish

High‑strength cylinder stud kit with precision J‑form threads. Includes eight studs, moly assembly lubricant and thread sealant; reusable and made in the USA.

€110.67 €139.13

-€33.91

FEULING OIL PUMP CORP. Rocker Arm Shaft Stud & Nut Kit — Black

Stud and nut kit that reinforces rocker arm shaft standoffs to help prevent cylinder head cracking.

€131.90 €165.81

-€8.24

COMP CAMS V-Thunder™ Tappet Assembly — COMP CAMS Hy-Rev, Hydraulic, 7410-1

Oil-metering hydraulic roller lifter with hardened high-carbon/chromium rollers, carbo-nitrided pushrod seat, and 100% testing; HY-REV™ and PRO-MAGNUM™ variants.

€23.31 €31.55

-€67.65
New

FEULING PARTS FEULING PARTS LIFTERS RS OVERSIZED OD 0.843-

LIFTERS RS OVERSIZED OD 0.843-

€263.59 €331.24

-€22.54
New

FEULING PARTS FEULING PARTS SHIMS ROCKER SHAFT .003 24PK M

SHIMS ROCKER SHAFT .003 24PK M

€87.81 €110.35

-€22.54
New

FEULING PARTS Rocker Shaft Shims — 24 pack

Reduces rocker arm end play to cut noise and restore proper rocker arm oil psi. Professional installation recommended. Made in the USA.

€87.81 €110.35

-€22.54
New

FEULING PARTS Rocker Shaft Shims — Rocker Shaft, 24-pack

Reduces rocker arm end play and engine noise. Recommended side clearance: 0.0035" - 0.005". Helps limit wear on M8 rocker standoffs. Professional installation required. Made in the USA.

€87.81 €110.35

High Flow Camplate — 7075 billet aluminum, Chain drive

-€92.08
Out of Stock

FEULING OIL PUMP CORP. High Flow Camplate — 7075 billet aluminum, Chain drive

Precision-machined camplate that increases oil flow and volume, lowers engine and oil temperatures, and is pressure tested to 55-60 psi. Includes bearing and retainer hardware. For use with Feuling® oil pumps.

€358.14 €450.22

Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

-€1,595.33
Out of Stock

TRASK Tornado Turbo Performance Kit — 107", 114", 117" M-Eight, Black

Bolt-on kit adds 40–50% more power to stock 107", 114", 117" M-Eight motors. Includes larger injectors, spark plugs, boost gauge with mount, oil lines, custom cam cover and Thundermax tune files. Requires Thundermax ECM (sold separately). Does not fit Twin Cooled models or models with non-removable fairing lowers. For offroad use only.

€6,204.07 €7,799.40

Tornado Turbo Performance Kit — Black, TRASK

-€1,595.33
Out of Stock

TRASK Tornado Turbo Performance Kit — Black, TRASK

Bolt-on turbo kit that adds 40%–50% more power to stock 107", 114" and 117" M-Eight motors; includes injectors, tune files and all install hardware. Requires Thundermax ECM; offroad use only.

€6,204.07 €7,799.40

Reaper® 525 Cam — 525 Series grind, 236° exhaust duration, 226° intake duration

-€119.78
Out of Stock

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, 236° exhaust duration,...

Bolt-in camshaft upgrade for stock 88" and 96" engines; widens the torque band, improves throttle response and fuel economy.

€338.55 €458.33

Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift 0.574"

-€141.31
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design for quiet valvetrain. Made in USA. Performance pushrods, lifters and clutch recommended.

€399.38 €540.69

Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°, Exhaust Lift 0.630"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°,...

High-performance camshaft that preserves low-end rideability while delivering strong mid and top end power. Requires supporting upgrades and professional tuning.

€366.15 €460.30

Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°, Lift 0.630", Chain, Pair

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°,...

Aggressive performance cam that preserves low‑end while delivering strong mid and top end power; requires intake/exhaust tuning and valvetrain upgrades.

€366.15 €460.30

-€27.33
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — FEULING PARTS, 2065, Standard

Complete camshaft installation kit with bearings, ARP bolts, gaskets and seals. Made in the U.S.A.

€106.26 €133.59

-€2.53
Out of Stock

FEULING OIL PUMP CORP. Bearing Retainer Plate — Cam, Steel

Cam bearing retainer plate and hardware. Recommended for use with all Twin Cam model cam plates. Made in the U.S.A.

€9.88 €12.41

-€7.77
Out of Stock

FEULING OIL PUMP CORP. Camplate Chain Tensioner Pins — FEULING PARTS, 8003, Pair

Made from heat-treated chromoly steel. Ensures proper press fit when changing Twin Cam chain drive cam plates or replacing chain drive tensioners. Made in the U.S.A.

€30.23 €38.00

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine