Engine (5)

-€51.96

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€51.96

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

Piston Kit — 4.077" piston, 114 CI displacement, 11.0:1 compression

-€115.92

WISECO Piston Kit — 4.077" piston, 114 CI displacement, 11.0:1...

ArmorX™ coated piston kit with ArmorFit™ skirts, dome design for efficient burn, dedicated rings, and complete hardware included.

€327.99 €443.91

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke, 11:1 compression

-€114.36

WISECO Piston Kit — 4.125" bore, +0.190" oversize, 4-3/8" stroke,...

High-performance Wiseco piston kit with ArmorX™ coating and ArmorFit™ skirt. Includes pistons, rings, piston pins and circlips. Fits OEM and Screamin’ Eagle heads. Made in the U.S.A.

€323.56 €437.92

-€115.92

WISECO Piston Kit — 4.250" bore, 4-3/8" stroke, 11.0:1 compression

Two-piston kit with rings, piston pins and circlips. ArmorX™ coating and ArmorFit™ skirt reduce wear and noise while improving sealing; fits OEM and Screamin’ Eagle heads.

€327.99 €443.91

$Tracker Series™ Piston Kit — Bore 3.895\", Stroke 4.000\", 1562 cc$

-€68.28

WISECO Tracker Series™ Piston Kit — Bore 3.895\", Stroke 4.000\",...

Two-piston kit with forged crowns, precision-fit rings, force-fed pin oiling and ArmorGlide® skirt coating for improved durability and sealing.

€193.19 €261.47

Tracker Series™ Piston Kit — Bore 3.937 in, Stroke 4.375 in, Compression 10.5:1

-€72.30

WISECO Tracker Series™ Piston Kit — Bore 3.937 in, Stroke 4.375 in,...

High-strength piston kit with precision-fit rings, force-fed pin oiling, pressure-seal groove and low-friction skirt coating. Packaged with two pistons, rings, pins and circlips; made in the USA.

€204.57 €276.87

High-Performance Forged Piston Kit — 1700 cc, 3.885" bore, 4.375" stroke, 9.0:1 compression

-€115.92

WISECO High-Performance Forged Piston Kit — 1700 cc, 3.885" bore,...

Forged piston kit with ArmorGlide™ coated skirts, rings, retainer clips, and chrome piston pins. ArmorPlating on Twin Cam pistons improves ring seal and detonation resistance. Made in the USA.

€327.99 €443.91

$High-Performance Forged Piston Kit — Bore 3.885\", Stroke 4.375\", Compression 10.5:1$

-€115.92

WISECO High-Performance Forged Piston Kit — Bore 3.885\", Stroke...

Forged piston kit with ArmorGlide™ skirts, rings, retainer clips, and chrome piston pins; Twin Cam ArmorPlating for added protection. Made in USA.

€327.99 €443.91

-€10.86

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

High-Performance Replacement Ring Set — Bore 3.875", Displacement 103 cu in

-€9.22

WISECO High-Performance Replacement Ring Set — Bore 3.875",...

Replacement ring set for one piston; verify piston compatibility before purchase.

€26.09 €35.31

High-Performance Replacement Ring Set — Bore 3.875", Oversize +0.020", Displacement 95", VM Series

-€11.86

WISECO High-Performance Replacement Ring Set — Bore 3.875", Oversize...

Replacement rings for one piston; fit only matching pistons from the same manufacturer. Sold as a set for one piston.

€33.53 €45.39

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover, JGI-11293-K

-€11.86

JAMES GASKET Pushrod Gasket and O-Ring Kit — Pushrod, Tappet Cover,...

Complete gasket and o-ring kit to seal four pushrod covers; includes gaskets, o-rings, chrome-plated allen bolts and washers. Made in USA.

€33.45 €45.31

Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever & Starter Housing

-€6.50

JAMES GASKET Deflector Plate Gasket/Seal Kit — 60518-65-DLK, Shift Lever &...

Complete gasket and seal kit for the deflector plate that prevents leaks and restores reliable sealing. Made in the USA.

€22.07 €28.57

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine