Engine (13)

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 21 Series grind, Gear Drive

Computer-designed, heat-treated alloy-steel cams. Four-gear set required for installation; installer must verify coil bind and valve clearances.

€382.53 €480.90

-€84.27
Out of Stock

ANDREWS Cams for Gear Drives — 26 Series, Gear Drive, Pair

Computer-assisted cam design for precise timing
Alloy steel billet construction with heat treatment
Made in the USA
Four-gear set required; installer must verify clearances

€327.68 €411.95

Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust 252°, 0.550" lift

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 55 Series grind, Intake 248°, Exhaust...

Computer-aided cam design; alloy steel billet construction with heat treatment. Made in the USA. Requires four-gear set; installer must verify clearances prior to final assembly.

€382.53 €480.90

-€10.68
Out of Stock

ANDREWS Cam Installation Kit — 216901

Complete kit with gaskets, bearings and installation hardware for gear-driven cams. Made in the U.S.A.

€41.53 €52.21

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 59 Series grind, Pair

Computer-designed cam sets machined from alloy steel billets and heat-treated. Made in the USA. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€94.59
Out of Stock

ANDREWS Cams for Gear Drives — Gear Drive, 67 Series

Computer-designed alloy-steel cams, made in the USA. Four-gear set required; installer must verify coil bind and valve clearances.

€367.82 €462.41

-€98.37
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series, intake & exhaust

Precision alloy-steel cam set for gear drive installations. Four-gear set required; installer must verify clearances.

€382.53 €480.90

-€95.89
Out of Stock

ANDREWS Cams for Gear Drives — 54 Series gear drive cam set, pair

Computer-designed alloy-steel cams for gear drives. Four-gear set required; installer must verify clearances.

€372.91 €468.80

Extreme Sealing Technology Complete Gasket Kit — For '89-'91 Softail/Dyna, 1.02 mm (0.040")

-€77.87
Out of Stock

COMETIC Extreme Sealing Technology Complete Gasket Kit — For '89-'91...

Full gasket kit with MLS head gaskets, Viton-coated base gaskets, AFM exhaust seals and valve stem seals. Made in USA.

€220.34 €298.21

-€51.96
Out of Stock

ANDREWS A2 Grind Cam — Exhaust 248° / Intake 242°

Fits 1966–1984 Big Twin engines (except 1980–1981). Increases mid-range and top-end power; idle is unaffected. Check spring travel and clearances on 1980+ models.

€202.08 €254.04

A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

-€44.64
Out of Stock

ANDREWS A2 Grind Cam — Fits 1966–1984 Big Twin (except 1980–1981)

Bolts into 1966–1984 Big Twin engines (except 1980–1981); increases mid- and high-rpm power while preserving idle.

€173.65 €218.29

B2 Grind Cam — Andrews, B2 grind, Gear type

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Andrews, B2 grind, Gear type

More mid-range and high-end power for street/strip with a smooth idle; ideal for 74/80-inch and small stroker engines.

€202.08 €254.04

Extreme Sealing Technology Complete Gasket Kit — For '04-'06 XL 1200, 3.500" bore, 1.02 mm (0.040")

-€45.03
Out of Stock

COMETIC Extreme Sealing Technology Complete Gasket Kit — For '04-'06...

Complete gasket kit featuring MLS head gaskets, steel Viton®-coated base gaskets, blue Viton valve stem seals, and AFM race-style exhaust gaskets. Includes motor gasket set plus primary, derby, and inspection cover gaskets where applicable. Made in the USA.

€127.43 €172.46

-€51.96
Out of Stock

ANDREWS B2 Grind Cam — Gear, Intake 256°, Exhaust 258°

Best cam for 74/80 inchers and small strokers; delivers strong mid and high-end power with a smooth idle. Spring spacing and main bearing boss clearance must be checked.

€202.08 €254.04

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust

Great street cam for 84–88-inch strokers; upgraded from the #6 grind with strong torque from 2,200–6,500 rpm.

€202.08 €254.04

-€0.93
Out of Stock

COMETIC Dip Stick O-Rings — COMETIC, Buna, 5-pack

Premium fuel-resistant seals for long-term reliability and leak prevention.

€3.14 €4.07

7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open, 29° intake open

-€51.96
Out of Stock

ANDREWS 7 Grind Cam — 7 Series, 268° intake/exhaust, 56° exhaust open,...

Great street cam for 84/88-inch strokers; upgraded replacement for the #6 grind, boosting torque from 2,200–6,500 rpm.

€202.08 €254.04

-€20.43
Out of Stock

COMETIC Primary Gasket Kit — Primary, Kit

Complete set of primary gaskets, seals and O-rings for inner and outer primary; heat resistant and high shape recovery; no sealer required.

€57.78 €78.21

Cylinder Base Gasket — 4.125" bore, 0.51 mm (0.020"), Viton coated steel

-€5.78
Out of Stock

COMETIC Cylinder Base Gasket — 4.125" bore, 0.51 mm (0.020"), Viton...

High-quality cylinder base gasket offering reliable sealing and long-term durability. Made in the USA.

€19.60 €25.38

-€7.38
Out of Stock

COMETIC Cylinder Base Gasket — Bore 3.500", Thickness 0.51 mm (0.020")

High-quality cylinder base gasket made from fuel-resistant materials with a Viton® coating and stainless steel core. Made in the USA.

€20.90 €28.28

-€10.86
Out of Stock

ANDREWS Cam Drive Gear — 2.7324" diameter, undersize -0.003"

High-quality heat-treated cam drive component, made in the U.S.A.; recommended for professional installation.

€42.24 €53.10

Cylinder Head Gasket — 1.02 mm, stock bore, MLS (multi-layer steel)

-€12.37
Out of Stock

COMETIC Cylinder Head Gasket — 1.02 mm, stock bore, MLS (multi-layer...

High-quality cylinder head gasket offering long-term reliability and fuel-resistant construction. Made in the USA.

€35.01 €47.38

Cylinder Head Gasket — Bore 4.017" , Thickness 0.76 mm (0.030"), MLS

-€23.07
Out of Stock

COMETIC Cylinder Head Gasket — Bore 4.017" , Thickness 0.76 mm...

High-quality cylinder head gasket built for long-term reliability. Fuel-resistant materials and reinforced layered construction provide a durable seal. Made in the USA.

€65.25 €88.32

-€51.96
Out of Stock

ANDREWS C Grind Cam — Gear, Duration 278°, Lift 0.525"/0.550"

More mid-range and top-end power for street and drag bikes; works with solid or hydraulic lifters. Made in the USA.

€202.08 €254.04

-€53.08
Out of Stock

ANDREWS N Grind Cam — Intake 234°, Exhaust 240°, Lift 0.348"

Stock Knuckle replacement cam for stock motors and classic engine restoration. Made in the U.S.A.

€206.42 €259.50

-€54.82
Out of Stock

ANDREWS S Grind Cam — S grind, 262° duration

Bolt-in performance cam with a smooth idle and a strong pull to 6000 rpm. Made in the U.S.A.

€213.22 €268.04

$PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake 0.400\"$

-€128.06
Out of Stock

ANDREWS PB+ Cams — PB+ grind, 254° duration, Exhaust 0.410\" , Intake...

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Installer must verify all clearances.

€498.02 €626.08

-€130.84
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm. Made in the U.S.A.

€508.83 €639.67

-€126.03
Out of Stock

ANDREWS PB+ Cams — Intake 254°/0.400", Exhaust 254°/0.410"

Bolt-in four-cam set that increases horsepower and torque. Stock springs OK to 7000 rpm; installer must verify clearances.

€490.14 €616.17

Extreme Sealing Technology Motor Gasket Kit — For '99-'06 Twin Cam, 3.875", 1.02 mm (0.040")

-€30.41
Out of Stock

COMETIC Extreme Sealing Technology Motor Gasket Kit — For '99-'06 Twin...

Premium gasket set featuring MLS head gaskets, Viton® coatings and AFM exhaust seals. Made in the USA.

€103.28 €133.69

shop by category

Engine

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Contact us

Products

Our company

shop by category

Engine  

Subcategories

Complete Engines

Performance Kits

Internal Parts

Cooling

Gaskets & O-Rings

Camshafts

Engine