Engine (6)

-€132.18

COMP CAMS Mega 8 Camshaft — 246A, Bolt-In

Performance camshaft series using Comp Cams technology and Endurance Ramps; billet steel construction, reduced valve train noise, made in the USA.

€282.48 €414.66

Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model 240C

-€124.12

COMP CAMS Mega 8 Camshaft — High-lift, Intake 240°, Exhaust 250°, Model...

Performance cam series with Endurance Ramps, reduced valve train noise, billet steel construction, made in USA.

€265.34 €389.46

Deluxe Engine Bolt Cover Kit — Chrome, Silver, Fits Harley-Davidson engines

-€26.52

DRAG SPECIALTIES Deluxe Engine Bolt Cover Kit — Chrome, Silver, Fits...

Covers raw OEM bolt heads on Harley-Davidson® model engines. Kit includes motor, transmission, primary and select chassis bolt covers. Easy to install; fasten with silicone (sold separately).

€74.94 €101.46

618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°, Exhaust lift 0.618", Intake lift 0.608"

-€82.27
New

FEULING PARTS 618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°,...

Race-oriented camshaft for high-performance engines. Requires supporting high-lift valvetrain, ported heads and intake; check clearances and match Race Series oiling system.

€320.52 €402.79

-€67.88
New

FEULING PARTS 487 Series Chain Drvie Camshaft — Chain Drive, Reaper

Aggressive bolt-in cam for 4.25" stroke, 114"–117" engines. Wide powerband; responds well to increased bore, compression, exhaust and intake changes. Specs measured at 0.050" with a 1.61 rocker ratio. Manufacturer advises against tuning beyond stock emissions.

€264.49 €332.37

-€59.01
New

FEULING PARTS Inner Cam Bearing — 20 Pack

Heavy-duty full-complement component designed for performance engines. Manufactured by Koyo® Torrington®. Made in the USA.

€229.52 €288.53

-€78.43
New

FEULING PARTS Inner Cam Bearing — 20-Pack, FEULING PARTS 2084

Heavy-duty full-complement bearing manufactured by Koyo Torrington in the USA for high-performance engine use.

€305.07 €383.50

-€13.31

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Engine, Black

Covers OEM bolt heads on engine, transmission and primary
Standard and deluxe kit options
Individual covers available
Easy installation with included instructions

€37.64 €50.95

-€6.76
New

FEULING PARTS FEULING PARTS PAD TENSIONER REPLACEMENT M8

PAD TENSIONER REPLACEMENT M8

€26.32 €33.08

-€45.08
New

FEULING PARTS Hydraulic Camchain Tensioner Kit — FEULING PARTS, P/N 8084

Complete kit to install or replace hydraulic camchain tensioners on stock M8 models. Works with factory, SE and S&S oiling systems. Made in the USA.

€175.68 €220.76

Endurance Beehive® Valve Springs with Titanium Retainers — 0.650" spring lift, fits 05-17 Twin Cam

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers —...

Endurance Beehive® valve spring kit with titanium retainers; direct bolt-in up to .574" (84–04 Big Twin, 86–03 XL) and up to .650" (05–17 Twin Cam).

€295.24 €371.16

-€12.21

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Black

Covers raw OEM bolt heads on engine, transmission and primary. Standard and deluxe kit options available; individual covers sold separately. Fasten with silicone (sold separately).

€34.50 €46.71

Endurance Beehive® Valve Springs with Titanium Retainers — 0.650" spring lift, 7.00 mm stem diameter

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers —...

Premium Endurance Beehive® valve spring kit with lightweight titanium retainers, machined seats, shims, locks and Viton® seals. Direct bolt-in replacement for many V-Twin applications.

€295.24 €371.16

-€6.00

FEULING OIL PUMP CORP. Sandwich Adapter Rebuild Kit — 1/8" NPT ports, oil filter kit

Replacement gasket, O‑ring and Allen hardware for sandwich adapter rebuilds; fits offset adapters with 1/8" NPT ports; made in the USA.

€23.34 €29.34

-€12.98

DRAG SPECIALTIES Standard Engine Bolt Cover Kit — Chrome, Silver

Covers raw OEM bolt heads on engine, transmission and primary for a clean, finished look. Deluxe and individual options available. Easy installation with included instructions.

€36.68 €49.66

Viton® Valve Guide Seals — 5/16" stem diameter, 4 Pack

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16" stem diameter, 4 Pack

High-quality Viton® valve guide seals designed for high engine temperatures with a spring-loaded wiper to reduce excess oil on valve stems. Made in the USA.

€11.49 €14.44

$Viton® Valve Guide Seals — 5/16\", 4 pack$

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16\", 4 pack

High-quality seals designed to handle high engine temperatures with a spring-loaded wiper that removes excess oil from the valve stem with minimal friction. Made in the USA.

€11.49 €14.44

-€6.99

FEULING OIL PUMP CORP. Valve Locks — 7.00 mm, Steel, set of 8

Raises valve spring retainer to gain 0.050" installed height without machining the cylinder head spring set. Made in the USA.

€27.18 €34.17

Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads — 0.650" lift, 7.056 mm stem

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads —...

High-performance Beehive valve spring kit for Screamin' Eagle Heads that reduces valve-train noise, prevents spring separation, and installs as a direct bolt-in replacement.

€295.24 €371.16

-€50.73

FEULING OIL PUMP CORP. Beehive® Valve Spring Kit — 0.3125" stem, Econo Beehive

Premium conical ovate wire beehive springs with lightweight retainers; complete kit with seats, shims, locks and Viton® seals. Direct replacement for many Big Twin and XL cams up to 0.574"/.585" lift.

€197.31 €248.04

-€81.03

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — 0.750" lift

High-load Beehive® valve spring kit for high-lift cams; includes lightweight titanium retainers, chromoly seats, seat shims and premium Viton® seals. Up to 0.750" lift. Made in the USA.

€315.11 €396.14

Dress-Up Engine Case Bolt Fastener Kit — Stainless steel, with balance shafts, Silver polished

-€23.94

FEULING OIL PUMP CORP. Dress-Up Engine Case Bolt Fastener Kit — Stainless steel, with...

Precision-rolled threads, wide under-head flanges, and 170,000 psi tensile strength for reliable sealing and consistent torque.

€93.10 €117.04

Dress-Up 12-Point Cam Cover/Lifter Block Fastener Kit — Stainless Steel, Silver, Kit

-€23.37

FEULING OIL PUMP CORP. Dress-Up 12-Point Cam Cover/Lifter Block Fastener Kit —...

Precision fastener kit for cam covers and lifter blocks; includes hardware and moly assembly lubricant for proper installation.

€90.86 €114.23

-€9.39

FEULING OIL PUMP CORP. Cam and Pinion Shaft Kit — Black, Stainless steel, P/N 3042

Complete cam and pinion shaft hardware set with precision-rolled threads, high tensile strength, and all installation hardware included.

€36.50 €45.89

-€18.69

FEULING OIL PUMP CORP. 12-Point Exhaust Stud Kit — Black oxide, Stainless steel

Heat-treated 12-point exhaust studs with precision-rolled threads and a wide underhead flange for reliable sealing. Includes moly assembly lubricant and four studs. Made in the USA.

€72.72 €91.41

-€25.39

FEULING OIL PUMP CORP. Head Bolt Kit — For Sportster, Silver, Kit

Precision j-form threads resist galling and ensure consistent torque.

180,000 psi tensile strength outperforms OEM and grade 8 fasteners.

Includes all bolts for one motor and moly assembly lubricant; made in the USA.

€98.75 €124.14

-€62.22

FEULING OIL PUMP CORP. Head Bolt Kit — For Evo/Twin Cam, Silver

Complete kit with all head bolts and moly lubricant. Precision j-form threads, 180,000 psi tensile strength, made in the USA. Fitment: For Evo/Twin Cam.

€241.97 €304.19

-€2.22

DRAG SPECIALTIES Floorboard Mounting Kit — Driver floorboard, Silver

Includes all required hardware to mount floorboards to mount brackets; includes four shouldered bolts and four locknuts.

€6.30 €8.52

$Fork Tube Damper Mount Kit — 8 mm (5/16\"), yellow$

-€1.37

DRAG SPECIALTIES Fork Tube Damper Mount Kit — 8 mm (5/16\"), yellow

Includes two black bolts with recessed heads and two copper washers for secure attachment.

€3.88 €5.25

-€9.94

DRAG SPECIALTIES Disc Brake Hub Mounting Kit — Front, Chrome

Precision mounting kit with Grade 8 bolts and large-diameter button-head Torx® fasteners; made in the U.S.A.

€28.08 €38.02

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine