Engine (5)

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

-€51.63

S&S CYCLE H-Grind Camshaft — Gear, for '48–'84 Big Twins, fits 74" and 80"

OEM-spec hydraulic H-Grind camshaft, reproduces stock '48–'84 Big Twins cams; ideal for 74" and 80" restorations. Compatible with generator and alternator engines.

€200.80 €252.43

Stainless Steel Braided Hose — 9.5 mm (3/8"), 91 cm (3'), Fuel, Oil

-€5.71

DRAG SPECIALTIES Stainless Steel Braided Hose — 9.5 mm (3/8"), 91 cm (3'),...

Braided hose for oil and gas applications. Do not use with fuels over 10% alcohol.

€16.14 €21.85

-€192.09

S&S CYCLE 551G Gear Drive Camshaft Kit — 551 Series grind

Bolt-in cam set for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque and timing accuracy; professional installation required.

€747.05 €939.14

-€84.68

S&S CYCLE 551C Chain Drive Camshaft Kit — Chain, 551 Series

Bolt-in cam set for 96–106 CID engines; improves low and midrange torque. Fits models with hydraulic tensioner chain drive.

€329.33 €414.01

-€84.68

S&S CYCLE 583C Chain Drive Camshaft Kit — 583 Series grind

Great cam for Softail and Dyna; strong low-end torque and horsepower. Best from 1500–5000 rpm. Installer must check coil bind and clearances. Not for compression ratios > 10.1:1.

€329.33 €414.01

-€95.34

S&S CYCLE 640 Easy Start Camshaft Kit — 95/96/103/110 cu in, 10.5:1–11.5:1

Reduces starting compression for easier starts, then fully retracts at higher rpm for full performance. For 95/96/103/110 engines, 10.5:1–11.5:1. Not for models with OEM compression releases. High-lift springs and adjustable pushrods required.

€370.77 €466.11

Reaper® 505/515 Cam — 505/515 grind, Exhaust lift 0.515 in, Intake lift 0.505 in

-€92.57

FEULING OIL PUMP CORP. Reaper® 505/515 Cam — 505/515 grind, Exhaust lift 0.515 in,...

Produces a wide powerband in stock engines; split-lift design for strong top-fuel sound; compatible with stock pushrods and valve springs; fueling recommends new lifters with new camshafts.

€360.00 €452.57

-€35.45

FEULING OIL PUMP CORP. Camshaft Installation Kit — FEULING PARTS, 2058, Standard

Complete camshaft installation kit with precision bearings, ARP® fasteners, gaskets and assembly compounds for dependable installation.

€137.85 €173.30

-€43.40

FEULING OIL PUMP CORP. Camshaft Installation Kit — Plus, 2059

Complete kit with roller bearings, Koyo Torrington® needles, 12‑point ARP® bolts, gaskets and O‑rings; plus and quick‑change options; made in USA.

€168.76 €212.16

-€109.47

S&S CYCLE HP103 Easy Start Camshaft Kit — Grind HP103, Chain

Easy-start camshaft kit for 103" engines; bolt-in design, high-rpm power band, includes hardware. Not for models with OEM compression releases.

€425.73 €535.20

Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

-€5.79

DRAG SPECIALTIES Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

Compact clamps for small-diameter hoses and tubing. Designed for use on oil and gas lines up to 3/8" in diameter. Made in the USA.

€16.36 €22.15

-€101.30

S&S CYCLE 640 Easy Start Camshaft Kit — Chain, S&S CYCLE 330-0331

Reduces crank compression for easier starts, then restores full compression for normal running. Fits 95", 96", 103" and 110" engines with 10.5:1–11.5:1 compression; requires high-lift springs and adjustable pushrods. Not for models with OEM compression releases.

€393.94 €495.24

-€5.78

DRAG SPECIALTIES Chrome Rocker Oil Lines — Chrome

Overhead oil line set with crossover and crankcase-to-rocker box line; includes fittings and seals.

€16.34 €22.12

-€216.89

S&S CYCLE MR103 Easy Start Camshaft kit — Gear type

Bolt-in camshaft kit for easier starting on 103" engines; restores full compression once running. Includes cams and hardware; installer must verify clearances.

€843.44 €1,060.33

-€170.11

S&S CYCLE 635 H.O. Gear Drive Camshaft Kit — Gear drive, Raw finish

High‑lift camshaft kit for modified engines 106"+ displacement; increases accuracy by removing chain lash; requires professional installation and press.

€661.56 €831.67

-€11.75

GOODRIDGE Hose — Oil line, Chrome

Replacement hose for repair or upgrade.

€45.55 €57.30

-€60.31

FEULING OIL PUMP CORP. OE+ Camplate — 6061 aluminum

Direct bolt-in replacement for '99–'06 Twin Cam® camshafts. Pre-set pressure relief valve (50–60 psi), added cam journal oil groove, accepts factory oil pump. Includes bearing retainer plate and hardware. Made in USA.

€234.53 €294.84

-€65.93

FEULING OIL PUMP CORP. OE+ Camplate — Fits '99–'06 Twin Cam®

Direct bolt-in camplate for '99–'06 Twin Cam® engines; pre-set relief valve (50–60 psi), added oil grooves and feed holes, includes retainer plate and hardware.

€256.36 €322.29

-€64.79

FEULING OIL PUMP CORP. OE+ Camplate — 6061 Aluminum

Direct bolt-in stock replacement camplate engineered for improved lubrication and cold-start protection. Preset relief valve (50–60 psi); includes bearing retainer plate and hardware.

€251.97 €316.76

-€60.31

FEULING OIL PUMP CORP. OE+ Camplate — 6061 aluminum

FEULING® OE+ billet camplate is a direct bolt-in replacement for '99–'06 Twin Cam® style camshafts, with pre-set pressure relief and added oiling features.

€234.53 €294.84

-€164.10

JIMS Forceflow Cylinder Head Cooler Kit — Chrome

Directs air through a side scoop to cool cylinder heads; includes a high-powered waterproof fan, temperature switch (activates at 140°F), manual override, wiring and hardware. Plug-and-play installation with no drilling. Not for "Twin Cooled" models.

€463.74 €627.84

-€11.22

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 6-pack, sizes 0.100"–0.150"

Precision spacers for cam drive sprockets. Made in the U.S.A.; check alignment and torque during installation.

€31.73 €42.95

Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit — S&S CYCLE Kit, PN 106-6027

-€44.64

S&S CYCLE Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit...

Quality camshaft kit for 1954–1984 Big Twin models; higher lift and improved valve timing. Quiet hydraulic operation when used with hydraulic conversion kits.

€173.59 €218.23

-€1.69

S&S CYCLE Idler Gear Shim — 1.37 mm (0.054 in)

Precision shims for circuit breaker drive and idler gear assemblies. Sold as a set.

€6.58 €8.27

-€2.12

S&S CYCLE Idler Gear Shim — 1.47 mm (0.058")

Precision shims for circuit breaker drive and idler gear assemblies. Improve gear mesh and reduce play for smoother operation.

€8.25 €10.37

585V Camshaft — Grind 585V, Intake 245°, Exhaust 260°, Lift 0.585", Raw

-€51.63

S&S CYCLE 585V Camshaft — Grind 585V, Intake 245°, Exhaust 260°, Lift...

Thoroughly tested S&S camshaft for 80"–96" engines; optimized for 3500–6000 rpm. Made in USA. Installer must verify clearances.

€200.80 €252.43

-€9.20

FEULING OIL PUMP CORP. Camshaft Sprocket Alignment Spacer Kit — 6 Pack

Spacers to align the rear camshaft sprocket with the crank sprocket; kit includes six thicknesses (0.297"–0.357"); fits early-style camshafts and conversion cam plates.

€35.80 €45.00

-€8.30

FEULING OIL PUMP CORP. Cam Chain — 16 links, inner

Stock replacement cam chain for timing systems.

€32.39 €40.69

-€8.30

FEULING OIL PUMP CORP. Cam Chain — 22 links, outer mount

Stock replacement cam chain for reliable performance and long service life.

€32.39 €40.69

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company