Engine (6)

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain Drive, 574 Series

Complete camchest replacement kit for '99-'06 Twin Cam (except '06 Dyna). Restores reliability, increases oil pressure and flow, reduces engine and oil temperatures, and includes all necessary components for installation.

€1,636.28 €2,057.04

Piston Kit for Hot Set Up Kit® — Deck height 1.050 in, fits up to 4-5/8 in stroke, bore 4.125 in

-€143.22
Out of Stock

S&S CYCLE Piston Kit for Hot Set Up Kit® — Deck height 1.050 in, fits up...

Complete piston kit with forged pistons, rings, wristpins and clips. Deck height 1.050"; fits up to 4-5/8" stroke. Made in the USA.

€556.97 €700.19

Frame Clamp — For 1-1/8 in frame tubing, Black

-€1.98
Out of Stock

JAGG OIL COOLERS Frame Clamp — For 1-1/8 in frame tubing, Black

Mounts universal and custom oil coolers and other components to tubular frames; isolates from vibration. Made in the USA.

€7.70 €9.68

Piston Kit for Hot Set Up Kit® — Bore 4.125", +0.020" oversize, 111/117/124 cu in

-€143.22
Out of Stock

S&S CYCLE Piston Kit for Hot Set Up Kit® — Bore 4.125", +0.020"...

Complete kit with forged pistons, rings, wristpins, and clips. Made in the USA. Deck height 1.050"; fits up to 4-5/8" stroke.

€556.97 €700.19

Frame Clamp — For 1-1/4" frame tubing, Black

-€1.93
Out of Stock

JAGG OIL COOLERS Frame Clamp — For 1-1/4" frame tubing, Black

Secure, vibration-isolating clamp for mounting universal and custom oil coolers and accessories on tubular frames. Made in the USA.

€7.51 €9.44

$Frame Clamp — For 1-3/8\" frame tubing, Black$

-€1.98
Out of Stock

JAGG OIL COOLERS Frame Clamp — For 1-3/8\" frame tubing, Black

Precision clamp for mounting oil coolers and accessories on tubular frames. Isolates vibration and built in the USA for reliable performance.

€7.70 €9.68

High Compression Piston Kit — 4.010" bore, 10.6:1 compression, 110 cu in

-€124.61
Out of Stock

S&S CYCLE High Compression Piston Kit — 4.010" bore, 10.6:1 compression,...

High Compression Piston Kit with a 12.5cc raised dome delivering a 10.6:1 compression ratio. Deck height 1.0985", wristpin .927". Not for twin cooled or '17 touring models.

€484.59 €609.20

Frame Clamp — 1-1/2 in frame tubing, black

-€1.98
Out of Stock

JAGG OIL COOLERS Frame Clamp — 1-1/2 in frame tubing, black

Secures universal and custom oil coolers to tubular frames while isolating vibration. Made in the USA.

€7.70 €9.68

-€13.52
Out of Stock

JAGG OIL COOLERS Braided Oil Hose — 305 cm (10'), for 3/8" frame tube, black

Braided outer jacket for structure and a racy look, with internal steel wire reinforcement for added strength.

€52.63 €66.15

Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in, 10.3:1

-€121.37
Out of Stock

S&S CYCLE Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in,...

Forged big-bore piston kit compatible with stock rods; cylinders may require boring for proper fit. Precision-made for correct clearances.

€472.00 €593.37

Braided Oil Hose — 305 cm (10'), for 3/8" frame tube, stainless steel

-€13.18
Out of Stock

JAGG OIL COOLERS Braided Oil Hose — 305 cm (10'), for 3/8" frame tube,...

Braided outer jacket and internal steel wire reinforcement provide durable, high-performance oil routing and kink resistance.

€51.30 €64.48

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8", Compression 10.4:1, Displacement 107"

-€121.37
Out of Stock

S&S CYCLE Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8",...

Durable forged pistons for big bore builds. Compatible with stock rods with tapered wristpin ends. Cylinders may be bored to fit; machine to nominal diameter for correct clearance.

€472.00 €593.37

Oil Cooler Fan — THUNDERMAX EA7000, Black

-€66.20
Out of Stock

THUNDERMAX Oil Cooler Fan — THUNDERMAX EA7000, Black

Reduces oil temperatures using engine temperature and vehicle speed. Quick 15-minute install; no oil cooler removal. Plug-n-play on M8 models with compatible ECM. Made in the USA.

€257.47 €323.67

-€28.60
Out of Stock

JAGG OIL COOLERS Oil Filter Adapter — Black anodized, billet aluminum

Installs between the oil filter landing and filter to provide full-time oil flow to an oil cooler. HyperFlow design, NPT port, ProLine swivel fittings for easy plumbing.

€111.24 €139.84

-€3.45
Out of Stock

JAGG OIL COOLERS Viscosity Regulated Flow Actuator Kit — VRF, Black

Replaces the thermostatic actuator element with a VRF plug that routes oil to bypass the cooler during cold starts and sends hot, filtered oil to the cooler at operating temperature. Kit includes plug, spring, button head, O-ring and gasket. Made in the USA.

€13.47 €16.92

Out of Stock

ANDREWS Cam Drive Gear

High-quality heat-treated gears made in the U.S.A. for Harley-Davidson motorcycles.

€40.89

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€11.51
Out of Stock

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

Offset Oil Filter Adapter — Oil Filter, Black

-€36.48
Out of Stock

JAGG OIL COOLERS Offset Oil Filter Adapter — Oil Filter, Black

Automatic thermostatic bypass valve speeds warm-up; installs between engine and filter to accept an auxiliary oil cooler. Made in the USA.

€141.88 €178.36

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

-€96.53
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

Precision turbulators and mini-louvered fins maximize heat transfer to keep your engine cooler. Multipass flow and included installation components make for reliable performance and straightforward fitment. Made in the USA.

€375.41 €471.94

Out of Stock

ANDREWS PB+ Cams

Upgrade to PB+ Cams for enhanced horsepower and torque in your Harley-Davidson. This easy bolt-in set requires no headwork, suitable for stock springs up to 7000 rpm.

€474.45

-€85.79
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 6-row, frame-mount, black

High-performance oil cooler kit with advanced turbulators and mini-louvered fins for superior heat transfer and reliable installation components.

€333.61 €419.40

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€87.94
Out of Stock

JAGG OIL COOLERS Oil Cooler Kit — 6-row, low mount, Black

Advanced oil cooling with turbulators and mini-louvered fins for maximum heat transfer and minimal pressure loss. Includes installation components. Made in the USA.

€341.95 €429.89

Vertical Frame-Mount Oil Cooler Kit — 10-row, Black

-€104.92
Out of Stock

JAGG OIL COOLERS Vertical Frame-Mount Oil Cooler Kit — 10-row, Black

Specially designed turbulators increase heat dissipation; mini-louvered fins and multipass flow optimize cooling. Includes installation components. Made in USA.

€408.05 €512.97

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine