Engine (3)

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

-€0.93
Out of Stock

COMETIC Dip Stick O-Rings — COMETIC, Buna, 5-pack

Premium fuel-resistant seals for long-term reliability and leak prevention.

€3.14 €4.07

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

-€57.28
Out of Stock

S&S CYCLE 450S Cam — Intake 236°, Exhaust 238°, Lift 0.475"

Dyno-tested S&S 450S cam delivering good low and mid-range torque. Bolt-in for lower compression motors up to 8.5:1. Recommend hydraulic lifters. Made in USA.

€222.75 €280.03

Reaper® 525 Cam — 525 Series grind, 236° exhaust duration, 226° intake duration

-€119.78
Out of Stock

FEULING OIL PUMP CORP. Reaper® 525 Cam — 525 Series grind, 236° exhaust duration,...

Bolt-in camshaft upgrade for stock 88" and 96" engines; widens the torque band, improves throttle response and fuel economy.

€338.55 €458.33

Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift 0.574"

-€141.31
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Intake 240°, Exhaust 255°, Lift...

Power band for modified engines; bolt-in for stock 96", 103" and 110" engines. Smooth cam-lobe design for quiet valvetrain. Made in USA. Performance pushrods, lifters and clutch recommended.

€399.38 €540.69

Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°, Exhaust Lift 0.630"

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series, Exhaust 263°, Intake 258°,...

High-performance camshaft that preserves low-end rideability while delivering strong mid and top end power. Requires supporting upgrades and professional tuning.

€366.15 €460.30

Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°, Lift 0.630", Chain, Pair

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® 630 Cam — 630 Series grind, Exhaust 263°, Intake 258°,...

Aggressive performance cam that preserves low‑end while delivering strong mid and top end power; requires intake/exhaust tuning and valvetrain upgrades.

€366.15 €460.30

-€27.33
Out of Stock

FEULING OIL PUMP CORP. Camshaft Installation Kit — FEULING PARTS, 2065, Standard

Complete camshaft installation kit with bearings, ARP bolts, gaskets and seals. Made in the U.S.A.

€106.26 €133.59

-€2.53
Out of Stock

FEULING OIL PUMP CORP. Bearing Retainer Plate — Cam, Steel

Cam bearing retainer plate and hardware. Recommended for use with all Twin Cam model cam plates. Made in the U.S.A.

€9.88 €12.41

-€7.77
Out of Stock

FEULING OIL PUMP CORP. Camplate Chain Tensioner Pins — FEULING PARTS, 8003, Pair

Made from heat-treated chromoly steel. Ensures proper press fit when changing Twin Cam chain drive cam plates or replacing chain drive tensioners. Made in the U.S.A.

€30.23 €38.00

High Flow Camplate — Chain drive, 7075 billet aluminum, FEULING PARTS, P/N 8011

-€136.27
Out of Stock

FEULING OIL PUMP CORP. High Flow Camplate — Chain drive, 7075 billet aluminum,...

Increases engine oil flow and volume, lowers engine and oil temperatures, adds cam journal protection; pressure-tested with relief valve set to 55–60 psi.

€385.05 €521.32

-€121.44
Out of Stock

S&S CYCLE 570 Easy Start Camshaft Kit — 570 Series grind, Chain

Temporarily reduces crank compression for easier starts, bolt-in kit that increases power from 3200–5700 rpm; includes camshafts and hardware. Installer must verify clearances. Not for models with OEM compression releases.

€472.27 €593.71

-€112.20
Out of Stock

S&S CYCLE 585 Easy Start Camshaft Kit — 88–124 CID, 585 Series grind

Easy-start camshaft kit for select 88–124 CID engines. Bolt-in installation; includes required hardware. Installer must verify clearances.

€436.38 €548.58

-€222.31
Out of Stock

S&S CYCLE 551 Easy Start Camshaft Kit — Easy Start, Gear

Easy-start camshaft kit that reduces compression at startup for easier cranking; bolt-in for stock or mildly modified Touring models. Includes camshafts and installation hardware. Not for models with OEM compression releases.

€864.53 €1,086.84

-€240.61
Out of Stock

S&S CYCLE 585 Easy Start Camshaft Kit — 585 Series grind, gear type

Eases cold starts by reducing starting compression; bolt-in kit with all required hardware. Not for models with OEM compression releases.

€935.67 €1,176.28

-€94.15
Out of Stock

FEULING OIL PUMP CORP. Reaper® Camshaft 574 Series — Chain, Pair

Bolt-in camshaft delivering a smooth valvetrain and broad power band for modified and stock 96", 103" and 110" engines.

€366.15 €460.30

Cylinder Base Gasket — 4.125" bore, 0.51 mm (0.020"), Viton coated steel

-€5.78
Out of Stock

COMETIC Cylinder Base Gasket — 4.125" bore, 0.51 mm (0.020"), Viton...

High-quality cylinder base gasket offering reliable sealing and long-term durability. Made in the USA.

€19.60 €25.38

-€7.38
Out of Stock

COMETIC Cylinder Base Gasket — Bore 3.500", Thickness 0.51 mm (0.020")

High-quality cylinder base gasket made from fuel-resistant materials with a Viton® coating and stainless steel core. Made in the USA.

€20.90 €28.28

570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°, Intake 240°

-€93.94
Out of Stock

S&S CYCLE 570C Camshaft Kit — 570 Series grind, Chain, Exhaust 255°,...

Designed for 88"–103" CID engines (9:1–10:1). Delivers strongest power from 3200–3700 rpm. Kit includes camshafts and installation components. Installer must verify clearances; requires high lift valve springs.

€365.33 €459.27

HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING PARTS 7201

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain drive, Intake & Exhaust, FEULING...

Complete camchest kit for '99-'06 Twin Cam (except '06 Dyna). Improves oil pressure, lowers temps, and includes pump, camshafts, lifters and all hardware.

€1,636.28 €2,057.04

-€420.76
Out of Stock

FEULING OIL PUMP CORP. HP+® Camchest Kit — Chain Drive, 574 Series

Complete camchest replacement kit for '99-'06 Twin Cam (except '06 Dyna). Restores reliability, increases oil pressure and flow, reduces engine and oil temperatures, and includes all necessary components for installation.

€1,636.28 €2,057.04

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

Cylinder Head Gasket — 1.02 mm, stock bore, MLS (multi-layer steel)

-€12.37
Out of Stock

COMETIC Cylinder Head Gasket — 1.02 mm, stock bore, MLS (multi-layer...

High-quality cylinder head gasket offering long-term reliability and fuel-resistant construction. Made in the USA.

€35.01 €47.38

Cylinder Head Gasket — Bore 4.017" , Thickness 0.76 mm (0.030"), MLS

-€23.07
Out of Stock

COMETIC Cylinder Head Gasket — Bore 4.017" , Thickness 0.76 mm...

High-quality cylinder head gasket built for long-term reliability. Fuel-resistant materials and reinforced layered construction provide a durable seal. Made in the USA.

€65.25 €88.32

Out of Stock

ANDREWS Cam Drive Gear

High-quality heat-treated gears made in the U.S.A. for Harley-Davidson motorcycles.

€40.89

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine