Engine (3)

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

-€51.96
Out of Stock

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64
Out of Stock

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

Rocker Box Covers — Scallop, Black anodized, machined, Pair

-€110.29
Out of Stock

PERFORMANCE MACHINE (PM) Rocker Box Covers — Scallop, Black anodized, machined, Pair

Direct OEM replacements with all hardware and gaskets included. Race-inspired design improves heat dissipation. Sold in pairs. Made in the U.S.A.

€536.70 €646.99

-€69.36
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Scallop, Black, Platinum Cut™

Direct replacement for the stock cam cover. Includes hardware and gasket. Vision window with polycarbonate lens. Multiple finish options. Made in the U.S.A.

€337.53 €406.89

Rocker Box Covers — Platinum Cut, Black Polished Anodized, Scallop, Pair

-€116.50
Out of Stock

PERFORMANCE MACHINE (PM) Rocker Box Covers — Platinum Cut, Black Polished Anodized,...

Direct-fit replacements with included hardware and gaskets; race-inspired designs with multiple finish options; made in the U.S.A.

€566.99 €683.49

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€11.51
Out of Stock

KLOCK WERKS Oil Cooler Guard — Black

Precision-cut oil cooler guard that adds visual pop to the center of the oil cooler trim. Easy to install and made in the USA.

€44.75 €56.26

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

-€21.02
Out of Stock

PERFORMANCE MACHINE (PM) Scallop Points Cover — Chrome

Direct replacement timing cover with Contrast Cut™ finish; hardware and gasket included. Made in the USA.

€102.32 €123.34

-€90.41
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Chrome

Direct replacement for the stock unit. Includes all hardware and gasket. Machined logo and multiple finish options. Made in the U.S.A.

€439.94 €530.35

-€90.41
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Black

Direct replacement for stock cover
Includes all hardware and gasket
Polycarbonate lens for a unique internal view
Available in multiple finishes
Made in the U.S.A.

€439.94 €530.35

-€90.41
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Vision, Black Ops™

Direct replacement cam cover with Vision design and polycarbonate lens. Includes all hardware and gasket. Available in Contrast Cut™, Platinum Cut™, and Black Ops™ finishes.

€439.94 €530.35

-€120.73
Out of Stock

PERFORMANCE MACHINE (PM) Cam Cover — Black Ops finish

Direct replacement for stock cover. Includes all hardware and gasket. Race-inspired design improves heat dissipation. Durable two-layer gloss-over-texture finish. Made in the USA.

€341.19 €461.92

-€109.76
Out of Stock

PERFORMANCE MACHINE (PM) Race Series Cover — Black Ops, 6-speed

Precision CNC-machined component that improves heat dissipation; includes chrome hardware and gasket.

€310.18 €419.94

-€91.45
Out of Stock

PERFORMANCE MACHINE (PM) Race Series Cover — 6 Speed clutch, Black Ops

CNC-machined cover that improves heat dissipation, fits hydraulic and cable clutches, includes chrome hardware and gasket.

€258.49 €349.94

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine