Engine (6)

Oil Cooler Kit — 10-row, low mount horizontal, Black

-€98.94
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 10-row, low mount horizontal, Black

Multipass flow and mini-louvered fins for maximum cooling.
Specially designed turbulators enhance heat dissipation.
Includes installation components; made in the USA.

€384.80 €483.74

-€112.20
Out of Stock

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, black

-€126.39
Out of Stock

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, black

Fan-assisted oil cooler kit optimized for low-speed and highway performance. Includes cooler, hoses, fan switch wiring, offset oil filter adaptor, and mounting hardware. Fan activates at ~205°F and delivers 150 cfm.

€491.52 €617.91

Oil Cooler Kit — 10-row, Low mount, Black

-€96.53
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 10-row, Low mount, Black

Specially designed turbulators and mini-louvered fins deliver efficient oil cooling and longer engine life; includes installation components.

€375.41 €471.94

Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, horizontal, Black

-€126.39
Out of Stock

JAGG OIL COOLERS Low-Mount Fan-Assisted Oil Cooler Kit — 10-row, horizontal, Black

Fan-assisted low-mount oil cooler kit for stop-and-go and highway use. Automatic fan at ~205°F, 150 cfm; includes hoses and mounting hardware.

€491.52 €617.91

-€23.88
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — Standard, Chain Conversion, Kit, 2063

Complete camshaft installation kit with roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, gaskets and installation hardware. Quick change and top-end options available. Made in the U.S.A.

€92.88 €116.76

-€29.14
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — Plus, Chain Conversion

Complete camshaft installation kit with roller bearings, ARP bolts, gasket sets, and quick-change/top-end options. Made in the U.S.A.

€113.32 €142.46

Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103", 1900–6000 RPM

-€87.64
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103",...

Broad, smooth power from 1900–6000 RPM; bolt-in fit for stock to mid 96" and 103" engines.

€340.80 €428.44

-€87.64
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Chain Conversion

Smooth midrange power with strong low-end torque. Bolt-in cam for many 88"–103" engines; performance valve springs required on '99–'04 models.

€340.80 €428.44

-€179.90
Out of Stock

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Plug-and-play cooler kit with a high-powered, waterproof fan and temperature-activated switch; includes wiring, hardware and instructions. Not for "Twin Cooled" models.

€699.64 €879.54

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Chain conversion

Fierce torque band and horsepower gains for large and small displacements.

Works from 2200–6250 rpm on large engines and 2500–6800 rpm on smaller high-revving builds.

Requires high-performance valve springs, pushrods, lifters, fueling work, and upgraded exhaust/intake/clutch.

€366.15 €460.30

Forceflow Cylinder Head Cooler Kit — Black, not for Twin Cooled models

-€151.61
Out of Stock

JIMS Forceflow Cylinder Head Cooler Kit — Black, not for Twin...

Complete plug-and-play cylinder head cooler kit with a waterproof fan, temperature-activated switch (140°F), OEM-type replacement horn, wiring and hardware. Not for "Twin Cooled" models.

€589.64 €741.25

-€179.90
Out of Stock

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Complete plug-and-play kit with high-powered waterproof fan and temperature-controlled operation; installs without drilling. Not for "Twin Cooled" liquid-cooled heads.

€699.64 €879.54

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°

More power than the 525 cams while maintaining low-end torque. Extremely smooth lobe profile for a quiet valve train and smooth cruise. Bolt-in for many 88"–103" engines; improves starting, throttle response and fuel mileage. Performance valve springs required on '99–'04 engines.

€366.15 €460.30

Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°, Exhaust lift 0.604", Intake lift 0.594"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°,...

High-performance camshaft that broadens the torque band and boosts horsepower across a wide range of displacements. Requires supporting high-performance components and tuning.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift 0.594"/0.604"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift...

Fierce-performing camshaft for large (103", 110", 124") and small 95" displacement engines; requires upgraded valve springs, pushrods, lifters, intake/exhaust and clutch.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255°/0.594", Exhaust 260°/0.604"

-€87.64
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°/0.594", Exhaust...

Fierce-performing camshaft tuned for both large and small displacements; optimized for broad torque and horsepower gains across wide rpm ranges.

€340.80 €428.44

HP+® Camchest Kit — Chain drive, 543 Series grind, intake & exhaust

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, 543 Series grind, intake &...

Complete camchest rebuild kit for '99–'06 Twin Cam (except '06 Dyna). Includes all components for cooler temps, higher oil pressure and quieter operation.

€1,636.28 €2,057.04

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — For '99-'06 Twin Cam, gear drive

Complete camchest rebuild kit for '99-'06 Twin Cam (except '06 Dyna). Increases oil pressure and flow, lowers engine and oil temps, reduces blow-by, and includes all bearings, gaskets and hardware for installation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

Complete camchest rebuild kit that improves oil flow, raises oil pressure, reduces engine and oil temperatures, and smooths operation. Fits '07–'17 Twin Cam and '06 Dyna.

€1,636.28 €2,057.04

HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07–'17 Twin Cam and '06 Dyna that increases oil pressure, lowers engine and oil temps, and smooths operation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07-'17 Twin Cam and '06 Dyna. Improves oil pressure, scavenge and cooling for cooler, more reliable operation.

€1,636.28 €2,057.04

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — Gear, Exhaust 248°, Intake 238°

Excellent bolt-in camshaft for stock to mid 96" and 103" engines; works well in many 88" and 96" applications. Smooth lobe layout for quiet operation and the smoothest cruise power band. Improves starting, throttle response and fuel economy; performance valve springs required on '99–'04 engines.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255° / 0.594" lift, Exhaust 260° / 0.604" lift

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255° / 0.594" lift,...

High-performance camshaft tuned for large-displacement 103", 110" and 124" engines and high-revving 95" applications; requires valvetrain, fueling and clutch upgrades.

€366.15 €460.30

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — for 74" and 80" engines

OEM-spec hydraulic replacement camshaft; H-grind reproduction of '48–'84 Big Twin stock cams. Ideal for repair and restoration of 74" and 80" engines.

€222.75 €280.03

H-Grind Camshaft — fits 74" and 80" engines, generator and alternator fit

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — fits 74" and 80" engines, generator and...

OEM-spec hydraulic camshaft reproducing stock '48–'84 Big Twin cams; ideal for repair and restoration of 74" and 80" engines. Available for generator and alternator engines.

€222.75 €280.03

-€51.63
Out of Stock

S&S CYCLE H-Grind Camshaft — H grind, for 74" and 80" Big Twin engines

OEM-spec hydraulic camshaft reproducing stock cams used in '48–'84 Big Twins; ideal for repair and restoration of 74" and 80" engines.

€200.80 €252.43

$Stainless Steel Braided Hose — 7.9 mm (5/16\"), 7.62 m (25')$

-€41.28
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16\"), 7.62 m (25')

For oil and gas applications; do not use with fuels over 10% alcohol.

€116.72 €158.00

-€46.78
Out of Stock

DRAG SPECIALTIES Stainless Steel Braided Hose — 9.5 mm (3/8") ID, 7.62 m (25')

Suitable for oil and gas applications. Not to be used with fuel over 10% alcohol.

€132.19 €178.97

583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583", Exhaust 262°/0.583", Gear drive

-€213.10
Out of Stock

S&S CYCLE 583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583",...

Reverses rear cam rotation to increase cam lift capability and valve timing accuracy. Includes gears, bearings, gasket and instructions. Professional installation required.

€828.74 €1,041.84

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine