Engine (7)

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

-€5.26

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.85 €20.11

-€51.63

S&S CYCLE H-Grind Camshaft — H grind, for 74" and 80" Big Twin engines

OEM-spec hydraulic camshaft reproducing stock cams used in '48–'84 Big Twins; ideal for repair and restoration of 74" and 80" engines.

€200.80 €252.43

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

-€51.63

S&S CYCLE H-Grind Camshaft — H grind, fits 74" and 80" Big Twin engines

OEM-spec hydraulic replacement camshaft; faithful reproduction of stock '48–'84 Big Twin cams. Ideal for repair and restoration of 74" and 80" engines; available for generator and alternator applications.

€200.80 €252.43

-€192.09

S&S CYCLE 551G Gear Drive Camshaft Kit — 551 Series grind

Bolt-in cam set for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque and timing accuracy; professional installation required.

€747.05 €939.14

-€84.68

S&S CYCLE 551C Chain Drive Camshaft Kit — Chain, 551 Series

Bolt-in cam set for 96–106 CID engines; improves low and midrange torque. Fits models with hydraulic tensioner chain drive.

€329.33 €414.01

-€84.68

S&S CYCLE 583C Chain Drive Camshaft Kit — 583 Series grind

Great cam for Softail and Dyna; strong low-end torque and horsepower. Best from 1500–5000 rpm. Installer must check coil bind and clearances. Not for compression ratios > 10.1:1.

€329.33 €414.01

-€10.69

DRAG SPECIALTIES Stainless Steel Braided Hose — 5/16" ID, 6' length

Suitable for oil and gas applications. Not for use with fuels over 10% alcohol.

€30.23 €40.92

Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm), Fuel/Oil

-€11.24

DRAG SPECIALTIES Stainless Steel Braided Hose — 3/8" (9.5 mm) ID, 6' (183 cm),...

For oil and gas applications. Do not use with fuel over 10% alcohol.

€31.76 €43.00

Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose, Fuel/Oil

-€9.74

DRAG SPECIALTIES Black Braided Hose — 7.9 mm (5/16"), 183 cm (6'), -5 hose,...

Nylon braided hose with abrasion-resistant covering; suitable for fuel and oil applications.

€27.55 €37.29

Black Braided Hose — 9.5 mm (3/8"), 183 cm (6')

-€10.60

DRAG SPECIALTIES Black Braided Hose — 9.5 mm (3/8"), 183 cm (6')

Black braided hose with a durable covering; suitable for fuel or oil applications.

€29.94 €40.54

Big Bore Piston Kit — +0.010 in oversize, 4.250 in bore, 4.375 in stroke, 124 cu in displacement

-€149.95

S&S CYCLE Big Bore Piston Kit — +0.010 in oversize, 4.250 in bore, 4.375...

Complete piston kit with pistons, rings, wristpins, and clips. Compression ratios are approximate.

€326.56 €476.51

-€135.98

S&S CYCLE Piston Kit Big Bore 4.250" for M8 Models — 4.250" bore, 128 cu in

Forged aluminum piston kit engineered for durability and reliable engine performance. Ideal for rebuilds and upgrades.

€528.83 €664.81

-€7.24

DRAG SPECIALTIES Black Braided Hose — 1/2" ID, 3' length

Durable braided hose suitable for fuel and oil applications. Sold each.

€20.45 €27.69

-€109.47

S&S CYCLE HP103 Easy Start Camshaft Kit — Grind HP103, Chain

Easy-start camshaft kit for 103" engines; bolt-in design, high-rpm power band, includes hardware. Not for models with OEM compression releases.

€425.73 €535.20

Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

-€5.79

DRAG SPECIALTIES Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

Compact clamps for small-diameter hoses and tubing. Designed for use on oil and gas lines up to 3/8" in diameter. Made in the USA.

€16.36 €22.15

-€119.17

S&S CYCLE 640 Easy Start Camshaft Kit — Chain, S&S CYCLE 330-0331

Reduces crank compression for easier starts, then restores full compression for normal running. Fits 95", 96", 103" and 110" engines with 10.5:1–11.5:1 compression; requires high-lift springs and adjustable pushrods. Not for models with OEM compression releases.

€376.07 €495.24

-€5.78

DRAG SPECIALTIES Chrome Rocker Oil Lines — Chrome

Overhead oil line set with crossover and crankcase-to-rocker box line; includes fittings and seals.

€16.34 €22.12

-€216.89

S&S CYCLE MR103 Easy Start Camshaft kit — Gear type

Bolt-in camshaft kit for easier starting on 103" engines; restores full compression once running. Includes cams and hardware; installer must verify clearances.

€843.44 €1,060.33

-€5.88

DRAG SPECIALTIES Chrome Rocker Oil Lines — Rocker set

Overhead oil line set includes crossover and crankcase-to-rocker box lines; fittings and seals included and available separately.

€16.60 €22.48

-€200.13

S&S CYCLE 635 H.O. Gear Drive Camshaft Kit — Gear drive, Raw finish

High‑lift camshaft kit for modified engines 106"+ displacement; increases accuracy by removing chain lash; requires professional installation and press.

€631.54 €831.67

$V-Twin Top End Gasket Kits — Bore 3.500\", 1340 cc, '92-'99 EVO Big Twin$

-€23.14

COMETIC V-Twin Top End Gasket Kits — Bore 3.500\", 1340 cc, '92-'99...

EST top-end gasket kit with embossed stainless steel head, base, and rocker gaskets and proprietary rubber coating. Includes all gaskets, seals, and O-rings needed to rebuild the top end. Made in the USA.

€65.48 €88.62

Extreme Sealing Technology Complete Gasket Kit — '91-'03 XL 1200, 3.1875" bore, 1.02 mm (0.040")

-€42.84

COMETIC Extreme Sealing Technology Complete Gasket Kit — '91-'03 XL...

Complete gasket kit with MLS head gaskets, Steel Viton®-coated base gaskets, Blue Viton valve stem seals, AFM exhaust gaskets; made in the USA.

€121.22 €164.06

$Primary Gasket Kit — 1.52 mm (0.060\") MLS$

-€10.08

COMETIC Primary Gasket Kit — 1.52 mm (0.060\") MLS

Complete primary gasket kit with AFM gaskets, seals and O-rings for inner and outer primary. No gasket sealer required.

€28.52 €38.60

Replacement Ring Set for S&S Pistons — Bore 3.4375", Piston +0.030"

-€14.81

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.4375", Piston...

Replacement ring set for S&S pistons. Includes rings for two pistons. Made in the USA.

€57.68 €72.49

V-Twin Top End Gasket Kits — 3.750" bore, 88"/96" displacement, '05-'16 Twin Cam

-€30.66

COMETIC V-Twin Top End Gasket Kits — 3.750" bore, 88"/96"...

Complete EST top-end gasket kit with embossed stainless gaskets and proprietary rubber covering; includes all seals and O-rings needed for a top-end rebuild.

€86.73 €117.39

Replacement Ring Set for S&S Pistons — Bore 3.4375", +0.050" piston, Domed, Set

-€14.27

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.4375", +0.050"...

Replacement ring set for S&S pistons. Includes rings for two pistons. Made in the USA.

€45.03 €59.30

V-Twin Top End Gasket Kits — 3.875" bore, 103"/95" displacement, 1.02 mm thickness

-€30.66

COMETIC V-Twin Top End Gasket Kits — 3.875" bore, 103"/95"...

Complete EST top end gasket kit with embossed stainless steel head, base, and rocker gaskets, proprietary rubber sealing, and all seals and O-rings required to rebuild the top end. Made in USA.

€86.73 €117.39

-€26.83

COMETIC Primary Gasket Kit

Complete kit of gaskets, seals and O-rings for inner and outer primary; high heat resistance and strong torque retention.

€75.90 €102.73

Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit — S&S CYCLE Kit, PN 106-6027

-€55.80

S&S CYCLE Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit...

Quality camshaft kit for 1954–1984 Big Twin models; higher lift and improved valve timing. Quiet hydraulic operation when used with hydraulic conversion kits.

€162.43 €218.23

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company