Engine (4)

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€21.02

PERFORMANCE MACHINE (PM) Scallop Points Cover — Chrome

Direct replacement timing cover with Contrast Cut™ finish; hardware and gasket included. Made in the USA.

€102.32 €123.34

Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12 in), 57.2 mm OD (2-1/4 in), Chrome

-€94.39

PRO-ONE PERF.MFG. Oil Cooler Kit — For 1"–1-1/4" frame tubing, 305 mm (12 in),...

Complete oil cooler kit with AN #6 fittings and frame-mount clamps.

CNC-machined billet aluminum construction for precise fit.

€266.80 €361.19

-€12.46

NAMZ Oil Sending Unit Cover — Billet aluminum, black

Protects the oil sending unit sensor and connector; precision-machined for a snug, low-profile fit. Made in the USA.

€48.43 €60.89

-€12.46

NAMZ Oil Sending Unit Cover — Black

Covers and protects the oil sending unit sensor and connector. Easy installation with a smooth, horizontal finish.

€48.43 €60.89

-€12.46

NAMZ Oil Sending Unit Cover — Black

Protects and conceals the oil sensor and connector; precision-machined for a secure fit. Made in the USA.

€48.43 €60.89

-€12.46

NAMZ Oil Sending Unit Cover — Polished Silver, Billet Aluminum

Provides neat coverage for the oil sending unit sensor and connector. Made in the USA.

€48.43 €60.89

-€12.46

NAMZ Oil Sending Unit Cover — Polished

Fits over the oil sending unit sensor and connector. Made from billet aluminum. Made in the USA.

€48.43 €60.89

-€12.46

NAMZ Oil Sending Unit Cover — Polished silver

Covers the oil sending unit sensor and connector; precision-machined for a consistent fit; made in the USA.

€48.43 €60.89

-€90.41

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Chrome

Direct replacement for the stock unit. Includes all hardware and gasket. Machined logo and multiple finish options. Made in the U.S.A.

€439.94 €530.35

-€90.41
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Black

Direct replacement for stock cover
Includes all hardware and gasket
Polycarbonate lens for a unique internal view
Available in multiple finishes
Made in the U.S.A.

€439.94 €530.35

-€90.41

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Black Ops™

Direct replacement cam cover with Vision design and polycarbonate lens. Includes all hardware and gasket. Available in Contrast Cut™, Platinum Cut™, and Black Ops™ finishes.

€439.94 €530.35

-€120.73

PERFORMANCE MACHINE (PM) Cam Cover — Black Ops finish

Direct replacement for stock cover. Includes all hardware and gasket. Race-inspired design improves heat dissipation. Durable two-layer gloss-over-texture finish. Made in the USA.

€341.19 €461.92

-€109.76

PERFORMANCE MACHINE (PM) Race Series Cover — Black Ops, 6-speed

Precision CNC-machined component that improves heat dissipation; includes chrome hardware and gasket.

€310.18 €419.94

-€91.45

PERFORMANCE MACHINE (PM) Race Series Cover — 6 Speed clutch, Black Ops

CNC-machined cover that improves heat dissipation, fits hydraulic and cable clutches, includes chrome hardware and gasket.

€258.49 €349.94

-€47.35

PERFORMANCE MACHINE (PM) Race Series Derby Cover — Black Ops™, Machined

Direct replacement derby cover for OEM primaries; race-inspired design improves heat dissipation. Hardware and gasket included. Made in the USA.

€184.10 €231.45

-€54.85

PERFORMANCE MACHINE (PM) Race Series Derby Cover — Machined, Black Ops finish

Race Series Derby Cover with race-inspired design, improved heat dissipation, machined logo; hardware and gasket included. Made in the USA.

€155.07 €209.92

-€65.86

PERFORMANCE MACHINE (PM) Transmission Top Cover — Black Ops finish, Race Series

Precision CNC-machined replacement for the OEM transmission top cover. Easy bolt-on installation with included hardware. Race-inspired design improves heat dissipation.

€186.09 €251.95

Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

-€85.84

ANDREWS Cam Set for Chain Drive — TW48 grind, ANDREWS, Pair

Broad-tip cams for baggers with stock motors; computer-assisted design; alloy steel construction with heat treatment; made in the USA.

€333.84 €419.68

57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust, 0.560" lift

-€85.84

ANDREWS 57 Series Grind Cam — TW57 grind, 236° intake, 240° exhaust,...

Bolt-in broad-tip cams for 96", 103" Limited and 110" CVO engines. Best performance between 2200–5600 rpm.

€333.84 €419.68

-€104.52

ANDREWS EZ-Install Pushrods — Chromoly, 4-pack

EZ-Install pushrods let you change cams and perform maintenance without removing rocker boxes or the gas tank. Made in the U.S.A.

€295.33 €399.85

-€101.56

ANDREWS N2 Grind Cams — Gear, 4 Pack

Proven N2 cam profile; runs to 6500 rpm with stock hydraulic lifters. Made in the U.S.A.

€394.98 €496.54

-€94.63

ANDREWS V8 Grind Cams — Chain, 4 Pack

Runs to 6500 rpm with stock hydraulic lifters; solids not recommended. Stock base circle sizes allow use of stock pushrods. Made in the U.S.A.

€368.02 €462.65

-€94.63

ANDREWS N6 Grind Cams Cam Kit — 264° duration, 0.500" lift

Cam profile for modified 1200s; runs to 6500 rpm with stock hydraulic lifters. Stock base circle allows use of stock pushrods. Made in USA.

€368.02 €462.65

Cams for Gear Drives — 26 Series grind, Intake 226°/0.490", Exhaust 266°/0.490"

-€95.89

ANDREWS Cams for Gear Drives — 26 Series grind, Intake 226°/0.490",...

Computer-designed cams made from heat-treated alloy steel; four-gear set required. Installer must verify coil bind and valve clearances.

€372.91 €468.80

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine