Electrical & Ignition

-€2.87

CUSTOM DYNAMICS Push Button Switch — 3 pack, black

Single-pole push-button switch with waterproof boot for weather protection.

€10.09 €12.96

-€10.79

K&S TECHNOLOGIES Hydraulic Brake Light Switch/Banjo Bolts — 9.5 mm (3/8"), black

Banjo-style switch assembly with two included sealing washers for secure, leak-resistant installation.

€23.13 €33.92

Auxiliary Handlebar Mounted On/Off Switch — 12 VDC, fits 7/8", 1", 1-1/4" handlebars, Black

-€10.05

CUSTOM DYNAMICS Auxiliary Handlebar Mounted On/Off Switch — 12 VDC, fits 7/8",...

Handlebar-mounted on/off switch for auxiliary lights. Includes three rubber insulators, hardware, and 18 AWG 60" wire leads. Fits 7/8", 1" and 1-1/4" handlebars.

€39.09 €49.14

Auxiliary Handlebar Control Mounted On/Off Switch — Black, fits Harley-Davidson®

-€8.04

CUSTOM DYNAMICS Auxiliary Handlebar Control Mounted On/Off Switch — Black,...

On/off handlebar switch for auxiliary driving or accessory lights. Direct OEM clamp-half replacement. 18 AWG 60" wire leads. Simple two-wire hookup with hardware included.

€31.27 €39.31

-€7.14

K&S TECHNOLOGIES Snail-Type Universal Horn — Black, 11-0300

Powerful 105–118 dB horn; 80 mm diameter; wire extension included.

€17.50 €24.64

ProBEAST® Dual Tone Air Horn — Cover 5-7/8" x 5-3/4", Does not fit V-Rod, Black

-€80.81

CUSTOM DYNAMICS ProBEAST® Dual Tone Air Horn — Cover 5-7/8" x 5-3/4", Does not...

Direct replacement for Harley-Davidson® stock "cow bell" unit; 104.9 db rating; heavy duty bracket and ABS cover; plug-and-play harness included. Does not fit V-Rod.

€228.43 €309.24

-€212.73

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12 V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; low-profile for easy installation.

€601.18 €813.91

-€118.35

TERRY COMPONENTS Starter Motor — 12V, 1.5 kW, Black

Upgraded Nippondenso assembly with reinforced internal components, CNC-machined mounting noses and full dyno testing; made in the USA.

€460.24 €578.59

-€12.69

K&S TECHNOLOGIES Universal Starter Relay — 12V

Universal starter relay kit with solenoid, brackets, extra terminal wires, blade fuses and mounting hardware for easy installation.

€35.86 €48.55

-€16.06

TERRY COMPONENTS Late Starter Output Shaft Gear — Starter Output Shaft, 555160

Quality OEM replacement gear for late starter clutches.

€45.39 €61.45

-€61.61

TERRY COMPONENTS Starter Drive Clutch — 1.5 kW

Comes complete with bearings and drive clutch; fits high-performance and OEM starters.

€174.10 €235.71

-€20.64

TERRY COMPONENTS Starter Brush Holder — 12V

High-quality OEM replacement starter brush holder for reliable starting and long service life.

€58.34 €78.98

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Chrome

Heavy-duty starter assembled in the U.S.A.; superior windings, thicker commutator, high-tolerance clutch, static balanced, low-profile for easy installation.

€516.38 €649.16

-€132.78

TERRY COMPONENTS Slugger 1.8kW High-Torque Starter Motor — 12V, Black

Heavy-duty Slugger starter assembled in the U.S.A.; superior windings and clutch for smoother, more reliable starting. Low-profile for easy installation.

€516.38 €649.16

-€108.72

TERRY COMPONENTS Rebuild Kit — 12V, Unfinished

Rebuild kit for electric reverse motors with all-new components and step-by-step instructions.

€422.81 €531.53

-€152.02

TERRY COMPONENTS 2.0 kW Starter Motor — 12 V, Chrome

High-torque replacement starter with precision-ground components, special lubrication and dyno-tested reliability. Made in the USA.

€591.22 €743.24

-€10.92

LA CHOPPERS Handlebar Extension Wiring Kit — 61 cm (24") wire length, Black

Complete handlebar wiring extension kit with crimped terminals, OEM color-matched wires, and heat shrink. Cut-to-length design for faster installs.

€42.48 €53.40

-€10.92

LA CHOPPERS Handlebar Extension Wiring Kit — 24" (61 cm), Black

Complete handlebar wiring extension kit with cut-to-length wires and pre-crimped terminals for faster installation.

€42.48 €53.40

$Handlebar Extension Wiring Kit — 51 cm (20\"), Black$

-€13.01

LA CHOPPERS Handlebar Extension Wiring Kit — 51 cm (20\"), Black

Complete handlebar extension wiring kit that simplifies installations and includes OEM-matching wires and heat shrink.

€50.63 €63.64

Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 9-pack, 24-18 AWG, Red

Superior connection compared to crimping. Wire ends lock between opposing cone shapes when hand tightened.

€9.86 €12.67

Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

-€2.81

CUSTOM DYNAMICS Posi-Lock® Wire Connector — 6-pack, 24–18 AWG, Red

Provides a superior alternative to crimping; locks wire ends between opposing cones when hand tightened for a secure mechanical connection.

€9.86 €12.67

-€26.24

LA CHOPPERS Handlebar Extension Wiring Kit — 24" (61 cm), Black

Complete kit with OEM-matched wires and heat shrink; cut-to-length for up to 20" Ape Hanger handlebars.

€102.05 €128.29

-€2.19

CUSTOM DYNAMICS Wiring Cage Clamp — 3-pin, 20 A

Compact spring-clip connector for joining multiple wires; accepts up to five 24 AWG wires per port.

€6.70 €8.89

-€2.64

CUSTOM DYNAMICS Mini ATC Fuse Holder — 3 A, 5-pack, Black, Red

Waterproof-boot mini fuse kit with five holders and pre-installed 3 amp fuses.

€9.26 €11.90

-€4.85

CUSTOM DYNAMICS TruBEAM® Headlamp Adapter Harness — Fits H4

Required when replacing stock dual-halogen headlamps with an LED headlamp or any other H4-based headlamp. Provides plug-and-play connection.

€17.02 €21.87

Handlebar Extension Wiring Kit — 19-1/2" wire, Harley Davidson®, Black

-€24.89

LA CHOPPERS Handlebar Extension Wiring Kit — 19-1/2" wire, Harley...

Saves time by streamlining handlebar wiring jobs
Includes wiring for electronic throttle control and materials to extend hand control wires
Terminals crimped on one end; cut-to-length design fits up to 20" Ape Hanger handlebars
Includes OEM color matching wires and heat shrink

€96.77 €121.66

$Electronic Throttle Control Extension — 20 cm (8\"), throttle-by-wire, Black$

-€13.06

BARNETT Electronic Throttle Control Extension — 20 cm (8\"),...

Enables easy handlebar height changes on bikes with electronic throttle control. OEM-type connectors for a reliable fit. Made in the USA.

€50.78 €63.84

-€13.11

BARNETT Electronic Throttle Control Extension — 12" cable

Allows easy handlebar height changes on electronic throttle models.
OEM-type connectors for plug-and-play installation.
Made in the USA.

€50.95 €64.06

$CAN Bus Wiring Harness Extension — 91 cm (36\"), handlebar, Black$

-€18.50

LA CHOPPERS CAN Bus Wiring Harness Extension — 91 cm (36\"), handlebar, Black

Plug‑N‑Play wiring harnesses for quick, clean installations. Made in the USA.

€71.94 €90.44

$CAN Bus Wiring Harness Extension — 99 cm (39\"), Handlebar, Black$

-€18.56

LA CHOPPERS CAN Bus Wiring Harness Extension — 99 cm (39\"), Handlebar, Black

Plug-N-Play harness extension for CAN Bus handlebar wiring. Made in the USA.

€72.18 €90.74

Electrical & Ignition

Contact us

Products

Our company