Electrical & Ignition

Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10, 16–14, 22–18, 26–24 AWG, assorted colors

-€8.46

K&S TECHNOLOGIES Heat-Shrink Solderless Wire Connector Kit/Refill — 12–10,...

No soldering gun required; low-heat solder activates with a heat gun to create a watertight shrink seal. Packs come in a clear jar with barcode-labeled packs for easy counter or service use.

€23.84 €32.30

Solderless Wire Connectors — 20-pack, White

On sale!
-€10.94

K&S TECHNOLOGIES Solderless Wire Connectors — 20-pack, White

Solderless splices using low-heat solder that melts with a heat gun and creates a watertight shrink-tube seal.

€30.91 €41.85

$Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black$

On sale!
-€3.11

DEI Hi-Temp Shrink Tubes — 25.4 mm (1\"), 122 cm (4\'), Black

Professional-grade high-temp shrink tubing with 3:1 shrink ratio; forms a water-tight seal; heat to apply (120–180°F).

€12.10 €15.21

$Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black$

On sale!
-€19.06

DEI Hi-Temp Shrink Tubes — 9.5 mm (3/8\"), 15.2 m (50'), Black

Professional heat-shrink tubing, 3:1 shrink ratio, water-tight seal and wide operating temperature range.

€74.05 €93.11

$Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black$

On sale!
-€20.97

DEI Hi-Temp Shrink Tubes — 12.7 mm (1/2\"), 15.2 m (50'), Black

Professional-grade high-temperature shrink tubing with 3:1 shrink ratio, water-tight sealing, and broad operating range for wire and splice protection.

€81.43 €102.40

Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

On sale!
-€27.82

DEI Hi-Temp Shrink Tubes — 16.8 mm (11/16"), 15.2 m (50'), Black

Professional-grade shrink tubing with 3:1 shrink ratio for water-tight seals; operates from -67°F to 275°F. Apply with heat gun at 120°F–180°F.

€108.03 €135.85

Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

On sale!
-€40.96

DEI Hi-Temp Shrink Tubes — 25.4 mm (1") diameter, 15.2 m (50')

Professional-grade, military-spec polyolefin shrink tubing; 3:1 shrink ratio; seals to 33% of original diameter; operating range -67°F to 275°F; apply heat at 120°F–180°F; Made in USA.

€159.09 €200.05

Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

On sale!
-€17.40

DEI Hi-Temp Shrink Tubes — 6.4 mm (1/4"), 15.2 m (50'), Black

Professional-grade military-spec polyolefin heat-shrink tubing with 3:1 shrink ratio; protects against dirt, dust and solvents. Operates -67°F to 275°F; apply with a heat gun at 120°F–180°F.

€67.57 €84.97

High-Output Ignition Coil — 12V, 45,000V, Black

-€29.19

DAYTONA TWIN TEC LLC High-Output Ignition Coil — 12V, 45,000V, Black

High-output ignition coil that delivers stronger, more consistent spark for improved throttle response and reliability.

€113.51 €142.70

-€7.11

DAYTONA TWIN TEC LLC Universal Spark Plug Wire Kit — 36" wire length

Complete kit with plug wires, terminals and boots for many applications. Made in the U.S.A.

€27.65 €34.76

-€8.88

DAYTONA TWIN TEC LLC Universal Spark Plug Wire Kit — 24 in (61 cm), Black

Complete kit with plug wires, terminals and boots for many applications; made in the U.S.A.

€34.56 €43.44

-€15.58

TERRY COMPONENTS Starter Solenoid Repair Kit — 12V

Includes plunger assembly, contacts and spring. Made in the USA.

€44.05 €59.63

Starter Drive Clutch — 1.4 kW, P/N 550100

-€30.29

TERRY COMPONENTS Starter Drive Clutch — 1.4 kW, P/N 550100

Comes complete with bearings and drive clutch. Suitable for high-performance or OEM starters.

€117.80 €148.09

-€100.39

DAYTONA TWIN TEC LLC Internal Ignition System — Black, Gray, 3.0 Ω

Programmable internal ignition module with adjustable advance curves, selectable multi-spark mode, and four rotary timing controls for on-bike tuning.

€390.41 €490.80

-€86.23

DAYTONA TWIN TEC LLC Plug-In Ignition Module — Black

Advanced plug-in ignition with two adjustable advance curves, selectable multi-spark mode, five rotary switches; requires OEM coils under 1 ohm. Not for fuel-injected models.

€335.38 €421.61

-€2.16

K&S TECHNOLOGIES 12V Economy Horn — 12V, 69.9 mm, Black

Compact electric horn that adds style and safety and mounts almost anywhere.

€6.10 €8.26

-€2.14

K&S TECHNOLOGIES 12V Economy Horn — 69.9 mm (2-3/4"), Chrome

Add style and safety to your bike. Sized to mount almost anywhere.

€6.03 €8.17

-€2.33

K&S TECHNOLOGIES Spark Plug Cap — 14 mm, terminal nut, 90°, Black

Includes resistor cover and both end rubber caps for secure insulation and terminal protection.

€6.57 €8.90

Rear Amplifier Harness with Fader Function — WILD BOAR AUDIO WBAURH

-€17.17

WILD BOAR AUDIO Rear Amplifier Harness with Fader Function — WILD BOAR AUDIO...

Rear harness enabling radio fader control of front and rear volumes. Plug-and-play for quick installs; compatible with 4‑channel amps or two 2‑channel amps.

€48.52 €65.69

-€111.44

TERRY COMPONENTS Starter Motor — 12V, 1.4 kW

Rebuilt Nippondenso starter with upgraded internal components for extended service life.

Dyno tested and assembled in the U.S.A.

€433.38 €544.82

-€111.44

TERRY COMPONENTS Starter Motor — 12V, 1.4 kW, Chrome

Heavy-duty Nippondenso starter assembled in the USA and dyno-tested for reliable starting performance.

€433.38 €544.82

-€106.30

TERRY COMPONENTS Starter Motor — 12V, 1.4 kW, Black

Nippondenso starter assembled in the United States with heavy-duty components and precision testing for dependable starts.

€413.38 €519.68

-€272.68

TERRY COMPONENTS 2.0 kW Starter Motor — 12V, Chrome

Heavy-duty starter with reinforced internals, precision-ground clutch components, CNC billet mounting noses and complete dyno testing. Made in the USA.

€770.60 €1,043.28

-€162.76

TERRY COMPONENTS 2.0 kW Starter Motor — 12V, Black wrinkle

Heavy-duty starter with reinforced solenoid and clutch components, precision-ground parts, CNC billet mounting, and dyno testing for reliable high-torque starts.

€632.91 €795.67

-€162.76

TERRY COMPONENTS 2.0 kW Starter Motor — 12V, black wrinkle

High-torque replacement starter with hardened clutch components, CNC billet mounting, special assembly lube and full dyno testing.

€632.91 €795.67

-€96.88

TERRY COMPONENTS Starter Motor — 12V, 1.2 kW, Black

Reliable Nippondenso starter rebuilt with strengthened internal components, precision-ground clutch parts, CNC billet mounting, and full dyno testing.

€376.78 €473.66

-€223.79

TERRY COMPONENTS Starter Motor — 12V, 1.6 kW, chrome

Durable Nippondenso assembly with reinforced components, precision-machined mounting, and full dyno testing for reliable starts.

€632.43 €856.22

-€113.36

TERRY COMPONENTS Starter Motor — 12V, 1.6 kW, Chrome

Nippondenso units assembled in the U.S.A.; reinforced solenoid and clutch components; CNC billet mounting noses; dyno-tested for performance.

€440.82 €554.18

-€113.36

TERRY COMPONENTS Starter Motor — 12V, 1.6 kW, Black

Durable Nippondenso starter assembled in the U.S.A.; precision components, CNC billet mounting noses, and dyno-tested for performance and reliability.

€440.82 €554.18

-€31.05

TERRY COMPONENTS Starter Drive Clutch — 2 kW

Complete drive assembly with bearings; suitable for high-performance and OEM starter systems.

€120.74 €151.79

Electrical & Ignition

Contact us

Products

Our company