Engine (5)

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€77.43
Out of Stock

ARLEN NESS 10 Gauge Cam Cover — Chrome

Precision-machined cam cover replaces OEM die-cast unit; includes gaskets and hardware for direct installation.

€301.10 €378.53

-€60.12
Out of Stock

ARLEN NESS 10 Gauge Lifter Block Covers — Chrome

Precision-machined lifter block covers with included chrome hardware. Sold in pairs for left and right installation.

€233.78 €293.90

-€154.45
Out of Stock

ARLEN NESS 10 Gauge Rocker Box Top Covers — Chrome, Pair

CNC-machined forged billet aluminum top covers replace OEM units; includes gaskets and hardware. Sold in pairs.

€600.61 €755.06

-€67.15
Out of Stock

ARLEN NESS 10 Gauge Cam Cover — Black Anodized, 6061 T-6 Aluminum

Machined forged-billet cam cover; replaces OEM die-cast cam cover; includes necessary gaskets and hardware.

€261.10 €328.25

10 Gauge Lifter Block Covers — Black anodized, 6061-T6 billet aluminum, pair

-€59.60
Out of Stock

ARLEN NESS 10 Gauge Lifter Block Covers — Black anodized, 6061-T6 billet...

Precision-machined lifter block covers with included chrome hardware. Sold in pairs for complete coverage.

€231.74 €291.34

10 Gauge Lifter Block Covers — Anodized titanium, Pair

-€56.01
Out of Stock

ARLEN NESS 10 Gauge Lifter Block Covers — Anodized titanium, Pair

Precision-machined valve-train covers with included chrome hardware; sold as a set of two.

€217.77 €273.78

-€121.34
Out of Stock

ARLEN NESS 10 Gauge Rocker Box Top Covers — Black anodized, Pair

CNC-machined forged aluminum covers that replace OEM rocker box top covers. Includes gaskets and mounting hardware; sold in pairs.

€471.90 €593.24

-€16.84
Out of Stock

ARLEN NESS 10-Gauge Points Cover — Blue anodized

Precision-machined 10-gauge points cover with chrome hardware. Matching derby and inspection covers available separately.

€65.43 €82.27

-€16.84
Out of Stock

ARLEN NESS 10-Gauge Points Cover — Orange anodized, 6061-T6 aluminum

Machined from 6061-T6 billet aluminum with included chrome hardware. Matching derby and inspection covers available separately. Sold each.

€65.43 €82.27

-€15.66
Out of Stock

ARLEN NESS 10-Gauge Points Cover — Points, Gold anodized, 6061-T6 aluminum

Precision-machined 10-gauge points cover. Includes chrome hardware. Matching covers sold separately. Sold each.

€60.90 €76.56

-€15.83
Out of Stock

ARLEN NESS 10-Gauge Points Cover — Orange anodized

Precision-machined billet points cover with included chrome hardware. Matching derby and inspection covers available separately.

€61.52 €77.35

-€15.83
Out of Stock

ARLEN NESS 10-Gauge Points Cover — Red anodized, 6061-T6 aluminum

Precision-machined points cover; includes chrome hardware. Sold each.

€61.52 €77.35

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84
Out of Stock

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

-€104.52
Out of Stock

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

Pushrod Tube Cover Kit — 10 Gauge, Black Anodized

-€50.98
Out of Stock

ARLEN NESS Pushrod Tube Cover Kit — 10 Gauge, Black Anodized

Precision-machined billet cover kit with lower tubes for easy access to adjustable pushrods; includes necessary hardware and seals. Requires OEM upper tubes, springs and washers.

€198.31 €249.29

-€101.56
Out of Stock

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63
Out of Stock

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63
Out of Stock

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — Chain Drive, 60 Series, Pair

Computer-assisted cam design built from alloy steel billets and heat-treated for durability. Made in the USA; installer must verify coil bind and clearance specifications before final installation.

€333.84 €419.68

-€44.64
Out of Stock

ANDREWS EV72 Cam — fits 92" or larger street motors

High-performance EV72 Cam for 92"+ street motors. Broad 2800–6000 rpm powerband; compatible with hydraulic lifters; made in USA.

€173.65 €218.29

Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series grind, Pair

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 236° intake, 240° exhaust, 37 Series...

Precision-machined, computer-designed alloy-steel cam set, heat-treated and made in the USA. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

-€95.89
Out of Stock

ANDREWS Cam Set — Gear Drive, 55 Series, Intake & Exhaust, Pair

Computer-designed alloy-steel cams, heat-treated and made in the USA. Four-gear set required. Installer must check clearances.

€372.91 €468.80

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine