Engine (5)

Piston Kit for Hot Set Up Kit® — Deck height 1.050 in, fits up to 4-5/8 in stroke, bore 4.125 in

-€143.22
Out of Stock

S&S CYCLE Piston Kit for Hot Set Up Kit® — Deck height 1.050 in, fits up...

Complete piston kit with forged pistons, rings, wristpins and clips. Deck height 1.050"; fits up to 4-5/8" stroke. Made in the USA.

€556.97 €700.19

Piston Kit for Hot Set Up Kit® — Bore 4.125", +0.020" oversize, 111/117/124 cu in

-€143.22
Out of Stock

S&S CYCLE Piston Kit for Hot Set Up Kit® — Bore 4.125", +0.020"...

Complete kit with forged pistons, rings, wristpins, and clips. Made in the USA. Deck height 1.050"; fits up to 4-5/8" stroke.

€556.97 €700.19

Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in, 10.3:1

-€121.37
Out of Stock

S&S CYCLE Big Bore Forged Piston Kit — 3.937" bore, 4" stroke, 98 cu in,...

Forged big-bore piston kit compatible with stock rods; cylinders may require boring for proper fit. Precision-made for correct clearances.

€472.00 €593.37

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8", Compression 10.4:1, Displacement 107"

-€121.37
Out of Stock

S&S CYCLE Big Bore Forged Piston Kit — Bore 3.937", Stroke 4-3/8",...

Durable forged pistons for big bore builds. Compatible with stock rods with tapered wristpin ends. Cylinders may be bored to fit; machine to nominal diameter for correct clearance.

€472.00 €593.37

Out of Stock

ANDREWS Cam Drive Gear

High-quality heat-treated gears made in the U.S.A. for Harley-Davidson motorcycles.

€40.89

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

Out of Stock

ANDREWS PB+ Cams

Upgrade to PB+ Cams for enhanced horsepower and torque in your Harley-Davidson. This easy bolt-in set requires no headwork, suitable for stock springs up to 7000 rpm.

€474.45

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

$Piston Kit for S&S Motors — Bore 3.875\", Oversize +0.005\", 103 cu in$

-€111.18
Out of Stock

S&S CYCLE Piston Kit for S&S Motors — Bore 3.875\", Oversize +0.005\",...

Complete piston kit includes pistons, rings, wrist pins and clips for a full motor replacement. Made in the U.S.A.

€432.34 €543.52

Piston Kit for S&S Motors — Bore 3.875", Displacement 103", Oversize +0.010"

-€111.18
Out of Stock

S&S CYCLE Piston Kit for S&S Motors — Bore 3.875", Displacement 103",...

Complete piston kit with forged pistons, rings, wrist pins and clips. Made in the U.S.A.

€432.34 €543.52

Reaper® Camshaft Chain Drive Conversion — 574 Series, Exhaust 255°, Intake 240°, Pair

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft Chain Drive Conversion — 574 Series, Exhaust...

High-performance chain-drive camshaft delivering a wide power band for modified and big-bore engines; bolt-in for 103" and 110" stock engines.

€366.15 €460.30

-€112.20
Out of Stock

S&S CYCLE 557 Easy Start Camshaft Kit — 557 Series grind, chain drive

Bolt-in camshaft kit that eases starting by temporarily reducing compression; includes all required seals and hardware. Installer must verify clearances. Not for OEM compression-release models.

€436.38 €548.58

-€2.41
Out of Stock

S&S CYCLE Wrist Pin Circlips — 0.927 in, 4-pack

Precision circlips for 0.927 in wristpins. Made in the U.S.A.

€9.39 €11.80

-€23.88
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — Standard, Chain Conversion, Kit, 2063

Complete camshaft installation kit with roller bearings, Koyo Torrington® needle bearings, 12-point ARP® bolts, gaskets and installation hardware. Quick change and top-end options available. Made in the U.S.A.

€92.88 €116.76

-€91.64
Out of Stock

JE PISTONS Piston Kit — 3.875 in bore, 1545 cc, 10.5:1

Machined from 2618-T6 forged aluminum for professional competition; pins, pin locks and rings included. Made in the U.S.A.

€259.30 €350.94

-€29.14
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — Plus, Chain Conversion

Complete camshaft installation kit with roller bearings, ARP bolts, gasket sets, and quick-change/top-end options. Made in the U.S.A.

€113.32 €142.46

-€91.64
Out of Stock

JE PISTONS Piston Kit — 3.937", 9.5:1, 1595 cc

High-strength 2618-T6 forged-aluminum piston kit for competition; includes pins, locks and rings. Made in USA.

€259.31 €350.95

-€128.49
Out of Stock

JE PISTONS Piston Kit — 3.937 in, 10.5:1, 1595 cc

High-strength forged 2618-T6 aluminum piston kit for extreme and competition use. Pins, locks and rings included. Made in the U.S.A.

€363.56 €492.05

Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103", 1900–6000 RPM

-€87.64
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series grind, fits 88", 96", 103",...

Broad, smooth power from 1900–6000 RPM; bolt-in fit for stock to mid 96" and 103" engines.

€340.80 €428.44

-€87.64
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Chain Conversion

Smooth midrange power with strong low-end torque. Bolt-in cam for many 88"–103" engines; performance valve springs required on '99–'04 models.

€340.80 €428.44

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Chain conversion

Fierce torque band and horsepower gains for large and small displacements.

Works from 2200–6250 rpm on large engines and 2500–6800 rpm on smaller high-revving builds.

Requires high-performance valve springs, pushrods, lifters, fueling work, and upgraded exhaust/intake/clutch.

€366.15 €460.30

Replacement Piston — 3.750" diameter, 4-3/8" stroke, 9.2:1 compression, Kit

-€23.55
Out of Stock

DRAG SPECIALTIES Replacement Piston — 3.750" diameter, 4-3/8" stroke, 9.2:1...

OEM-quality cast aluminum alloy construction. Kits include two pistons, wrist pins and clips. Accepts OEM or Hastings rings (sold separately).

€66.56 €90.11

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°

More power than the 525 cams while maintaining low-end torque. Extremely smooth lobe profile for a quiet valve train and smooth cruise. Bolt-in for many 88"–103" engines; improves starting, throttle response and fuel mileage. Performance valve springs required on '99–'04 engines.

€366.15 €460.30

$Replacement Piston — +0.005\" oversize, 3.755\" diameter, 4-3/8\" stroke$

-€25.84
Out of Stock

DRAG SPECIALTIES Replacement Piston — +0.005\" oversize, 3.755\" diameter,...

OEM-quality replacement piston in cast aluminum alloy. Kits include two pistons, wrist pins and clips. Accepts OEM or Hastings rings (order separately).

€73.06 €98.90

Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°, Exhaust lift 0.604", Intake lift 0.594"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°,...

High-performance camshaft that broadens the torque band and boosts horsepower across a wide range of displacements. Requires supporting high-performance components and tuning.

€366.15 €460.30

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine