Engine (4)

-€10.86

ANDREWS Camshaft Drive Gear — 2.7670" diameter, P/N 212044

Precision camshaft drive gear engineered for reliable valve timing. Made in the U.S.A.; measured with .105 gauge pins.

€42.24 €53.10

-€10.60

ANDREWS Cam Drive Gear — Standard, 2.7354" diameter

High-quality heat-treated cam drive gear. Made in the U.S.A. Direct-fit replacement.

€41.20 €51.80

-€83.75

ANDREWS Cam Set for Chain Drive — 9 Series

Bolt-in cam set improving power from 1000–5400 rpm. Made from alloy steel billets; computer-designed profile. Uses stock springs. Installer must check clearances.

€325.69 €409.44

-€83.75

ANDREWS Cam Set for Chain Drive — Grind 48H, Pair

Broad-tip cams tuned for strong low- and mid-range torque. Computer-aided design, billet alloy-steel construction, and heat-treated for durability. Made in USA.

€325.69 €409.44

-€38.66

S&S CYCLE Piston Kit for S&S Motors — 3.500" bore, 80" displacement

Complete piston kit including pistons, rings, wrist pins and clips for a full motor replacement.

Manufactured to meet rigorous quality standards and built for durability.

€150.64 €189.30

640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines, 10.5:1–11.5:1 compression, 3,000–6,000 rpm

-€148.41

S&S CYCLE 640 Easy Start Camshaft Kit — 95"/96"/103"/110" engines,...

Reduces compression for easier starting; retracts at rpm for full compression. For 95"–110" engines, 10.5:1–11.5:1. Installer checks required.

€468.32 €616.73

-€123.45

S&S CYCLE Camshaft Kit with Inner Gears — 510 Series grind, Gear type

Complete camshaft kit with inner and outer gears plus installation hardware: gearcover gasket, bearings, oil passage block-off kit, retaining ring, o-ring and instructions.

€359.38 €482.83

-€10.05

S&S CYCLE Oil Control Valve — 310-1150, Black, Silver

Helps regulate oil flow to the cooler and heads. Durable billet aluminum construction, steel check ball retainer, easy to install. Made in the USA.

€39.08 €49.13

Cam Set for Chain Drive — 57 Series, Intake 236°, Exhaust 240°, Pair

-€83.75

ANDREWS Cam Set for Chain Drive — 57 Series, Intake 236°, Exhaust...

Computer-designed alloy-steel cam sets made in the USA; installer must verify clearances and splined cam drive sprocket compatibility.

€325.69 €409.44

Big Bore Piston Kit — Bore 4.250" , oversize +0.010" , stroke 4.500" , 128 cu in

-€131.17

S&S CYCLE Big Bore Piston Kit — Bore 4.250" , oversize +0.010" , stroke...

Complete kit with pistons, rings, wristpins, and clips for reliable performance.

€510.10 €641.27

-€126.80

S&S CYCLE Big Bore Piston Kit — 4.250" bore, 4.625" stroke, 131 cu in

Complete piston kit includes pistons, rings, wristpins and clip. Compression ratios listed are approximate and are calculated using the correct length cylinders as specified by S&S.

€493.09 €619.89

-€107.92

S&S CYCLE Piston Kit — 4.00" bore, 4.00" stroke, 100 cu in displacement

Forged flat-top pistons intended for S&S Super Sidewinder and other custom 4" bore engine applications, built for reliable performance and tight tolerances.

€419.69 €527.61

-€51.63

S&S CYCLE H-Grind Camshaft — Gear, for '48–'84 Big Twins, fits 74" and 80"

OEM-spec hydraulic H-Grind camshaft, reproduces stock '48–'84 Big Twins cams; ideal for 74" and 80" restorations. Compatible with generator and alternator engines.

€200.80 €252.43

-€192.09

S&S CYCLE 551G Gear Drive Camshaft Kit — 551 Series grind

Bolt-in cam set for 96–106 CID engines (9:1–9.9:1). Improves low- and midrange torque and timing accuracy; professional installation required.

€747.05 €939.14

-€84.68

S&S CYCLE 551C Chain Drive Camshaft Kit — Chain, 551 Series

Bolt-in cam set for 96–106 CID engines; improves low and midrange torque. Fits models with hydraulic tensioner chain drive.

€329.33 €414.01

-€84.68

S&S CYCLE 583C Chain Drive Camshaft Kit — 583 Series grind

Great cam for Softail and Dyna; strong low-end torque and horsepower. Best from 1500–5000 rpm. Installer must check coil bind and clearances. Not for compression ratios > 10.1:1.

€329.33 €414.01

-€119.17

S&S CYCLE 640 Easy Start Camshaft Kit — 95/96/103/110 cu in, 10.5:1–11.5:1

Reduces starting compression for easier starts, then fully retracts at higher rpm for full performance. For 95/96/103/110 engines, 10.5:1–11.5:1. Not for models with OEM compression releases. High-lift springs and adjustable pushrods required.

€346.94 €466.11

-€149.95

S&S CYCLE Big Bore Piston Kit — 4.250" bore, 4.375" stroke, 124 cu in

Includes pistons, rings, wristpins, and retaining clips. Compression ratios are approximate and calculated using specified cylinder lengths.

€326.56 €476.51

-€135.98

S&S CYCLE Piston Kit Big Bore 4.250" for M8 Models — 4.250" bore, 128 cu in

Forged aluminum piston kit engineered for durability and reliable engine performance. Ideal for rebuilds and upgrades.

€528.83 €664.81

-€109.47

S&S CYCLE HP103 Easy Start Camshaft Kit — Grind HP103, Chain

Easy-start camshaft kit for 103" engines; bolt-in design, high-rpm power band, includes hardware. Not for models with OEM compression releases.

€425.73 €535.20

-€119.17

S&S CYCLE 640 Easy Start Camshaft Kit — Chain, S&S CYCLE 330-0331

Reduces crank compression for easier starts, then restores full compression for normal running. Fits 95", 96", 103" and 110" engines with 10.5:1–11.5:1 compression; requires high-lift springs and adjustable pushrods. Not for models with OEM compression releases.

€376.07 €495.24

-€216.89

S&S CYCLE MR103 Easy Start Camshaft kit — Gear type

Bolt-in camshaft kit for easier starting on 103" engines; restores full compression once running. Includes cams and hardware; installer must verify clearances.

€843.44 €1,060.33

-€200.13

S&S CYCLE 635 H.O. Gear Drive Camshaft Kit — Gear drive, Raw finish

High‑lift camshaft kit for modified engines 106"+ displacement; increases accuracy by removing chain lash; requires professional installation and press.

€631.54 €831.67

-€14.81

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.4375 in, +0.030 in

Replacement ring sets for S&S pistons only. Rings come as sets for two pistons. Made in the USA.

€57.68 €72.49

Replacement Ring Set for S&S Pistons — Bore 3.4375", +0.050" piston, Domed, Set

-€14.27

S&S CYCLE Replacement Ring Set for S&S Pistons — Bore 3.4375", +0.050"...

Replacement ring set for S&S pistons. Includes rings for two pistons. Made in the USA.

€45.03 €59.30

Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit — S&S CYCLE Kit, PN 106-6027

-€55.80

S&S CYCLE Camshafts 54-84 Big Twins with S&S Valve Train Conversion Kit...

Quality camshaft kit for 1954–1984 Big Twin models; higher lift and improved valve timing. Quiet hydraulic operation when used with hydraulic conversion kits.

€162.43 €218.23

-€8.88

S&S CYCLE Replacement Ring Set for S&S Pistons — 3.625" bore, +0.040", Set

Replacement rings for S&S pistons. Includes rings for two pistons. Made in the U.S.A.

€28.01 €36.89

-€2.11

S&S CYCLE Idler Gear Shim — 1.37 mm (0.054 in)

Precision shims for circuit breaker drive and idler gear assemblies. Sold as a set.

€6.16 €8.27

-€2.65

S&S CYCLE Idler Gear Shim — 1.47 mm (0.058")

Precision shims for circuit breaker drive and idler gear assemblies. Improve gear mesh and reduce play for smoother operation.

€7.72 €10.37

585V Camshaft — Grind 585V, Intake 245°, Exhaust 260°, Lift 0.585", Raw

-€51.63

S&S CYCLE 585V Camshaft — Grind 585V, Intake 245°, Exhaust 260°, Lift...

Thoroughly tested S&S camshaft for 80"–96" engines; optimized for 3500–6000 rpm. Made in USA. Installer must verify clearances.

€200.80 €252.43

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine