Engine (4)

-€14.58

FEULING OIL PUMP CORP. Cam Chain Tensioner — Stock Replacement, PN 8073

Precision billet aluminum housing with injection-molded nylon pad enhanced with PTFE. Single-piston design matching stock pressure, includes ARP® 12-point hardware. Made in USA.

€56.82 €71.40

-€159.84

FEULING OIL PUMP CORP. Race Series® Chain Drive Camshaft Kit — Chain Drive, P/N 1459

Complete Race Series® camshaft kit with Reaper® cam, full-travel hydraulic lifters (0.200" travel), gasket/o-ring kit, ARP cam/crank fasteners and installation kit. Made in the USA. Not for '23-'24 models with 121" VVT motors.

€621.59 €781.43

-€10.04

JIMS Pinion Shaft Bushing — 1.0035 in

Quality pinion shaft bushing manufactured in the U.S.A. Precision fit for reliable performance.

€39.03 €49.07

-€10.72

JIMS Pinion Shaft Bushing — 1.0015" diameter

Quality pinion shaft bushings. Made in the U.S.A.

€41.72 €52.44

-€9.46

JIMS Pinion Shaft Bushing — 0.8775" diameter, P/N 25593-57

Precision pinion shaft bushing that improves drivetrain reliability. Made in the U.S.A.

€36.76 €46.22

-€181.90

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — Red

High-volume pump increases oil pressure and flow, reduces temperatures and wet sumping; bench-tested relief valve and proven performance gains on M-Eight.

€707.36 €889.26

-€204.97

FEULING OIL PUMP CORP. Race Series Oil Pump/Camplate Kit — Red

High-performance oil pump and camplate kit that increases oil pressure and flow, reduces temperatures, and corrects common factory scavenge issues for M-Eight engines.

€797.13 €1,002.10

Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

-€9.37

JIMS Motor Sprocket Shaft Spacer — JIMS, P/N 24002-70

Precision-machined spacer with a 32-micron burr-free finish for extended seal life. Made in the U.S.A.

€36.44 €45.81

-€11.18

JIMS Wrist Pin Bushing — Standard, Bronze

Precision wrist pin bushings that hold concentricity to less than .0002" with a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

-€11.18

JIMS Wrist Pin Bushing — Oversize (+0.005"), Pair

High-precision wrist pin bushing machined to tight concentricity tolerances with a lead-in edge for easy installation.

€43.45 €54.63

-€8.53

JIMS Cam Cover Bushing — 1.2015" bronze

Precision-machined cam cover bushing finished in one operation with a .0002" tolerance. Lead-in design makes installation and alignment easier. Made in the U.S.A.

€33.16 €41.69

-€11.18

JIMS Wrist Pin Bushing — Standard, Pair

Precision-machined wrist pin bushings hold concentricity to less than .0002" and feature a lead-in edge for easy installation. Made in the U.S.A.

€43.45 €54.63

618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°, Exhaust lift 0.618", Intake lift 0.608"

-€82.27

FEULING PARTS 618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°,...

Race-oriented camshaft for high-performance engines. Requires supporting high-lift valvetrain, ported heads and intake; check clearances and match Race Series oiling system.

€320.52 €402.79

-€67.88

FEULING PARTS 487 Series Chain Drvie Camshaft — Chain Drive, Reaper

Aggressive bolt-in cam for 4.25" stroke, 114"–117" engines. Wide powerband; responds well to increased bore, compression, exhaust and intake changes. Specs measured at 0.050" with a 1.61 rocker ratio. Manufacturer advises against tuning beyond stock emissions.

€264.49 €332.37

-€59.01

FEULING PARTS Inner Cam Bearing — 20 Pack

Heavy-duty full-complement component designed for performance engines. Manufactured by Koyo® Torrington®. Made in the USA.

€229.52 €288.53

-€78.43

FEULING PARTS Inner Cam Bearing — 20-Pack, FEULING PARTS 2084

Heavy-duty full-complement bearing manufactured by Koyo Torrington in the USA for high-performance engine use.

€305.07 €383.50

-€6.76

FEULING PARTS Hydraulic Cam Chain Tensioner Pad — Stock replacement, P/N 8070

Injection molded nylon pad with PTFE for improved wear resistance. Includes pad and pin; fits factory aluminum housing and hydraulic unit. Made in the USA.

€26.32 €33.08

-€45.08

FEULING PARTS Hydraulic Cam Chain Tensioner Kit — 8084

Complete hydraulic camchain tensioner kit for stock M8 models. Includes sprocket, pad, pin, and spacers. Made in USA.

€175.68 €220.76

Endurance Beehive® Valve Springs with Titanium Retainers — up to 0.650" lift, 375 lb @ 1.150" open height

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers — up...

Direct bolt-in valve spring kit up to 0.650" lift; includes titanium retainers, machined seats, shims, locks and Viton® seals. Made in the USA.

€295.24 €371.16

Endurance Beehive® Valve Springs with Titanium Retainers — up to 0.650" lift, Chrome-Silicon, Titanium retainers, Kit

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers — up...

Hi-tensile chrome-silicon Beehive valve springs with lightweight titanium retainers; direct bolt-in replacement up to 0.650" cam lift; includes seals and hardware.

€295.24 €371.16

-€6.00

FEULING OIL PUMP CORP. Sandwich Adapter Rebuild Kit — 1/8" NPT ports, oil filter kit

Replacement gasket, O‑ring and Allen hardware for sandwich adapter rebuilds; fits offset adapters with 1/8" NPT ports; made in the USA.

€23.34 €29.34

Viton® Valve Guide Seals — 5/16" stem, 4-pack

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16" stem, 4-pack

High-quality Viton® seals for valve guides with a spring-loaded wiper that minimizes oil carryover. Made in the USA.

€11.49 €14.44

$Viton® Valve Guide Seals — 5/16\", 4 pack$

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16\", 4 pack

High-quality seals designed to handle high engine temperatures with a spring-loaded wiper that removes excess oil from the valve stem with minimal friction. Made in the USA.

€11.49 €14.44

-€6.99

FEULING OIL PUMP CORP. Valve Locks — 8-pack, triple-groove, steel

Secures valve retainers to valve stems; precision machined and made in the USA.

€27.18 €34.17

Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads — 0.650" spring lift, Titanium collar, NexTex finish

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads —...

Direct bolt-in Beehive valve spring kit for Screamin' Eagle heads; supports up to 0.650" cam lift.

€295.24 €371.16

-€50.73

FEULING OIL PUMP CORP. Beehive® Valve Spring Kit — 0.3125" stem, Econo Beehive

Premium conical ovate wire beehive springs with lightweight retainers; complete kit with seats, shims, locks and Viton® seals. Direct replacement for many Big Twin and XL cams up to 0.574"/.585" lift.

€197.31 €248.04

High Load Beehive® Valve Springs — up to 0.750" lift, 415 lb at 1.215" open

-€81.03

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — up to 0.750" lift, 415 lb...

Race-proven Beehive® valve spring kit for high-lift cams, offering high fatigue life and precise valve control; includes retainers, seats, shims, locks and premium seals.

€315.11 €396.14

Dress-Up Engine Case Bolt Fastener Kit — Engine case, with balance shafts, Silver polished

-€23.94

FEULING OIL PUMP CORP. Dress-Up Engine Case Bolt Fastener Kit — Engine case, with...

Precision-rolled threads and wide under-head flange provide consistent torque and reliable sealing.

170,000 psi tensile strength and quality 12-point hardened bolts, manufactured to ARP®/Feuling® specifications.

€93.10 €117.04

Dress-Up 12-Point Cam Cover/Lifter Block Fastener Kit — stainless steel, polished silver

-€23.37

FEULING OIL PUMP CORP. Dress-Up 12-Point Cam Cover/Lifter Block Fastener Kit —...

Precision rolled threads and a wide under-head flange provide consistent torque and improved sealing. Includes lifter block, cam cover, oil filter adapter and crank sensor fasteners, plus moly assembly lubricant.

€90.86 €114.23

-€9.39

FEULING OIL PUMP CORP. Cam and Pinion Shaft Kit — Stainless Steel, Black

Precision cam and pinion shaft kit with rolled threads, wide under-head flange, 170,000 psi tensile strength; includes bolts, hardened washers, and camshaft retaining ring.

€36.50 €45.89

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine