Engine (4)

-€16.94

FEULING OIL PUMP CORP. Outer Camshaft Bearing Kit — Camshaft, Kit

Includes one front ball bearing and one rear roller bearing with race for camshaft applications. Manufactured by Timken® Fafnir® and Koyo® Torrington®. Made in the USA.

€65.86 €82.80

-€14.58

FEULING OIL PUMP CORP. Cam Chain Tensioner — Stock Replacement, PN 8073

Precision billet aluminum housing with injection-molded nylon pad enhanced with PTFE. Single-piston design matching stock pressure, includes ARP® 12-point hardware. Made in USA.

€56.82 €71.40

-€159.84

FEULING OIL PUMP CORP. Race Series® Chain Drive Camshaft Kit — Chain Drive, P/N 1459

Complete Race Series® camshaft kit with Reaper® cam, full-travel hydraulic lifters (0.200" travel), gasket/o-ring kit, ARP cam/crank fasteners and installation kit. Made in the USA. Not for '23-'24 models with 121" VVT motors.

€621.59 €781.43

-€181.90

FEULING OIL PUMP CORP. HP+® High Volume Oil Pump — Red

High-volume pump increases oil pressure and flow, reduces temperatures and wet sumping; bench-tested relief valve and proven performance gains on M-Eight.

€707.36 €889.26

-€204.97

FEULING OIL PUMP CORP. Race Series Oil Pump/Camplate Kit — Red

High-performance oil pump and camplate kit that increases oil pressure and flow, reduces temperatures, and corrects common factory scavenge issues for M-Eight engines.

€797.13 €1,002.10

618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°, Exhaust lift 0.618", Intake lift 0.608"

-€82.27

FEULING PARTS 618 F Series Chain Drive Camshaft — Exhaust 264°, Intake 242°,...

Race-oriented camshaft for high-performance engines. Requires supporting high-lift valvetrain, ported heads and intake; check clearances and match Race Series oiling system.

€320.52 €402.79

-€67.88

FEULING PARTS 487 Series Chain Drvie Camshaft — Chain Drive, Reaper

Aggressive bolt-in cam for 4.25" stroke, 114"–117" engines. Wide powerband; responds well to increased bore, compression, exhaust and intake changes. Specs measured at 0.050" with a 1.61 rocker ratio. Manufacturer advises against tuning beyond stock emissions.

€264.49 €332.37

-€59.01

FEULING PARTS Inner Cam Bearing — 20 Pack

Heavy-duty full-complement component designed for performance engines. Manufactured by Koyo® Torrington®. Made in the USA.

€229.52 €288.53

-€78.43

FEULING PARTS Inner Cam Bearing — 20-Pack, FEULING PARTS 2084

Heavy-duty full-complement bearing manufactured by Koyo Torrington in the USA for high-performance engine use.

€305.07 €383.50

-€6.76

FEULING PARTS FEULING PARTS PAD TENSIONER REPLACEMENT M8

PAD TENSIONER REPLACEMENT M8

€26.32 €33.08

-€45.08

FEULING PARTS Hydraulic Cam Chain Tensioner Kit — 8084

Complete hydraulic camchain tensioner kit for stock M8 models. Includes sprocket, pad, pin, and spacers. Made in USA.

€175.68 €220.76

Endurance Beehive® Valve Springs with Titanium Retainers — up to 0.650" lift, 375 lb @ 1.150" open height

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers — up...

Direct bolt-in valve spring kit up to 0.650" lift; includes titanium retainers, machined seats, shims, locks and Viton® seals. Made in the USA.

€295.24 €371.16

Endurance Beehive® Valve Springs with Titanium Retainers — up to 0.650" lift, Chrome-Silicon, Titanium retainers, Kit

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive® Valve Springs with Titanium Retainers — up...

Hi-tensile chrome-silicon Beehive valve springs with lightweight titanium retainers; direct bolt-in replacement up to 0.650" cam lift; includes seals and hardware.

€295.24 €371.16

-€6.00

FEULING OIL PUMP CORP. Sandwich Adapter Rebuild Kit — 1/8" NPT ports, oil filter kit

Replacement gasket, O‑ring and Allen hardware for sandwich adapter rebuilds; fits offset adapters with 1/8" NPT ports; made in the USA.

€23.34 €29.34

Viton® Valve Guide Seals — 5/16" stem, 4-pack

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16" stem, 4-pack

High-quality Viton® seals for valve guides with a spring-loaded wiper that minimizes oil carryover. Made in the USA.

€11.49 €14.44

$Viton® Valve Guide Seals — 5/16\", 4 pack$

-€2.95

FEULING OIL PUMP CORP. Viton® Valve Guide Seals — 5/16\", 4 pack

High-quality seals designed to handle high engine temperatures with a spring-loaded wiper that removes excess oil from the valve stem with minimal friction. Made in the USA.

€11.49 €14.44

-€6.99

FEULING OIL PUMP CORP. Valve Locks — 8-pack, triple-groove, steel

Secures valve retainers to valve stems; precision machined and made in the USA.

€27.18 €34.17

Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads — 0.650" spring lift, Titanium collar, NexTex finish

-€75.92

FEULING OIL PUMP CORP. Endurance Beehive Valve Spring Kit for Screamin' Eagle Heads —...

Direct bolt-in Beehive valve spring kit for Screamin' Eagle heads; supports up to 0.650" cam lift.

€295.24 €371.16

-€50.73

FEULING OIL PUMP CORP. Beehive® Valve Spring Kit — 0.3125" stem, Econo Beehive

Premium conical ovate wire beehive springs with lightweight retainers; complete kit with seats, shims, locks and Viton® seals. Direct replacement for many Big Twin and XL cams up to 0.574"/.585" lift.

€197.31 €248.04

High Load Beehive® Valve Springs — up to 0.750" lift, 415 lb at 1.215" open

-€81.03

FEULING OIL PUMP CORP. High Load Beehive® Valve Springs — up to 0.750" lift, 415 lb...

Race-proven Beehive® valve spring kit for high-lift cams, offering high fatigue life and precise valve control; includes retainers, seats, shims, locks and premium seals.

€315.11 €396.14

Dress-Up Engine Case Bolt Fastener Kit — Engine case, with balance shafts, Silver polished

-€23.94

FEULING OIL PUMP CORP. Dress-Up Engine Case Bolt Fastener Kit — Engine case, with...

Precision-rolled threads and wide under-head flange provide consistent torque and reliable sealing.

170,000 psi tensile strength and quality 12-point hardened bolts, manufactured to ARP®/Feuling® specifications.

€93.10 €117.04

Dress-Up 12-Point Cam Cover/Lifter Block Fastener Kit — stainless steel, polished silver

-€23.37

FEULING OIL PUMP CORP. Dress-Up 12-Point Cam Cover/Lifter Block Fastener Kit —...

Precision rolled threads and a wide under-head flange provide consistent torque and improved sealing. Includes lifter block, cam cover, oil filter adapter and crank sensor fasteners, plus moly assembly lubricant.

€90.86 €114.23

-€9.39

FEULING OIL PUMP CORP. Cam and Pinion Shaft Kit — Stainless Steel, Black

Precision cam and pinion shaft kit with rolled threads, wide under-head flange, 170,000 psi tensile strength; includes bolts, hardened washers, and camshaft retaining ring.

€36.50 €45.89

-€18.69

FEULING OIL PUMP CORP. 12-Point Exhaust Stud Kit — Black oxide, Stainless steel

Heat-treated 12-point exhaust studs with precision-rolled threads and a wide underhead flange for reliable sealing. Includes moly assembly lubricant and four studs. Made in the USA.

€72.72 €91.41

-€25.39

FEULING OIL PUMP CORP. Head Bolt Kit — For Sportster, Silver, Kit

Precision j-form threads resist galling and ensure consistent torque.

180,000 psi tensile strength outperforms OEM and grade 8 fasteners.

Includes all bolts for one motor and moly assembly lubricant; made in the USA.

€98.75 €124.14

-€62.22

FEULING OIL PUMP CORP. Head Bolt Kit — For Evo/Twin Cam, Silver

Complete kit with all head bolts and moly lubricant. Precision j-form threads, 180,000 psi tensile strength, made in the USA. Fitment: For Evo/Twin Cam.

€241.97 €304.19

-€47.06

FEULING OIL PUMP CORP. Cylinder Stud Kit — Black, Chrome, Chromoly steel

High-strength cylinder stud kit with precision J-form threads; includes assembly lubricant and thread sealant.

€183.05 €230.11

12-Point Rocker Box Fastener Kit — fits EVO engines '85-'99, Black

-€27.65

FEULING OIL PUMP CORP. 12-Point Rocker Box Fastener Kit — fits EVO engines '85-'99,...

Internal rocker housing fastener kit with 12-point heat-treated bolts, washers and moly lube; fits EVO engines '85-'99.

€107.51 €135.16

Dress-Up Engine Case Bolt Fastener Kit — Silver, Polished

-€23.36

FEULING OIL PUMP CORP. Dress-Up Engine Case Bolt Fastener Kit — Silver, Polished

Precision bolt set with rolled threads, wide under-head flanges and 170,000 psi tensile strength for reliable sealing and long-term durability.

€90.83 €114.19

Cam Plate and Oil Pump Fastener Kit — 12-point flange, chromoly steel, black oxide

-€9.33

FEULING OIL PUMP CORP. Cam Plate and Oil Pump Fastener Kit — 12-point flange,...

Optional kit for Feuling camplates and oil pumps; includes heat-treated ARP® bolts, precision-rolled threads, moly assembly lubricant, and 170,000 psi tensile strength.

€36.31 €45.64

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine