Engine (6)

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

Cams for Gear Drives — 21 Series, Intake & Exhaust

-€98.37

ANDREWS Cams for Gear Drives — 21 Series, Intake & Exhaust

Computer-assisted cam design; alloy steel billets with heat treatment; made in USA. Four-gear set required. Installer must verify coil bind and valve clearances.

€382.53 €480.90

Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°, Lift 0.590"

-€95.89

ANDREWS Cams for Gear Drives — 59 series, Intake 266°, Exhaust 270°,...

Precision cam set for gear drive installations. Computer-designed, alloy steel construction, made in the USA. Four-gear set required; installer must check clearances.

€372.91 €468.80

-€44.64

ANDREWS ANDREWS 1 CAM F/48-69 BIG TWIN

#1 CAM F/48-69 BIG TWIN

€173.65 €218.29

V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440" lift, Lobe centers 98°/104°, 4-Pack

-€94.63

ANDREWS V2 Grind Cams — Intake 240°/0.465" lift, Exhaust 244°/0.440"...

Bolt-in cams for stock applications up to 6000–6500 rpm; stock pushrods remain usable; solids not recommended. Made in the U.S.A.

€368.02 €462.65

V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

-€94.63

ANDREWS V4 Grind Cams — 256° duration, 0.490" lift, LC 98°/104°

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circles permit stock pushrods. Made in the U.S.A.

€368.02 €462.65

Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

-€39.78

ANDREWS Cam for Big Twin — 256° duration, 0.470" lift, BH grind, Gear

Precision-ground cams for Big Twin that increase mid-range and top-end power. Works with solid or hydraulic lifters; check clearances before installation.

€154.70 €194.48

Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

-€44.64

ANDREWS Cam for Big Twin — Exhaust 256°, Intake 244°, Grind AB, Gear

Increases mid-range and top-end power for street and drag bikes while keeping idle stable to 6,000 rpm. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€173.65 €218.29

-€44.64

ANDREWS ANDREWS ANDREWS 1 CAM BT-78-84

ANDREWS #1 CAM BT-78-84

€173.65 €218.29

-€39.78

ANDREWS ANDREWS ANDREWS 2 CAM BT 78-84

ANDREWS #2 CAM BT 78-84

€154.70 €194.48

Cam for Big Twin — Intake/Exhaust duration 252°, Intake/Exhaust lift 0.530"

-€52.02
Out of Stock

ANDREWS Cam for Big Twin — Intake/Exhaust duration 252°,...

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters; idle unaffected up to 6,000 rpm.

€202.28 €254.30

-€52.02

ANDREWS EV59 Cam — Intake 256°, Exhaust 260°, Lift 0.560 in

High-rpm cam for modified 80"–88" motors with a broad powerband to 6000+ rpm. Check coil bind and clearances; for use with high lift springs and collars.

€202.28 €254.30

-€52.02

ANDREWS EV7 Cam — 266° duration, 0.560" lift

Performance cam for big-inch stroker motors; excellent 2800–6500 rpm range, works with stock springs and hydraulics. Made in USA.

€202.28 €254.30

-€52.02

ANDREWS Cam for Big Twin — EV38 grind, Exhaust 252°, Intake 238°

Performance cam for Big Twin street and drag bikes. Works with solid or hydraulic lifters. Made in the USA. Check coil bind and clearances before installation.

€202.28 €254.30

-€52.02

ANDREWS EV51 Cam — Intake 252°, Exhaust 256°, 0.510" lift

Broad-range EV51 camshaft for modified street motors. 3000–6500 rpm powerband, easy install, works with stock hydraulics. Made in USA. Check clearances.

€202.28 €254.30

-€139.20

FEULING PARTS Cam Kit — 487 Series, Chain Drive, Reaper

Complete camshaft kit that includes 487 Reaper camshaft, cam installation kit, and Race Series lifters; bolt-in design, made in the USA.

€542.41 €681.61

Race Series® Camchest Kit — 487 Series grind, fits 114" and 117" engines, chain drive

-€409.72

FEULING PARTS Race Series® Camchest Kit — 487 Series grind, fits 114" and...

Complete Race Series® Camchest Kit with 487 Reaper® chain drive camshaft, full-install kit, Race Series® lifters, one-piece pushrod, high-flow oil pump and camplate—engineered for 114" and 117" oil-cooled V-twins to improve mid-to-top-end performance and oiling reliability.

€1,596.50 €2,006.22

Race Series® Camchest Kit with Short Travel Lifters — Chain Drive, Oil Cooled

-€409.72

FEULING PARTS Race Series® Camchest Kit with Short Travel Lifters — Chain...

Complete bolt-in camchest kit with 487 Reaper® camshaft, short travel hydraulic lifters, one-piece pushrods, high-flow oil pump and camplate for improved top-end power.

€1,596.50 €2,006.22

Race Series® Camchest Kit — 487 Reaper camshaft, 114" and 117" engines, chain drive

-€409.72

FEULING PARTS Race Series® Camchest Kit — 487 Reaper camshaft, 114" and 117"...

Complete bolt‑in camchest kit with 487 Reaper® camshaft, lifters, one‑piece pushrods, high‑flow oil pump and billet camplate for improved mid‑to‑top end performance.

€1,596.50 €2,006.22

Race Series® Camchest Kit with Short Travel Lifters — Water Cooled, Chain Drive

-€409.72

FEULING PARTS Race Series® Camchest Kit with Short Travel Lifters — Water...

Complete bolt-in camchest kit with 487 Reaper chain drive camshaft, short travel hydraulic lifters, one-piece pushrods, high-flow camplate and upgraded oil pump.

€1,596.50 €2,006.22

High Load Beehive® Valve Springs — 0.750" lift, Kit

-€83.05

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — 0.750" lift, Kit

Premium Feuling High Load Beehive® valve spring kit for performance engines. Allows up to 0.750" lift; includes 10° titanium retainers, chromoly spring seats and Viton® seals. Made in USA.

€322.99 €406.04

-€83.05

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — 0.750" lift

High Load Beehive® valve spring kit engineered for extreme fatigue life and high-lift camshafts; allows up to 0.750" lift.

€322.99 €406.04

Viton® Valve Guide Seals — 7.00 mm stem, 4 pack

-€3.26

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 7.00 mm stem, 4 pack

High-temperature resistant seals with a spring-loaded wiper for low-friction oil control. Made in the USA.

€12.67 €15.93

Viton® Valve Guide Seals — 5/16" stem, 4-pack

-€3.26

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16" stem, 4-pack

High-quality Viton® valve guide seals with a spring-loaded wiper for minimal friction; made in the USA.

€12.67 €15.93

-€7.71

FEULING OIL PUMP CORP. Valve Locks — 5/16" stem, set of 8

Raises valve spring retainer to gain 0.050" installed height without machining the cylinder head spring set. Made in the USA.

€29.95 €37.66

-€18.12

ANDREWS Valve Spring Upper Collars — 4-pack

Adds 0.050" more spring travel than stock. Stronger and lighter than stock. Uses stock keepers. Made in the United States.

€70.48 €88.60

Econo Beehive® Valve Spring Kit — up to 0.585" lift, fits '84–'04 Big Twin, '86–'03 XL ≤0.574", '05–'17 Twin Cam ≤0.585"

-€52.00

FEULING OIL PUMP CORP. Econo Beehive® Valve Spring Kit — up to 0.585" lift, fits...

Lightweight heat-treated chromoly beehive springs; hand measured and labeled; reduces valve weight for quicker revs and smoother motion. Includes retainers, seats, shims, locks and Viton® seals. Fits cams up to 0.585" lift.

€202.24 €254.24

Dress-Up Engine Case Bolt Fastener Kit — Silver, without Balance Shafts

-€32.98

FEULING OIL PUMP CORP. Dress-Up Engine Case Bolt Fastener Kit — Silver, without...

Precision rolled threads for consistent torque and reduced galling.

Wide under-head flange improves sealing to help prevent leaks.

170,000 psi tensile rating and 12-point hardened bolts for long-term durability.

€129.86 €162.84

-€16.57

FEULING OIL PUMP CORP. Dress-Up 12-Point Rocker Cover Fasteners — Silver, Kit

Precision rolled threads, wide under-head flange for even load distribution, 170,000 psi tensile strength, 12-point hardened bolts, includes moly assembly lubricant, made in the United States.

€64.41 €80.98

Rocker Box Fastener Kit — Black, fits TC Dyna & FL '01–'17, Softail '02–'17

-€28.93

FEULING OIL PUMP CORP. Rocker Box Fastener Kit — Black, fits TC Dyna & FL '01–'17,...

Precision rolled threads and wide under-head flanges for reliable sealing and consistent torque; complete kit includes internal fasteners and moly lube.

€112.55 €141.48

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine