Engine (5)

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€51.96
Out of Stock

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64
Out of Stock

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84
Out of Stock

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84
Out of Stock

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

Transmission Side Cover Bolt Kit — P-10-12-07, Socket-head, Steel, Chrome

-€13.59
Out of Stock

GARDNER-WESTCOTT Transmission Side Cover Bolt Kit — P-10-12-07, Socket-head,...

Complete hardware set for reinstalling the side cover of the transmission. Made in the USA.

€52.90 €66.49

Transmission Side Cover Bolt Kit — Chrome, Kit

-€12.64
Out of Stock

GARDNER-WESTCOTT Transmission Side Cover Bolt Kit — Chrome, Kit

Complete bolt set for the transmission side cover. Made in the USA. Easy to install.

€49.14 €61.78

-€20.07
Out of Stock

GARDNER-WESTCOTT Primary and Derby Cover Bolt Kit — Chrome

Hardware kit for primary and derby cover installation. Made in the U.S.A.

€78.08 €98.15

-€29.61
Out of Stock

GARDNER-WESTCOTT Motor Mount Kit — Chrome, Front

Durable engine support assembly made in the U.S.A., with precision components and complete hardware for secure mounting.

€115.11 €144.72

-€84.11
Out of Stock

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor sets with all side covers and mounting hardware. Made in the U.S.A.

€327.08 €411.19

-€72.27
Out of Stock

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome, Silver, Polished

Complete Big Twin motor set includes side covers, lifter base timing plug, inner primary mount, tip, front and rear motor mounts. Made in the U.S.A.

€281.01 €353.28

-€82.78
Out of Stock

GARDNER-WESTCOTT Big Twin Motor Sets — Chrome finish

Complete motor set including side covers, lifter base timing plug, inner primary mount, tip, and front and rear motor mounts. Made in the U.S.A.

€321.93 €404.71

-€10.46
Out of Stock

GARDNER-WESTCOTT Caliper Mounting Bolt Kit — Socket-head, Chrome, Silver

Precision replacement bolts and washers for caliper mounting; made in the USA.

€40.65 €51.11

-€1.40
Out of Stock

GARDNER-WESTCOTT Timing Cover Bolt Kit — C-20-37, Chrome

Complete bolt kit for timing cover installation. Includes necessary fasteners for a secure fit; easy to install.

€5.48 €6.88

Handlebar Lever Switch Housing Master Cylinder Fastener — Handlebar lever mount, master cylinder, switch housing, silver chrome

-€7.48
Out of Stock

GARDNER-WESTCOTT Handlebar Lever Switch Housing Master Cylinder Fastener —...

Precision fastener made in the U.S.A.; corrosion-resistant finish and easy installation.

€29.15 €36.63

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine