Engine (4)

-€17.37

KURYAKYN Coolant Pump Cover — KUR6421, Black

Direct OE replacement; hides the voltage regulator for a clean, factory look. Easy bolt-on installation.

€67.56 €84.93

Forceflow Cylinder Head Cooler Kit — Black

-€151.61

JIMS Forceflow Cylinder Head Cooler Kit — Black

Plug-and-play cylinder head cooling kit with a high-powered waterproof fan and automatic temperature switch that engages at 140°F. Not for "Twin Cooled" models.

€589.64 €741.25

-€85.50

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, chain, pair

Bolt-in performance cam for street machines; smooth, quiet valve train and strong 1900–6000 RPM power band.

€332.49 €417.99

-€167.07

JIMS Forceflow Cylinder Head Cooler Kit — Black

High-powered waterproof fan directs air around cylinder heads; includes temperature switch (activates at 140°F), manual override, wiring, hardware, and instructions. Plug-and-play installation with no drilling. Not for "Twin Cooled" models with liquid cooled heads.

€649.68 €816.75

Radiator Guard — Anodized gray, 6061 aluminum

-€37.44

DYNOJET-HARLEY Radiator Guard — Anodized gray, 6061 aluminum

Durable radiator guard with mounting bracket for easy installation. Protects against rocks and road debris. Made in the USA.

€145.63 €183.07

-€3.90

MOOSE OFFROAD HARD-PARTS Hose Protector — 38 mm inside diameter, 254 mm length

Shields exposed hoses from abrasion and heat; durable spring steel construction and made in the USA.

€11.05 €14.95

Hose Protector — 25 mm inside diameter, 254 mm length (10"), Silver

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 25 mm inside diameter, 254 mm length (10"),...

Protects hoses from abrasion and heat. Durable spring construction. Made in the USA.

€10.31 €13.95

-€3.64

MOOSE OFFROAD HARD-PARTS Hose Protector — 11.00 mm ID, 254 mm length, Silver

Protects hoses from abrasion and heat.

Made in the USA.

€10.31 €13.95

Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in), silver

-€3.38

MOOSE OFFROAD HARD-PARTS Hose Protector — 6.4 mm fuel line (1/4 in), 254 mm (10 in),...

Durable hose protector that shields hoses from abrasion and heat. Made from stainless spring steel. Made in the USA.

€9.57 €12.95

-€58.62

SAMCO SPORT Radiator Hose Kit — Black

Handcrafted in the UK. Improves coolant flow up to 9°F cooler. Extremely high burst pressure and increased durability. Recommended stainless steel clamps.

€165.67 €224.29

-€8.16

SAMCO SPORT Radiator Clamp Kit — Silver, stainless steel

Marine-grade 18/8 clamps with rounded edges, smooth inners and polished surfaces; includes all clamps needed for radiator hose installation.

€23.08 €31.24

-€44.31

DRAG SPECIALTIES Radiator Shield — Black, aluminum

Protects the radiator from impacts and debris with durable construction for long-term use.

€125.23 €169.54

-€5.05

DRAG SPECIALTIES SEATS Oil Cooler Cover — 8" L x 2-1/4" W x 1-1/4" D, Slimline, Black

Quality black vinyl cover with hook-and-loop fasteners. Fits OEM and Jagg Slimline oil coolers. Dimensions: 8" L x 2-1/4" W x 1-1/4" D. Made in the USA.

€14.30 €19.35

-€2.22

JAGG OIL COOLERS Replacement Gasket Service Kit — JAGG OIL COOLERS, GK4600, Black

Service kit with replacement gasket for oil filter adapter; made in the USA.

€8.64 €10.86

$Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'), Stainless steel$

-€5.26

DRAG SPECIALTIES Stainless Steel Braided Hose — 6.4 mm (1/4\"), 91 cm (3'),...

Suitable for oil and gas applications. Not for use with fuel over 10% alcohol. Inspect regularly and replace if worn.

€14.85 €20.11

-€5.53

DRAG SPECIALTIES Stainless Steel Braided Hose — 7.9 mm (5/16"), 91 cm (3')

Hose for oil and gas applications. Not for use with fuel over 10% alcohol.

€15.65 €21.18

-€51.63

S&S CYCLE H-Grind Camshaft — Gear, for '48–'84 Big Twins, fits 74" and 80"

OEM-spec hydraulic H-Grind camshaft, reproduces stock '48–'84 Big Twins cams; ideal for 74" and 80" restorations. Compatible with generator and alternator engines.

€200.80 €252.43

Stainless Steel Braided Hose — 9.5 mm (3/8"), 91 cm (3'), Fuel, Oil

-€5.71

DRAG SPECIALTIES Stainless Steel Braided Hose — 9.5 mm (3/8"), 91 cm (3'),...

Braided hose for oil and gas applications. Do not use with fuels over 10% alcohol.

€16.14 €21.85

-€192.09

S&S CYCLE 551G Gear Drive Camshaft Kit — 551 Series grind

Bolt-in cam set for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque and timing accuracy; professional installation required.

€747.05 €939.14

-€84.68

S&S CYCLE 551C Chain Drive Camshaft Kit — Chain, 551 Series

Bolt-in cam set for 96–106 CID engines; improves low and midrange torque. Fits models with hydraulic tensioner chain drive.

€329.33 €414.01

-€84.68

S&S CYCLE 583C Chain Drive Camshaft Kit — 583 Series grind

Great cam for Softail and Dyna; strong low-end torque and horsepower. Best from 1500–5000 rpm. Installer must check coil bind and clearances. Not for compression ratios > 10.1:1.

€329.33 €414.01

-€95.34

S&S CYCLE 640 Easy Start Camshaft Kit — 95/96/103/110 cu in, 10.5:1–11.5:1

Reduces starting compression for easier starts, then fully retracts at higher rpm for full performance. For 95/96/103/110 engines, 10.5:1–11.5:1. Not for models with OEM compression releases. High-lift springs and adjustable pushrods required.

€370.77 €466.11

Reaper® 505/515 Cam — 505/515 grind, Exhaust lift 0.515 in, Intake lift 0.505 in

-€92.57

FEULING OIL PUMP CORP. Reaper® 505/515 Cam — 505/515 grind, Exhaust lift 0.515 in,...

Produces a wide powerband in stock engines; split-lift design for strong top-fuel sound; compatible with stock pushrods and valve springs; fueling recommends new lifters with new camshafts.

€360.00 €452.57

-€35.45

FEULING OIL PUMP CORP. Camshaft Installation Kit — FEULING PARTS, 2058, Standard

Complete camshaft installation kit with precision bearings, ARP® fasteners, gaskets and assembly compounds for dependable installation.

€137.85 €173.30

-€43.40

FEULING OIL PUMP CORP. Camshaft Installation Kit — Plus, 2059

Complete kit with roller bearings, Koyo Torrington® needles, 12‑point ARP® bolts, gaskets and O‑rings; plus and quick‑change options; made in USA.

€168.76 €212.16

-€109.47

S&S CYCLE HP103 Easy Start Camshaft Kit — Grind HP103, Chain

Easy-start camshaft kit for 103" engines; bolt-in design, high-rpm power band, includes hardware. Not for models with OEM compression releases.

€425.73 €535.20

Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

-€5.79

DRAG SPECIALTIES Stainless Steel Mini-Clamps — For 3/8" oil/fuel lines, 10 pack

Compact clamps for small-diameter hoses and tubing. Designed for use on oil and gas lines up to 3/8" in diameter. Made in the USA.

€16.36 €22.15

-€101.30

S&S CYCLE 640 Easy Start Camshaft Kit — Chain, S&S CYCLE 330-0331

Reduces crank compression for easier starts, then restores full compression for normal running. Fits 95", 96", 103" and 110" engines with 10.5:1–11.5:1 compression; requires high-lift springs and adjustable pushrods. Not for models with OEM compression releases.

€393.94 €495.24

-€5.78

DRAG SPECIALTIES Chrome Rocker Oil Lines — Chrome

Overhead oil line set with crossover and crankcase-to-rocker box line; includes fittings and seals.

€16.34 €22.12

-€216.89

S&S CYCLE MR103 Easy Start Camshaft kit — Gear type

Bolt-in camshaft kit for easier starting on 103" engines; restores full compression once running. Includes cams and hardware; installer must verify clearances.

€843.44 €1,060.33

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company