Engine (4)

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Chain conversion

Fierce torque band and horsepower gains for large and small displacements.

Works from 2200–6250 rpm on large engines and 2500–6800 rpm on smaller high-revving builds.

Requires high-performance valve springs, pushrods, lifters, fueling work, and upgraded exhaust/intake/clutch.

€366.15 €460.30

V-Twin Top End Gasket Kits — 3.1875" bore, 1200–1450 cc, for '66–'84 Shovelhead

-€29.17
Out of Stock

COMETIC V-Twin Top End Gasket Kits — 3.1875" bore, 1200–1450 cc, for...

EST gasket kit with embossed stainless steel head, base, and rocker gaskets covered in proprietary rubber. Includes all gaskets, seals, and O-rings to rebuild the top end. Made in the USA.

€82.53 €111.70

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, Exhaust 248°, Intake 238°

More power than the 525 cams while maintaining low-end torque. Extremely smooth lobe profile for a quiet valve train and smooth cruise. Bolt-in for many 88"–103" engines; improves starting, throttle response and fuel mileage. Performance valve springs required on '99–'04 engines.

€366.15 €460.30

Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°, Exhaust lift 0.604", Intake lift 0.594"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°,...

High-performance camshaft that broadens the torque band and boosts horsepower across a wide range of displacements. Requires supporting high-performance components and tuning.

€366.15 €460.30

-€9.68
Out of Stock

COMETIC Transmission Gasket Kit — 5-speed

Complete set of gaskets, seals and O-rings for reliable, long-lasting sealing. Made in the USA.

€32.85 €42.53

Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift 0.594"/0.604"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°, Exhaust 260°, Lift...

Fierce-performing camshaft for large (103", 110", 124") and small 95" displacement engines; requires upgraded valve springs, pushrods, lifters, intake/exhaust and clutch.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255°/0.594", Exhaust 260°/0.604"

-€87.64
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255°/0.594", Exhaust...

Fierce-performing camshaft tuned for both large and small displacements; optimized for broad torque and horsepower gains across wide rpm ranges.

€340.80 €428.44

HP+® Camchest Kit — Chain drive, 543 Series grind, intake & exhaust

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, 543 Series grind, intake &...

Complete camchest rebuild kit for '99–'06 Twin Cam (except '06 Dyna). Includes all components for cooler temps, higher oil pressure and quieter operation.

€1,636.28 €2,057.04

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — For '99-'06 Twin Cam, gear drive

Complete camchest rebuild kit for '99-'06 Twin Cam (except '06 Dyna). Increases oil pressure and flow, lowers engine and oil temps, reduces blow-by, and includes all bearings, gaskets and hardware for installation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, '07–'17 Twin Cam, '06 Dyna

Complete camchest rebuild kit that improves oil flow, raises oil pressure, reduces engine and oil temperatures, and smooths operation. Fits '07–'17 Twin Cam and '06 Dyna.

€1,636.28 €2,057.04

HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — '07–'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07–'17 Twin Cam and '06 Dyna that increases oil pressure, lowers engine and oil temps, and smooths operation.

€1,636.28 €2,057.04

HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Gear drive, fits '07-'17 Twin Cam, '06 Dyna

Complete HP+® camchest kit for '07-'17 Twin Cam and '06 Dyna. Improves oil pressure, scavenge and cooling for cooler, more reliable operation.

€1,636.28 €2,057.04

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — Gear, Exhaust 248°, Intake 238°

Excellent bolt-in camshaft for stock to mid 96" and 103" engines; works well in many 88" and 96" applications. Smooth lobe layout for quiet operation and the smoothest cruise power band. Improves starting, throttle response and fuel economy; performance valve springs required on '99–'04 engines.

€366.15 €460.30

Reaper® 594 Cam — 594 Series, Intake 255° / 0.594" lift, Exhaust 260° / 0.604" lift

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series, Intake 255° / 0.594" lift,...

High-performance camshaft tuned for large-displacement 103", 110" and 124" engines and high-revving 95" applications; requires valvetrain, fueling and clutch upgrades.

€366.15 €460.30

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — for 74" and 80" engines

OEM-spec hydraulic replacement camshaft; H-grind reproduction of '48–'84 Big Twin stock cams. Ideal for repair and restoration of 74" and 80" engines.

€222.75 €280.03

H-Grind Camshaft — fits 74" and 80" engines, generator and alternator fit

-€57.28
Out of Stock

S&S CYCLE H-Grind Camshaft — fits 74" and 80" engines, generator and...

OEM-spec hydraulic camshaft reproducing stock '48–'84 Big Twin cams; ideal for repair and restoration of 74" and 80" engines. Available for generator and alternator engines.

€222.75 €280.03

-€51.63
Out of Stock

S&S CYCLE H-Grind Camshaft — H grind, for 74" and 80" Big Twin engines

OEM-spec hydraulic camshaft reproducing stock cams used in '48–'84 Big Twins; ideal for repair and restoration of 74" and 80" engines.

€200.80 €252.43

583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583", Exhaust 262°/0.583", Gear drive

-€213.10
Out of Stock

S&S CYCLE 583G Gear Drive Camshaft Kit — 583 Series, Intake 203°/0.583",...

Reverses rear cam rotation to increase cam lift capability and valve timing accuracy. Includes gears, bearings, gasket and instructions. Professional installation required.

€828.74 €1,041.84

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°

High‑performance cam that delivers strong mid and top end power while retaining low‑end usability. Requires carburetor/throttle body tuning, performance exhaust and intake, and upgraded valve train components. 2500–6900+ RPM.

€366.15 €460.30

-€112.20
Out of Stock

S&S CYCLE MR103 Easy Start Camshaft Kit — S&S Cycle, Chain

Bolt-in camshaft kit for 103" engines that eases starting by temporarily reducing compression, then returns to full compression. Improves midrange power (best 2500–5500 rpm). Includes camshafts and all necessary gaskets, bearings and hardware. Installer must verify coil bind and clearances.

€436.38 €548.58

-€86.79
Out of Stock

S&S CYCLE 635 H.O. Chain Drive Camshaft Kit — Grind 635HO, Raw finish

High lift camshaft kit for modified engines 106"+; not a bolt-in kit. Includes camshafts and hardware; installer must verify clearances.

€337.57 €424.36

-€104.59
Out of Stock

FEULING OIL PUMP CORP. Reaper® 580 Cam — 0.580" lift, 268° exhaust / 258° intake

High-performance camshaft that shifts the powerband higher for more top-end horsepower. Requires high-lift springs, upgraded pushrods and lifters, plus high-flow intake and performance exhaust.

€406.75 €511.34

-€8.89
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.120" spacer, 5-pack

Precision sprocket spacers to restore chain alignment. Made in the U.S.A.

€25.11 €34.00

-€8.89
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.130", 5-pack

Precision spacers that improve drivetrain alignment and durability. Made in the U.S.A.

€25.11 €34.00

-€8.89
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.140", 5-pack

Durable spacers for cam drive sprockets that maintain chain alignment and extend component life.

€25.11 €34.00

$Cam Drive Sprocket Spacers — 0.150\", 5-pack$

-€8.89
Out of Stock

EASTERN MOTORCYCLE PARTS Cam Drive Sprocket Spacers — 0.150\", 5-pack

Precision-machined spacers that ensure correct cam drive sprocket alignment and reduce wear. Made in the U.S.A.

€25.11 €34.00

-€12.90
Out of Stock

COMETIC Transmission Gasket Kit — COMETIC C9151

Comprehensive set of gaskets, seals and O-rings; made in the USA for long-term reliability.

€43.83 €56.73

Extreme Sealing Technology Rocker Box Gasket Kit — For S&S die-cast rocker boxes

-€13.37
Out of Stock

COMETIC Extreme Sealing Technology Rocker Box Gasket Kit — For S&S...

Complete gasket kit with all seals, O‑rings and bolt seals for both rocker boxes. Made in the USA.

€45.45 €58.82

Reaper® 543 Cam — 543 Series, 248°/238° duration, 0.553"/0.543" lift

-€62.84
Out of Stock

FEULING OIL PUMP CORP. Reaper® 543 Cam — 543 Series, 248°/238° duration,...

More power than 525 cams without sacrificing low-end torque. Smooth lobe layout for a quiet valve train and smooth cruise power band. Bolt-in for stock to mid 96" and 103" engines; also works well in 88" and 96" engines. Easier starting, improved throttle response and fuel mileage. 1900–6000 RPM power range. '99–'04 require performance valve springs; pushrods and lifters recommended.

€244.35 €307.19

-€62.84
Out of Stock

FEULING OIL PUMP CORP. Reaper® 594 Cam — 594 Series grind, Exhaust 260°, Intake 255°

High-performance camshaft for 95" to 124" engines—broad torque for heavy bikes and high-rev power for lighter machines; requires supporting high-performance components.

€244.35 €307.19

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine