Engine (6)

-€98.37

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€3.08

EASTERN MOTORCYCLE PARTS Dowel Pins — 0.251 in × 0.496 in

Replacement dowel pins for precise alignment and reliable component positioning.

€8.73 €11.81

-€84.27

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€98.37

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€2.07

EASTERN MOTORCYCLE PARTS Cam Bearing Retaining Ring — Outer, Cam Gear, 10 pack

High-quality OEM replacement components for cam bearing assemblies.

€5.86 €7.93

-€2.57

EASTERN MOTORCYCLE PARTS Cam Shims — 0.005", 10-pack

Essential shims for precise cam setup. Made in the USA.

€7.27 €9.84

-€2.57

EASTERN MOTORCYCLE PARTS Cam Shims — 0.010", 2nd gear, 10-pack

Precision shims for setting up new cams. Made in the USA.

€7.27 €9.84

$Cam Gear Thrust Washers — Size 0.040\", 5-pack$

-€4.70

EASTERN MOTORCYCLE PARTS Cam Gear Thrust Washers — Size 0.040\", 5-pack

Absorbs axial camshaft loads; precision machined; made in the USA.

€13.25 €17.95

-€51.96

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€51.96

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

-€10.86

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.120" spacer, 5-pack

Precision sprocket spacers to restore chain alignment. Made in the U.S.A.

€25.11 €34.00

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.130", 5-pack

Precision spacers that improve drivetrain alignment and durability. Made in the U.S.A.

€25.11 €34.00

-€8.89
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.140", 5-pack

Durable spacers for cam drive sprockets that maintain chain alignment and extend component life.

€25.11 €34.00

$Cam Drive Sprocket Spacers — 0.150\", 5-pack$

-€8.89

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.150\", 5-pack

Precision-machined spacers that ensure correct cam drive sprocket alignment and reduce wear. Made in the U.S.A.

€25.11 €34.00

-€7.83
Out of Stock

EASTERN MOTORCYCLE PARTS Gear-Side Pinion Shaft Nut — 5-pack, A-7916A

Durable gear-side shaft fastener made in the U.S.A.; precision threads resist vibration and ensure reliable clamping.

€22.15 €29.98

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine